Furnishing Of Mobile Sales Van In Palakkad District-2 Inside dimesion 4.20x2.00x1.98 metre providing display shelf of width 40 c.m using frame work of MS square pipe 38mm x 38 mm, 1.6mm thick with 4 Nos of partition. Providing 16 mm thick IS 303 grade plywood as rack and providing 6mm thick IS 303 sliding shutter for the bottom rack of 60 cm height including providing painting with putty finish by using ASPA paint. Providing sales counter with drawer and locking arrangement using 16mm thick IS 303 grade Plywood of size 2.10 x .60 x .80 metre including paintingwith putty finishing. Providing falseceiling using 6mm thick fibre cement board (E board or Equivalent Board) with necessary suitable size Aluminium section as required. 3 Providing 1 No of door in the left side as providing two Nos of window opening of both side of the door with provision for shutter with steel frame of 50x50 mm section and shutter with GI Sheet including painting 2 coat over metal primer. Electrification work with IS standard material with modular switches suitable size wires, plug including 8 Nos of surface mounting pannel light 12 watts, and 1 nos of suitable size exhaust fans. Painting of complete interior and exterior wit ASPA paint with wallputty etc. Complete as per the direction of officer incharge.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
