Maintenance of earthing and public releated work at 1912 customer care MVVNL - Dismantling old plaster or skirting raking ou joints and cleaning the surface for plaste including disposal of rubbish to the dumping ground within 50 metres lead. (15.56) Providing and laying in position cemen concrete of specified grade excluding the cost o centering and shuttering - All work up to plinth level:1:5:10 (1 cement: 5 coarse sand (zone III) derived from natural sources: 10 gradec stone aggregate 40 mm nominal size derivec from natural sources) (4.1.10). Providing and laying in position cemen concrete of specified grade excluding the cost o centering and shuttering - All work up to plinth level: 1:12:3 (1 Cement: 1½ coarse sand (zone III) derived from natural sources: 3 gradec stone aggregate 20 mm nominal size derivec from natural sources) (4.1.2). Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) (6.1.2) Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor level in all shapes and sizes in Cement morta 1:6 (1 cement: 6 coarse sand) (6.4.2) 12 mm cement plaster of mix :1:6 (1 cement: coarse sand) (13.4.2) Neat cement punning. (13.18) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (10.2) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (5.22.6) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (13.8) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 1tr/10 sqm over an under coat of primer applied @ 0.80 1tr/10 sqm of approved brand and manufacture (13.48.3) Distempering with Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less tham 50 gram/litre (13.41.1) Wiring for light point/ fan point/ exhaust fan point/ call bell/power point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. Group C (1.10.3) Wiring for light point/ fan point exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. Group C ( 1.17.12) Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. (10.5.1) Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. (28.41) Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (1.14.2) Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (1.14.3) Supply and Fixing of 3 blade fan of Havells platina 400 mm or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge. (28.37) Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge(.28.38) Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters (9.5.1.1) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg sqm including grouting the joints with white cement and matching pigments etc., complete..Size of Tile 600x600 mm (11.41.2) Providing and laying Ceramic glazed tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.(11.38) Providing and Applying one coat of DI PRIMER for prime sealing (Addcon or Star equivalent make) over the prepared surface using a brush. if the surface is very porous two coats could be applied with a gap of 2-3 hours between each coat. one coat as per manufactures specifications including supply of all material, labour and T&P etc for proper completion of work as per direction of Engineer Incharge(NSI) Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.(80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.) (16.91.2) carpentar (0156) Supply & installation of electrical control panel of L&T Havells or equivalent make for submersible pump pumpset containing contractor relay condenser. b) for 1.5/2 H.P pump set single phase 19.31b Supply & Installation of submersible pump of K.S.B/CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. b) 1.5 HP outlet 40mm dia. or more, Head 71/36, Discharge 2000/6000 LPH (19.32 b) Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (19.34)
