|
| 1 | Provision :- 01 Nos - 100 KVA DTR |
| 2 | BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 100 KVA Distribution Transformer |
| 3 | Handling & Installation ofDistribution Transformer (100 KVA DTR) on DP, tightening with turn buckles on both sides, poles clamping and boting of base jumpering on HT side (Including hydra charges in urban area and chain pully charges) |
| 4 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg, |
| 5 | Erection Charges for H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg, [Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil] (Including with Transportation from Area store Guna/Gwalior/ Bhopal to working Site) |
| 6 | 11 KV(45KN) Composite Polymer Disc Insulators with Strain Hardware |
| 7 | Labour Charges for fixing of 11 KV(45KN) Composite Polymer Disc Insulators with Strain Hardware |
| 8 | Stay Set Complete Without Stay wire 16 MM (Painted) Complete |
| 9 | Erection Charges for Stay Set Complete Without Stay wire 16 MM (Painted) Complete including pit digging binding of stay wireat eye bolt, stay insulator and anchor rod & tighting on pole |
| 10 | Stay Wire 7/3.15 MM. (7/10 SWG) |
| 11 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 12 | Concreting of Structure & Foundation (1:3:6) |
| 13 | Labour Charges for Concreting of Structure & Foundation (1:3:6) |
| 14 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 15 | Labour Charges for Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 16 | Complete Jumpering of DTR |
| 17 | Red oxide paint |
| 18 | Labour Charges for Red oxide paint |
| 19 | Aluminium Paint |
| 20 | Labour Charges for Aluminium Paint |
| 21 | M.S. Nut and bolts |
| 22 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 23 | LT distribution box with 1.2 mm thick MS powder coated sheet, 200 A MCB on incoming & 6 no. 125 A HRC fuse base including 100 A HRC fuse , For 100 KVA Transformer |
| 24 | Handling & Installation for LT distribution box with 1.2 mm thick MS powder coated sheet, 200 A MCB on incoming & 6 no. 125 A HRC fuse base including 100 A HRC fuse , For 100 KVA Transformer |
| 25 | G.I. Strip 25x3 mm. |
| 26 | Labour charges for G.I. Strip 25x3 mm. for laying complete earthing including welding and back filling |
| 27 | G.I.Pipe 40 mm Dia C grade type |
| 28 | Erection Charges for G.I.Pipe 40 mm Dia C grade type Erection with Pit diging & Back Filling |
| 29 | Bentonite compound powder |
| 30 | Galvanized nut & bolt with washer |
| 31 | 11 KV Composite polymer AB Switch Horizontal Movement type |
| 32 | Labour Charges for Fixing of 11 KV Composite polymer AB Switch Horizontal Movement type with Handle & Pipe |
| 33 | 9 KV Gapless type(5 KA) polymer lightening arrestor |
| 34 | Labour Charges for Fixing of 9 KV Gapless type(5 KA) polymer lightening arrestor |
| 35 | Trans. Belting with 50x50x6 MM Angle with two cross fixing Channels |
| 36 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 37 | Labour Charges for fixing of D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 38 | Transformer mounting Channel (100X50x6 mm.) |
| 39 | Labour Charges for fixing of Transformer mounting Channel (100X50x6 mm.) |
| 40 | High precision thread through composite meter Upto 100 KVA |
| 41 | Labour Charges for Handling & Installation of High precision thread through composite meter Upto 100 KVA |
| 42 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 43 | Stringing of AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 44 | XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts |
| 45 | Stringing of XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts |
| 46 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 47 | Stringing of XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 48 | D.O.Mounting Channel Angle 65x65x6 MM |
| 49 | Labour Charges for D.O.Mounting Angle 65x65x6mm |
| 50 | DTR S/s fencing (31 feet) of 5\" barbet fencing on PCC support of 7No, 6\" Height |
| 51 | Labour Charges for DTR S/s fencing (31 feet) of 5\" barbet fencing on PCC support of 7No, 6\" Height |
| 52 | Double Gate (2No-2.5\"x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 53 | Labour Charges for Double Gate (2No-2.5\"x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 54 | GST @ 18% |
