Tender For Development And Execution Of Master Road With Length 850 Mtr From Sector 9/10 Dividing Road To Sector 6/7 Dividing Road (Balance Part Of Asset Id 1071), 100 Ft Road (Asset Id 10127) And Tigaon Road (Aid 10112) At Faridabad, Faridabad-Haryana
TDR : 48337255
Tender Notice
BOQ
Expired
Faridabad
Haryana
Tender For Development And Execution Of Master Road With Length 850 Mtr From Sector 9/10 Dividing Road To Sector 6/7 Dividing Road (Balance Part Of Asset Id 1071), 100 Ft Road (Asset Id 10127) And Tigaon Road (Aid 10112) At Faridabad
Name of Work: Development and Execution of Master road with Length 850 mtr From Sector 9/10 Dividing road to Sector 6/7 dividing road (Balance part of Asset ID 1071), 100 ft road (Asset ID 10127) and Tigaon road (AID 10112) at Faridabad
Sl. No.
Item Description
1
Providing and Fixing Perforated slab (300*1210*100).
2
Providing and laying 80mm -100 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.0% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications
3
Providing and laying 25 mm/ 50 mm thick mastic asphalt wearing course with paving grade itumen 85/25 or VG - 30/40 @ 10.2%, fine aggregates, course aggregates, lime filler @ 17.92% of total, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine-grained hard stone chipping at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces is not less than 1DDC, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 of MORTandH specifications (5th Revision, 2013)
4
Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per Sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specificationss
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
