Tender For Repairing Renovation Toilet For Gp Market Complex At Chakulia Gram Panchayat
Tender Value
3.48 Lakhs
Estimated cost
Bid Submission
26 Mar 2025
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chakulia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Renovation Toilet For Gp Market Complex At Chakulia Gram Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. |
| 3 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.(a) upto 150 mm. thick |
| 4 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes Pakur veriety |
| 5 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary)cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.in Ground Floor JSW / JSPL / SHYAM / SRMB / BMASL / ELECRO STEEL / SSLii) Tor Steel Rods / HYSD / Fe 415 / Fe 500 / Fe 500D |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge. |
| 7 | Brick work with 1st class bricks in cement mortar (1:4)(b) In superstructure, ground floor |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (a) 15 mm thick plaster (inside) |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (b) 20 mm thick plaster (outside) |
| 10 | Neat cement punning 1.5 mm thick in wall, dado, window sills, floors, drains etc. using cement @ 0.152cum./100sqm. |
| 11 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion |
| 12 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.i) On Steel Surface |
| 13 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : b ) On steel or other metal surface : |
| 14 | Supplying,Fitting & Fixing Factorymade P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, complete.( Page-115, Item-4.] |
| 15 | Supplying and laying true to line and level vitrified tiles ofPVC Door Shutter with -30mm thickSupplying fitting fixing in position approved P.V.C. door Shutter of approved quality and shade in position, the style & rail of PVC door shutter. The rate is inclusive all materials labour and hire of tools and plats and appliences)[Page - 135, Item - 27] |
| 16 | Add 18% GST = |
| 17 | Add Labour welfare cess @1% = |
AI Tender Summary
Tender Timeline
Mar 17, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 26, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 31, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender