|
| 1 | Clearing heavy Jungle and Surface dressing of the ground. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification. |
| 2 | Earth work in all soils except hard rock requiring blasting and conveying for formation of bund with lead of 0 to 100 metre deploying earth moving machinery and tippers including benching, formation of bunds, breaking clods, sectioning etc., complete |
| 3 | Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete |
| 4 | Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost) |
| 5 | Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller. |
| 6 | Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth |
| 7 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 B. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications |
| 8 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 B. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications. |
| 9 | Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 20mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three crushed stone sandand Six hard broken stone jelly).Dummy columns should be at least 1 metre height) |
| 10 | Supplying and filling in foundation and basement with M- sand/ Filling sand in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification |
| 11 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 12 | For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. |
| 13 | Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m\") 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 14 | a) Upto basement |
| 15 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 16 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 17 | Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specificationsfor 10 sqm |
| 18 | Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of63mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, sand cushion 100mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 19 | Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed |
| 20 | Supply and fixing of Kiddies Safe Rotor Platform:16 gauge GI sheet & MS angle .LEG-3”GIpipe,Seat-16 gauge GI sheetProduct area : Ø 7’ftPlay area : Ø 10’ft |
| 21 | Supply and fixing of Circular Swing FRP:[Component]Frame :1 ½” Galvanished ‘B’ Class PipeTop Rail : 2” Galvanished ‘C’ Class PipeReinforced : 1 ½”- GI ‘B’ Class Pipe)Seat : FRP Seat (Glass)-2 Painting with PU coatingProduct area : 10’ft * 5’ft Play area :15’ft * 10’ft |
| 22 | Supply and fixing of Merry go round – 6 Seater (FRP)Height :3” GI Pipe, 2.5mm thick, b classSeat size:15” X 14”, paint: pu coating |
| 23 | Supply and fixing of Horizontal Ladder Material:1 ½” & ¾” Galvanished ‘B’Class pipe Height : 7’ft Product area: 2’ft * 10’ft.Play area : 4’ft * 14’ft |
| 24 | Supply and fixing of See saw 4 seater Fiber reinforced plastic of Width 7ft 0” and Supporting Frame made of 40mm Stainless Steel pipes and Swinging Arm made of 50mm Stainless Steel pipes of length 8ft 0”.Handle made of 19mm Stainless Steel pipes Seats are fiber reinforced plastic etc. |
| 25 | Supply and fixing of Swing 2 seater Height of 7ft 0” above the ground level and width of 10ft 0”. Legs made of 40mm Stainless Steel pipes and Cross Bars made of 50mm SS pipes Seats fiberreinforced plastic seats suspended with 6mm thick in coated chain etc |
| 26 | Supply and fixing of Roller SlideHeight 7ft above the ground level and Width 20”, Sliding chute 14ft fitted with rollers Area provided 5ft x 20ft All Stainless Steel Pipes etc., |
| 27 | Supply and fixing of Spiral Slide Senior. Made of fiber reinforced plastic of height 8ft above theground level and Bed 2ft 6” x 2ft, having ladder 10ft all Stainless Steel pipes etc., complete |
| 28 | Supply and fixing of Circular Climber Material :1” & ½” Galvanished ‘B’ Class pipe Height:10’ft Product area : Ø 6’ftPlay area: Ø 8’ft |
| 29 | Supply and fixing of Wave Slide 8ft FRP: [Component] Ladder : Galvanished ‘B’ Class pipe Sliding chute 9ft BED LEG :Galvanished ‘C’ Class pipe Height :5ft FRP thickness 4mm. (Reinforced Polymers in 5 Layers) 450 CSM Matt, 600 Roving Mat, Isotolic gel coat with PU pigment.Painting with PU coating width :2ft [Required area] Product area :21/2’ft * 12’ft |
| 30 | Supply and fixing of Giraffee SlideSlide: FRP slide(12’ftlength),Frame-1”GI pipe &10mm rod Product area: 3’ft* 16’ftPlay area :6’ft * 24’ft |
| 31 | Supply and fixing of Elephant Slide FRP Material :16 gauge galvanished sheet, MS angle, MSflat &G I pipe Slide : FRP Slide (10’ft length) C Product area: 3’ft * 21’ft Play area:6’ft * 25’ft |
| 32 | Supply and fixing of Duck Rider:[Component] LEG :Galvanished ‘C’ Class pipe Galvanished ‘B’ Class pipe Spring: Mild steel spring duck : FRP withIsotolic gel coat with UV pigment. Painting with PU coating [Required area] Product area : 3ft *3ft Play area : 5ft*5ft [Measurement]Width:3ft |
| 33 | Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no.4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only (SD 619) |
| 34 | Supply and laying of 4C X 10sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. ( SD - 203) |
| 35 | Supply and fixing of brass cable gland for 4C x 10 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc. |
| 36 | Earthing as per PWD standard with an earth electrode of 2meter Class \"B\" GI pipe of dia not less than 32mm complete with necessary masonary work(SD-212) |
