|
| 1 | Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. |
| 2 | Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 3 | Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification). |
| 4 | Traffic signal painting of pole 1.5m height using black and white paints in alternate rings of 25cm width incl. cost of paint as specified. |
| 5 | Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. |
| 6 | Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line. |
| 7 | Additional rate for excavation of Pit for A type pole in Laterite. |
| 8 | Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc. |
| 9 | Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling. |
| 10 | Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite. |
| 11 | Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite. |
| 12 | Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally. |
| 13 | Doing straight joint on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification. |
| 14 | Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. |
| 15 | Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials. |
| 16 | Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections. |
| 17 | Additional rate for excavation of Pit for A type pole in Hard Laterite. |
| 18 | Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. |
| 19 | Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. |
| 20 | Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable). |
| 21 | Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling. |
| 22 | Laying 3 x 300 sq mm XLPE cables in trench including drawing through pipes wherever necessary. |
| 23 | Fitting one set AB switch and giving connection |
| 24 | Drilling hole of various sizes on existing Channel/Cross Arm. |
| 25 | Fitting one additional HT pin with insulator |
| 26 | Fitting one additional F top bracket |
| 27 | Drawing 11kV 3x300sqmm Aluminium XLPE UG cable through 125mm HDPE pipe |
| 28 | Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. |
| 29 | Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 30 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. |
