|
| 1 | Taking down Old unserviceable ceiling Fan and dismantling blades and removing fan and blades of any size /any height and deposited to MES Yard complete all as specified and directed. |
| 2 | S & F Ceiling Fans copper wound complete with three blades, down rod, accessories 230 V 1200 mm sweep with squirrel min air delivery 210 CFM with service value 6.00 BEE Five star rated with BLDC and Remote complete all as specified and directed. Make:- Bajaj/Havells/Usha and equivalent as specified in P.S. |
| 3 | S&F in replacement Mild steel \"Medium grade\" 15mm dia pipe down rod of required length with making split, holes, cut etc at both end of pipe as required for hanging of Ceiling fan including painting of rod with two coats of synthetic enamel white paint over one coat of primer along with U\" shape shackle clamp assembly made out of MS flat iron including checknut, bolts, screws, washer, split pin, lock nut, rubber reel complete all as specified and directed. |
| 4 | S&F Mild steel anti suicide fan rod 15 mm dia pipe with spring mechanism for load capacity 20KG for hanging ceiling fan including checknut bolts, screw, washers, split pin lock nut, rubber reel complete all as specified and directed. |
| 5 | M & L for providing drainage pipe for condensed water coming for split ACs / Window ACs Installed at First floor, Second Floor and Third Floor by Providing flexible nylon wired drain pipe 15/20/25 mm bore with connecting fitting i.e. PVC polymide clamp clip, Elbow, glands and diversion mussel of multi direction fixed suitable saddles at the distance of required lengths and size with necessary fitting as per requirement complete all as specified and as directed. |
| 6 | Supply and laying of Rigid PVC pipes \"heavy grade\" of size 25 mm, ISI Marked for Drain water from AC\"s Installed at G+2 Building suitable sizes including all fittings such as bend, elbows,tees, short pieces connection, back nuts, diminishing pieces, caps, plugs and unions etc fixed on walls, ceiling & laid on surface including necessary clamping with suitable saddles made of steel arrangement for making necessary hole/cutting on wall, testing and rectify if any leakage complete all as specified and directed. Make: SFMC/Vectus/Finolex/Supreme with ISI marked. |
| 7 | Supply and laying of CPVC (Chlorination polyvinyl Chloride) pipes of size 40 mm SDR 11 for Drain water from AC\"s Installed at G+2 Building are cut into suitable sizes including all fittings such as bend, elbows,tees, short pieces connection, back nuts, diminishing pieces, caps, plugs and unions etc laid in walls, ceiling & laid in floor including necessary clamping with suitable saddles, arrangement for making necessary hole/cutting on wall, testing and rectify if any leakage complete all as specified and directed.Make: SFMC/Vectus/Finolex /Supreme with ISI marked. |
| 8 | M & L flexible PVC drain pipe 20/25mm dia pipes of required length and necessary fittings and screw clamps of suitable size made of steel as per requirement complete all as specified and directed. |
| 9 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/borelog, including hire & running charges of all equipments, tools, plants & machineries required for the job upto 50 metre depth below ground level in all types of soil for 200 mm dia complete all as specified and directed. |
| 10 | All as per Item No. 9 above but in rocky strata including Boulders for 200 mm dia. |
| 11 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 125 mm nominal dia, conforming to IS: 12818, including required hiring and labour charges, fittings & accessories etc. complete all as specified and directed. |
| 12 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 100 mm nominal dia, conforming to IS: 12818, including required hiring and labour charges, fittings & accessories etc complete all as specified and directed. |
| 13 | M&L for packing pea gravel of size 3 to 5 mm natural shape brought direct from river bank and packingaround casing pipe to entire depth up to ground level complete all as specified and directed. (length of assembly packed only be measured for payment) |
| 14 | Development of tube well by means of high velocity compressored air with 300 PSI air compressor conforming to IS-11189-1985 para 4.2 including arrangement for equipment fitting complete all as specified and directed. |
| 15 | Supply and fix PVC Column pipe 32 mm dia having 3 mtr length of each pipe complete with necessary fixing arrangement such as suitable size of nuts, bolts, gasket, washer, etc complete all as specified and directed. |
| 16 | Supply of sodium meta hexa phosphate for disinfection of bore well complete all as specified and directed. |