| 37 | Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work ( SD 76) |
| 38 | Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connectionand etc to complete the work |
| 39 | Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work (SD - 75) |
| 40 | Supply, erection, testing and commissioning of 8 mtr free standingSingle arm bracket 8 sided octagonally continuosly tapered strcutured pole with base plate of size 300 x300 x 12mm as per IS-875 along with 120W LED fitting with following specification. Bottom pole dia -130mm,Top Pole dia -70mm , Thickness of pole -3mm.The pole should be hot dip galvanizedconfirming toBESN ISO - 1461 with thickness of65 Micron. Construction of pillar accommodating MCB and switch housed in weather proof box including wiring to the light fittings with 2 runs of 2.5 Sq.mm PVC insulated copper conductor,supplying and fixing 4 way 30 A rated terminal block loop in loop out cable arrangements coil earthing etc. the rate shall included for cable in and out throughtGI pipe. The pole shall beas required by the Engineer in charge and complete with suitable pressure die cast aluminum housing also adhering to the above said specifications.Note:-The rate shall be quoted for complete set of Pole, Base foundation,Anchor fastener,internal wiring,earting materials,6A DP MCB box and all necessary accessories and civil cost etc should be provided as suitable to the requirement |
| 41 | Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-658) |
| 42 | Internal Water Supply P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. |
| 43 | 25mm dia Pipe |
| 44 | 32mm dia Pipe |
| 45 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 46 | Coupler |
| 47 | 25mm dia Pipe |
| 48 | 32mm dia Pipe |
| 49 | Elbow |
| 50 | 25mm dia Pipe |
| 51 | 32mm dia Pipe |
| 52 | BEND |
| 53 | 25mm dia Pipe |
| 54 | 32mm dia Pipe |
| 55 | Tee |
| 56 | 25mm dia Pipe |
| 57 | 32mm dia Pipe |
| 58 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 59 | 25mm |
| 60 | 32mm |
| 61 | Supplying and fixing ofapproved make of GM Non return valve, suitable for both horizontal & vertical application conforming to BS 1982 tested to a pressure of15 Kg/sqcm. Including rubber gasket,flanges, union, nuts, bolts, washers & paintingcomplete as required, shutter of brass/SS304 conforming to ASTM B159. as directed by Engineer-Incharge. |
| 62 | 32mm |
| 63 | Construction of sewer chambers of internal dimension of 600x600mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling. |
| 64 | Supply and installation of equivalent approved make,For pumping the Irrigation water from well to Monoblock.Each Pumps shall deliver 6m3/hr @ head of 35mtr.,Skid mounted twin booster system withfixed speed system.1 working. of5.0 HP Submersible Pump mounted on a common base frame, with common galvanised delivery manifold.2no.s of gate valve and 2nos of non return valves.Control panel, Three phase preventer, with dry run control provision. |
| 65 | Supply, Fixing & Commissioning of flexible 16mm inline tubingPC Drippers with resistance to UV damage, algae growth brown incolour, Longer lateral run lengh withflow rate 2.3lph / 4.0 lph, pressure rating 0.58 to 4.1 bar , Dripper Spacing at 30 cm / 45 cm Spacing wall thickness 1.2mm etc., complete, the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 66 | Supply, Fixing & Commissioning of Emitters pressure compensating for Consistent & Reliable Flowwith self flushing emitter, and selfpiercing barbs, flow rates 2 lphor 4 lph or 8 lphUV resistant colour coded with working pressure 1.0 to 3.5bar etc., complete,the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 67 | Supply,Fixing & commissioning of Gromatetake offConnects XF Series Drip Line and Blank Tubing to PVC Mainlines at Low Pressures. 17mm GTO etc., complete,the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 68 | Supply,Fixing & commissioning of HighQuality Barbs Grab Tubingfor a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - ObtrusiveBrownColored Fittings of 17mm Tee . etc., complete,the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 69 | Supply,Fixing & commissioning of HighQuality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - ObtrusiveBrownColored Fittingsof 17mm COUPLING. etc., complete,the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 70 | Supply,Fixing & commissioning of HighQuality Barbs Grab Tubing for a Secure Fit. Unique Barb Design to Reduce Insertion Force. Non - ObtrusiveBrownColored Fittingsof17mm ELBOW. etc., complete,the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 71 | Supply,Fixing & commissioning of 17mm End cap S Type for dripline closure at the end of the dripline etc., complete,the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 72 | Supply,Fixing & commissioning of a double acting airand vaccum release 1/2 \" Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Only for Drip Irrigation etc., complete,the rate including cost of all materials, labour charges, transportaion charges etc., complete complying with standard specifications as per the direction of departmental engineer-in-charge. |
| 73 | GST at 12 percentage |
| 74 | GST at 18 percentage |
