Tender For Improvement Work At The Identified Accidental Location From Km 163.025 To Km 163.525 (Near Gumga Village) In Project Section Of Shivnagar-Ambikapur Of Nh- 130 Under Contingency Head Of Work Of Rehabilitation And Up-Gradation Of Nh-111 Shiv, Ambikapur-Chhattisgarh
TDR : 48283024
Tender Notice
BOQ
Expired
Ambikapur
Chhattisgarh
Tender For Improvement Work At The Identified Accidental Location From Km 163.025 To Km 163.525 (Near Gumga Village) In Project Section Of Shivnagar-Ambikapur Of Nh- 130 Under Contingency Head Of Work Of Rehabilitation And Up-Gradation Of Nh-111 Shiv
Name of Work: Improvement work at the Identified Accidental location from km 163.025 to km 163.525 (near Gumga village) in project section of Shivnagar-Ambikapur of NH- 130 under contingency head of work of \"Rehabilitation and up-gradation of NH-111 from km 163.400 to 215.800 (Shivnagar to Ambikapur Section) in the State of Chhattisgarh to two -lanes with paved shoulders under NHDP-IV on EPC basis\" ( 111-CHH-NHDP-IV-2015-16-17)\"
Sl. No.
Item Description
1
Item Description
2
8.04 Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of retroreflective type sheeting and vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 40 x 40 x 5mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designedfoundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing andpainting all components of the signs and supports as per clause 7.2 of IRC:67 )Made of Class-C Micro Prismatic Grade Sheeting of Type-XI (for National Highways and State Highways)(iii) 75 cm equilateral triangle
3
(vi) 90 cm circular
4
8.06 Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retroreflectorised sign asper IRC :67 made of retroreflective type sheeting and vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)(A) Made of Class-C Micro Prismatic Grade Sheeting of Type-XI (for National Highways and State Highways)
5
8.13 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)
6
8.61 Providing and fixing Solar Blinker Light 300 mm dia, LED Aspect made of FRP/Poly carbonate with battery backup fitted on 150 mm dia MS pipe - 3.0 metre long from the ground level, firmly fixed to the ground by mean of properly designed foundation with M-15 grade cement concrete 60cm x 60cm x 60cm, below ground level.
7
8.25 Street Lighting (Providing and erecting street light mounted on a steel circular hollow pole of standard specifications for street lighting, 9 m high spaced 40 m apart, 1.8 m overhang on both sides if fixed in the median and on one side if fixed on the footpath, fitted with Sodium vapour lamp/LED lamp and fixed firmly in concrete foundation M-15, providing 2 coats of alluminium paint over steel pole etc. complete.)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.