}

Tender For Special Repair On Doma Tikri To Sukhdeopur Road - Providing, Laying, Spreading And Compacting Stone Aggregates Of 22.4-53 Mm Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Threewh, hapur-Uttar Pradesh

Public Works Department has published Tender For Special Repair On Doma Tikri To Sukhdeopur Road - Providing, Laying, Spreading And Compacting Stone Aggregates Of 22.4-53 Mm Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Threewh. Submission Date for this Tender is 22-03-2025. Road Work Tenders in hapur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

48285942
Tender For Special Repair On Doma Tikri To Sukhdeopur Road - Providing, Laying, Spreading And Compacting Stone Aggregates Of 22.4-53 Mm Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Threewh
Open Tender
Indian
Uttar Pradesh
Hapur
22-03-2025

Tender Details

Tender For Special Repair On Doma Tikri To Sukhdeopur Road - Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static/vibratory roller in stages to proper grade and camber, applying and brooming, requisite type screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRT&H Specification Clause 404. including cost of, all material, labour, T&P,royality, Labour cess, all taxes complete. But excluding GST. 2 Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST. 3 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using VG -10 grade bitumen at 1.46kg per sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST. 4 Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 including cost of, all material, labour, T&P and Labour cess etc. complete but excluding GST. 5 Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. excluding Royallity. Wherever applicable for small work or Abadi area (Where machine con not reach/move)including cost of, all material, labour, T&P,royality, Labour cess, all taxes complete. But excluding GST. 6 Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30(Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with Power Trowel Cum Floter-Trimix Flooring Machine.Technical Specification Clause 1501 including cost of, all material, labour, T&P,royality, Labour cess, all taxes complete. But excluding GST. 7 Dismantling of old brick laid on edge kharanja including stacking of old bricks and laying of Interlocking Tiles of 60 to 80 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand, labour, T&P etc complete But excluding cost of GST andTile as directed by Engineer in charge. 8 Supplying and laying of NP-3 Hume Pipe 350 mm dia including cost of, all material, labour, T&P,Labour cess, all taxes complete. But excluding GST. 9 Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. excluding Royaltyincluding cost of, all material, labour, T&P,Labour cess, all taxes complete. But excluding GST. (1KM Cartage SOR No 253(a)) 10 Supply of Informatory Sign Board made of 18 gauge M.S.Sheet & frame of board angle iron of 40 x 40 x 6mm complete board size 3 x 4 and two no.post of board 10 (3 meter.) long of angle iron 40 x 40 x 6 mm with suitable whole-fast of angle iron of cross flat iron 25 x 5 mm with board.Complete board with primer coat & paint with in red oxide paint complete. includingcost of all material,Labour, T&P, labour cess, Royality and all taxes complete but excluding GST.

Key Value

Document Fees
INR 2714 /-
EMD
INR 400000.0 /-
Tender Value
INR 40 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail