|
| 1 | Supply, Installation, Testing and Commissioning of exterior BIS registered LED RGBW flood lighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness, of Total System wattage not exceeding 200W with system lumen output > 9000 lm with all LEDs on , minimum system lumen efficacy > 43 lm/w. Luminaire shall be capable of producing dynamic color changing lightwith 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 454 mm±5% includingmountinghinge , diameter 340 mm ±5% with constant locking hinges for simple position control from various angles without special tools.Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor > 0.9.The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports.Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with five year Operation and Maintenance |
| 2 | Supply of exterior rated Architectural RGBW Linear LED Wall Washer luminaire; suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness with lens positioned screening to reduce the light spillage and die casted end caps, Total System wattage 40W with system lumen output should be > 2000 lm. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PMMA for each LED, offering beam angle of different types such as narrow(10˚), medium(25˚), wide(40˚,60˚) or elliptical(18˚x 35˚) as per the site requirement. Fixture should have Height 50mm ± 5% including surface mount base width 50mm ± 5% , length 1000 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. The rated voltage of the Luminaire should be 240Vac. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only, Luminaire shall be offered with integral BIS Approved Potted Driver of IP 67 rating made of extruded aluminium, Built-In Potted IP 67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection of 10kV with externally attached SPD & other safety test as per IS 15885 Part-2/ Sec 13, IEC60598-1. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Lifetime shall be at least L70B50 @ 50,000 burning hours at 50°C. . The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5). with five year Operation and Maintenance |
| 3 | Supply, installation, testing & commissioning of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe,2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universeshould be expandable from 2 to 4 DMX512 universes.It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet .Dmx controller should have network controllabilityfeature to control the scene remotely through LAN and triggered via UDP packets on port 2430.Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should haveIntuitive backlit keyboard with 10 presets and also have provision of kepad on devicefor changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta; clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment. with five year Operation and Maintenance |
| 4 | Supply, installation, testing & commissioning of DMX Signal Amplifier to boost the Signal, IP 65 rated module to enahce the depleting DMX Signals, should have IP 66/67 rates inbuilt connectors compatible with Luminaires. It should be offered with inbuilt electronic ciruit for functioning. with five year Operation and Maintenance |
| 5 | Supply of DMX address writer to write automatically address of DMX fixtures. with five year Operation and Maintenance |
| 6 | Supply, installation, testing & commissioning of DMX Splitter with Input Voltage range : 190-240V AC, Power Consumption 5W max.Housing is made of CRCA with powder coated finish Mounting, 19 inch rack mountable, Operation Temperature -30°C to +55°C, 8 Output with 3pin XLR terminal sockets, Ingress Protection Rating IP20. This unit takes the DMX Signal from DMX Controller & split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input.Splitters should be capable to amplify the DMX signal & allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX cable or maximum 20-25 fixture per outputchannel. To be provided with IP enclosure if installed in external environment. with five year Operation and Maintenance |
| 7 | Planning, Designing, Programming of all the light fixtures with integration into controller and making multiple programming in total of 5 different occasion. Synchronizing all fixtures into one. with five year Operation and Maintenance |
| 8 | 3C x 4 sqmm Cu unarmored multistrand with five year Operation and Maintenance |
| 9 | 4 x 16 sqmm Al armoured |
| 10 | Data cable Cat 6 with five year Operation and Maintenance |
| 11 | 16 sqmm |
| 12 | 16 sqmm |
| 13 | Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects |
| 14 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity |
| 15 | Supply, installation, testing and commissioning of PVC Pipe of size 20 mm as per requirement for cable layingand its protection. |
| 16 | Supply, installation, testing and commissioning of PVC Pipe of size 40 mm mm as per requirement for cable layingand its protection. |
| 17 | Supply, installation, testing and commissioning of Oil Cooled Servo Stabilizer of 6 KW Three Phase with Enclosure and connection to the main panel. with rating of 180-250 V stabilizong and maintaining a fixed voltage output of 220Volt for the entire system. With Supply and fixing ofsuitable capacity cubicle electrical control panel with servo bypass switch as required etc.complete in all respect. with five year Operation and Maintenance. |
| 18 | Supply and laying with 32MM GI pipe ISI DSR SI 2831 as per site requirement with five year Operation and Maintenance |