| 17 | Development of tube well by means of over pumping for subsequent hours until clear discharge as per clause 9.3.2 of IS 2800 (Part-1)-1991 complete all as specified and directed |
| 18 | Providing and fixing M.S. clamp of 200 mm dia to the top of casing/ housing pipe as per IS: 2800 (Part 1), including necessary bolts & nuts of required size complete all as specified and directed. |
| 19 | Supply, installation, commissioning and testing submersible pumping set multi stage electric driven of 3 HP capacity at operating head range 10 mtr head, directly coupled with electric motor, AC Single Phase, 230 volts, 50 Hz. 2900 rpm with copper wound water proof winding complete with flange adaptor suitable for connection with 100 mm dia flanged column pipe and one set of essential tool with purchase voucher, literature of manufacture complete all as specified and directed. |
| 20 | Supplying and laying 3 core 4 Sqmm PVC insulated PVC sheathed copper conductor submersible flat cable in along with metal/ HDPE/PVC/ pipe/ column pipe/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags etc as required complete all as specified and directed. |
| 21 | Supply, installation, testing and commissioning of suitable size outdoor type pump control panel made of 14 SWG sheet steel complete with 100 amps TPN aluminium bus bars, inter connections with FRLS PVC insulated copper conductor cables, earthing and loop earthing, required heavy duty connector plates etc. and consisting of the following switch gear control and accessories, base frame made of ISMC 75 (75 mm x 40 mm x 4) 4 mm thick including powder coat painted complete as requiredIncoming: (a) 63 A, 4 pole MCCB, 25 KA rating thermal magnetic release type complete with spreader terminals etc. - 1 No. (b) 0-500 Volts, Digital voltmeter- 1 No.(c) Voltmeter selector switch 1 No.(d) LED indication lamp - 3 Nose) Control switch for indication lamp - 3 NosOutgoing: (a) DOL 5 HP starter with thermal magnetic relay and NV coil - 1 No.(b) Single phasing and Dry run preventer (current sensing type) - 1 No. b(c) suitable rating current sensor for preventer- 1 No.(d) 0-30 Amps, digital ammeter - 1 No. (e) 0-32 Amps, \"C\" series, SP MCB on din channel - 1 No. |
| 22 | Supply and laying of LT UG cable XLPE with aluminum conductor, screened bedded multistranded 1100 volts grade in galvanised steel strip or wire armoured, heavy duty electric power cables with stranded aluminium conductor, cross-sectional area of size 16 Sq mm 4 Core complete all as specified and directed. |
| 23 | M&L. for earthing complete with galvanized steel earth plate 600x600x6mm thick buried directly in ground (earth) pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip 25x4mm as earthing lead by means of bolts, nuts, check-nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, Gl pipe light grade 40mm bore for protection of Gl strip from earth electrode to and including the earth test point of galvanised Iron/steel of size 75mm x 75mm x 25mm, supplying and laying charcoal stone aggregate) chamber and mild steel angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm graded crushed stone aggregate reinforced with 8mm dia TMT BARS @ 75mm C/C both ways with mild steel handle 12mm dia, PGI funnel with wire mesh, 20 MM dia Gi pipe light grade for watering all as shown in electrical plate No.3 of MES SSR Part - 1 |
| 24 | Supply & Fix in repair PPR gate valve (Brass Insert) ISI mark head screwed both ends for 63 mm bore PPR pipe and fixedcomplete all as specified and directed. |
| 25 | Supply and fix cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore complete all as specified and directed. |
| 26 | Supplying and laying of 50 mm dia DWC HDPE pipe ISI marked (OD-50 mm & ID-41 mm nominal) along with all fittings like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete all as specified and directed. |
| 27 | S&F 15 mm dia bib tap brass or cast copper alloy with crutch handle screwed down screwed for iron pipe including taking out unserviceable tape of 15mm dia complete all as specified and directed |
| 28 | Supply and laying in 3 layer PP-R Poly propylene random copolymer concealed pipes 50 mm outer dia ,SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability forhot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches. PPR Pipes heavy duty with working pressure 6 Kg/SqCm and certified with ISI standards with all fitting such as elbow, tee union pipe clamp socket, coupling tank connector, reducer, MTA complete of suitable size laid in trenches complete with solvent with all fitting complete all as specified and directed |
| 29 | All as per Srl item No 28 but 40 mm outer dia |
| 30 | All as per Srl item No 28 but 25 mm outer dia |
