|
| 1 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160° C with a special applicator machine complete with a special applicator complete with labour material and traffic diversion arrangements. |
| 2 | Construction of speed breaker of IRC standard having width of 3.70 M including cost of stone aggregate (50-25 mm) size hire charges for roller for consolidation and compaction and other machines required for the work (including cost of bitumen) |
| 3 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm × 75 mm × 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm × 450 mm × 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801.600 mm circular |
| 4 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 × 75 × 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 × 450 × 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board. |
| 5 | Providing and fixing of road stud 100 × 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.as per MoRTH Specification Clause 804. |
| 6 | Solar Raised Pavement Markers: As per ASTM D 4280 &ASTM D 788 Supply & Installation of Solar Raised Pavement Markers made of Aluminium Alloy Body withSqure shape, solar powered, LED self illumination in active mode. The solar stud marker shall support a load of 25000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to lS:12063:1987 standard and should withstand temperatures in e of 10°C to 75°C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency blinking is 2Hz. There should be super bright LEDs (one gach side with over 5000 (Milicandle) luminous intensity) and its visibilty should not less than l000meter distance in night. The Height, width and length of the marker shall be less than 20mm,125mm, 125mm and it should have one cylinder type shank 30mm + / - 2mm and length of shank should be 60mm +1-5mm. Fixing will be by drilling holes on the road for the shanks ,to go inside, without nails and using epoxy resin based adhesive |
| 7 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160° C with a special applicator machine complete with a special applicator complete with labour material and traffic diversion arrangements. |
| 8 | Construction of speed breaker of IRC standard having width of 3.70 M including cost of stone aggregate (50-25 mm) size hire charges for roller for consolidation and compaction and other machines required for the work (including cost of bitumen) |
| 9 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 × 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings. |
