Road safety work is being carried out at 09 intersections and 19 T-junctions on the Leve Elia road under the construction block Chandauli in Chandauli district. - 09 intersections (Ch 0.700, 3.500, 2.500, 6.400, 12.100, 12.800, 15.700, 16.800, 18.800) and 19 T-junctions (Ch 0.00, 0.750, 0.850, 1.200, 2.600, 3.900, 9.100, 9.200, 10.100, 10.500, 11.100, 12.200, 12.800, 13.700,14.400, 15.500, Road safety work on 16.400, 18.100, 19.000) - Excavation in Soil by Mechanical Means . Excavation for roadway in soil using mechanical means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.Excavation for Widening. (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 2 Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 3 Construction of Embankmentwith Material obtained from Borrowpits Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 4 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 5 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 6 Providing and applying primer coat with SS grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70kg/sqm using mechanical means.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 7 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25kg per sqm on the prepared bituminous surface cleaned with mechanical broom.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 8 Providing and laying dense graded bituminous macadam(Grading-IInd)with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 9 Bituminous Concrete Grading 2 Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 10 Construction of Earthen Shoulder with Material obtained from Borrowpits Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 11 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be levelled. Uniform and free from streaks and holes. including zebra and stope line. (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 12 Providing and laying of repeated bars from thermoplastic bar marking is a softer treatment to reduce the speed. One set of bar marking (refer TM 08) comprises of 6 bars of 300 mm wide. Each strip of thermoplastic strip shall be of 5 mm high and shall be set applied across the full width of the carriageway.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 13 S/F of Pavement Maker (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) in Red colour consisting of ASA plastic housing fitted with tightly adherent ploting compound. The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light I/C all taxes.(Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 14 Traffic Signs-Maximum Speed Limit Providing and fixing of retro-reflectorised cautionary mandatory and informatory signe as per IRC 67 made of high inlensity grade sheeting vide clause 801.3 fixed cover aluminium shifting 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm fimly fixed to the ground by means of properly dsigned foundation with M-15 grade cement cone 45cm x45 cm x60 cm, 60 cm below ground level as per approved drawing. 60 Cm Circular. (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 15 Providing andfixing rectro reflectorised mandatorysignas per IRC:67 mod of high intensity grade sheeting vide 801.3 fixing cover alluminium shing, 1.50 mm thick supported on a mild steel angle iron 75mmx75mmx6 mmfirmly fixed to the ground by means of proparly designed foundation with M-15 grade cement con 45 cmx45cmx40cm cm below ground level as per approved drawing. (60 Cm Equlateral Tringale) (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) 16 Providing andfixing rectro reflectorised cautionarysign as per IRC:67 mod of high intensity grade sheeting vide 801.3 fixing cover alluminium shing, 1.50 mm thick supported on a mild steel angle iron 75mmx75mmx6 mmfirmly fixed to the ground by means of proparly designed foundation with M-15 grade cement con 45 cmx45cmx40cm cm below ground level as per approved drawing.(60 Cm Equlateral Tringale) (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)
