Tender For Repair And Maintenance Of Bangana Shantla Road
Tender Value
37.58 Lakhs
Estimated cost
Bid Submission
21 Mar 2025
0 days left
EMD
63900
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bangana → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Bangana Shantla Road Sh P/L 30Mm Thick Bituminous Concrete In Km. 4/000 To 6/000) Under O.F.C. Head
BOQ
| Sl. No. | Item Description |
| 1 | Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat at the rate of 0.30Kg ( zero decimal three zero kilogramme) per square metre, 20 mm( twenty millimeter) compacted thickness, composed of crushed stone aggregate 13.2mm ( thirteen decimal two millimetre) to 5.6mm ( five decimal sixmillimetre aggregate at rate of 0.27 cum ( zero point two seven cubic metres), mixed with Bitumen VG-30 at the rate 1.46 Kg (one pointfour six kilograme ) persquare metres of road surface to required line grade and level to serve as wearing course on a previously prepared base, including mixing andheating binder and aggregate in Hot Mix Plant 30/40 ( Thirty/ Forty) Tonne per hour capcity, transporting mixed material with tipper and laying mannualy to the required grade and camberand rolling with a three Wheel 80-100 ( Eighty-hundred) KNstatic road roller, finished to required level and seal coat seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B as per technical specification clause 510 using BITUMEN VG - 10 at the rate of0.68 kg ( zero point sixeight kilogram) premixedwith 0.006( zero point zero-zero six) cubic metre of fine aggregate perSqm. (square metre) heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8-10 ( eight to ten) tonne capacity specificationClause 1904.2,503 and 508.1, including carriage of materials within all leads and liftsand other incidental . The rates areinclusive ofoctroi,royality, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 2 | Providing and applyingtack coat with bitumen emulsion(RS-I) using emulsion distributor at the rate of0.275 kg.per sqm (Zero point two hundred seventy fivekilogram) per square metre.on the preparedgranular surfaces treated with primer and cleaned with Hydraulic broom as per technical specification .clause 503 includingcarriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by theGovernment.. |
| 3 | Providing and laying 30mm thick Bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.5 per cent of mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 including carriage of materials in allleads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge.The rates areinclusive ofoctroi,royality, Malkana, toll tax, sale tax, GST orother taxesimposed by the Government.The Hot Mix Plant should be situated with in the distance of 30 km (Thirty Kilometer) from wotk site. |
| 4 | Providing and laying of hot applied thermoplastic compound as per MORTH specification 803 & IRC: 34, 2.5mm two point five milimeter) thick including reflectorising glass beads @ 250 gms per sqm (two hundred fifty gms per sqm), thickness of 2.5mm (Two point five milimeter) is exclusive of surface applied glass beads as per IRC : 35.The finished surface to be level, uniform and free from steaks and holes items as per drawing and technical specifications and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Mar 15, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 21, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender