|
| 1 | providing & laying of hot applied thermoplastic compound 2.5 mm thick including rectrorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is inclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free form streaks and holes. Rates to be inclusive of all taxes, royalty, VAT etc and all T&P / machine material and labour required for proper completion of work. (MORT & H No 803) |
| 2 | Marking of Thermoplastic 300 mm size and 15mm hieght at 1000 mm apart(one set is of 6 strips) 15 mm height is achieved through six applications thermoplastic ,aplied at an interval not less than one hours after the previous layer gets solidaified.Alternatively ,made of mastic asphalt or any equivalent material with would provide 15mm height. Repated Bar Making ( For Speed Control) |
| 3 | Providinglaying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant,laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat. (For Rumble Strip Depth 0.025 mm)(Tack coat +P.C.+Seal coat) |
| 4 | Providing and applying tack coat withVG-10 using Bitumen distributor at the rate of 0.30 kg per sqm on the preparedsurface cleaned with hydraulic broom ..(Speed Table) |
| 5 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects..(Speed Table) |
| 6 | Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Speed Table) |
| 7 | Providing and fixing of retro refectories cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminum shting, 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement conc. 45cm x 45cm x 60cm, 60 cm below ground level as per approved drawing)( size 60x45 cm rectangular ) |
| 8 | Providing and fixing of retro refectories cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminum shting, 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement conc. 45cm x 45cm x 60cm, 60 cm below ground level as per approved drawing)( size 90cm equilaterial Triangle) |
| 9 | S/f of Pavement Maker (Cat eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly adherent plotting compound.The housing shall contain prismatic two glass covered prismatic reflective face to reflect. |
| 10 | S/F reflective tree plate having size 15cmx15cm,consisting type sheeting over aluminum shting, 1.5mm thick ,including labour ,material T&P etc for proper completion df work (Tree Plate) |
| 11 | Retro refectories traffic sign board as per IRC-67-2012 providing and fixing of retro refectories Traffic sign board as per IRC-67-2012 cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminum shting, 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x 5mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement conc. 45cm x 45cm x 60cm, 60 cm below ground level as per approved drawing.The Retroreflective sheeting shall be tested for three year out door weathering test in Indian condition as per IRC-67-2012 and proof of the same inform ofgoverment report(Size 90 cm High octagonal ) (STOP BOARD). |
