|
| 1 | Providing and applying tack coat with VG.- 10using emulsion pressure distributor at the rate of 0.30 kg per sqm in the norms bituminous surface cleaned with mechanical broom . |
| 2 | Providing and layingbituminous concrete with 100-120 TPH batch type hot mix plantproducing an avarage output of 75 tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4percent of mix and filler , transporting the hot mix to work site , laying with hydostatic paver finisher with sensor control to the required grade , level and aligmnment , rolling with smooth wheeled , vibratory and tendom roller to achieve the desired compaction as per MoRT&H Specification Clause 509 complete in all respects. |
| 3 | Painting of railing with adequotecoats with enamel paint to give uniform finish |
| 4 | Supplying and installation of delinators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings. |
| 5 | Supply and fixing of Cat-Eye including all accessories required for proper completion of the work. |
| 6 | Direction and place identification signs upto 0.90 sqm. Size board . Providing and erecting direction and place identification retro-reflectorised sign as per IRC-87 made of high intensity grade sheeting. The Retro reflective sheeting shall be tested for a certificate of having sheeting tested for coefficient of tetro reflection, daytime colour and liminance, shrinkage, flexibility, liner removal, adhesion, impact resistance specular gloss and furgus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from Internation/Governmentlaboratory as per MoRTH specification No. 801.3.7 Sheet fixed over aluminium sheeting 2mm. thickwith area not exceeding 0.9 sqm. . Supported on a mildsteel single angleiron post 75x75x6mm. firmly fixed to the ground by means of proerly designed foundationwith M-15 grade cement concrete 45x45x60cm. below ground level as per approved drawing complete. |
| 7 | Providing and laying of hot applied thermoplastic compound 2.5mm. Thick including reflectorising glass beads @ 250 gms per sqm. Area, Thickness of 2.5mm. Is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and freee from streak and holes |
| 8 | Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 |
| 9 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger si |
| 10 | Constn. Of K.C. Drain including all materials labour tools and plants etc. Required for proper completion of the work. |
| 11 | Providing and laying boulders apron on river bed for protection against scour with stone boulder weighing not less than 40kg. Each complete as per drawing and technical specification. |
| 12 | Constn. OfPatri with approved materials obtained from borrow pits with all lifts and leas, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.1 & 300.2 with lead upto 1000m. As per Technical specification clause 301.5(By carted earth) |
