Tender For The Work Of Release New Connection/Lt/11 Kv Line Erection/Shifting Of 33 Kv Line In Deposit Scheme On Semi Turnkey Basis In The Edd-Ii, Etah Under The Jurisdiction Of Edc Etah - Supply Of Material By The Contractor As Per Relevant Iss :- 2 St, etah-Uttar Pradesh

Tender For The work of release new connection/LT/11 KV line erection/shifting of 33 KV line in deposit scheme on Semi Turnkey basis in the EDD-II, Etah under the jurisdiction of EDC Etah - Supply of Material by the Contractor as per relevant ISS :- 2 Stone Pad 3 Earthing Rod Complete 2540x20 mm 4 Stay Clamp 5 Danger Board with clamp and N&B 6 Barbed wire 7 Number Plate 8 Stay Set 16x1800 9 Stay Set Complete 10 Earth wire clamp with N&B 11 DP Clamp 12 PG Clamp 13 Cabel Jointing Kit 11 KV 3x 70 sqmm OD 14 Cabel Jointing Kit 11 KV 3x 70 sqmm ID 15 Clamp for LT Tee-off Channel with N&B 16 MS Top Channel 125x65x6x2240 mm 17 T-Channel 125x65x6x1300 mm with clamp 18 Nut Bolt & Washer 19 F Bracket Clamp 20 Dead And Clamp 21 Suspension Clamp 22 I Hook with Clamp 23 AL. Tape (0.77x6.4 mm) 24 AL. Lug Long Barrel, off size 25 4 Core LT MCB Box 26 Guarding Angel Clamp 27 MS Angle Iron 65x65x6x4300 mm Bracing with for clamp 28 Al. Paint 29 Red Oxide Paint 30 Holding Clamp For T/F, Top & Dropper and Dropper Channel with N&B 31 Distribution Box Clamp 32 Distribution Box 1 Phase 33 Distribution Box 3 Phase 34 Piercing Connector 35 Copper L-Piece 62x225x12 sqmm 36 Copper L-Piece 50x225x10 sqmm 37 LT Clamp with N&B 38 11 KV Fuse Set 39 11 KV Cross Arm Clamp 40 LT Incoming Panel with Metering Equipment 41 G.I. Pipe 6 Dia 42 G.I. Wire 6 SWG 43 Safe Carriage of following material from Electricity Store Center Etah to pit site of work from the Kaccha & Pakka Road including loading & unloading at the respective ends including the cost of arrangement of labour, T&P etc. which required for poper completion of work (Distance 0 to 60 kms.) 44 T/F Base Angle with Clamp 65x65x6x2028 mm 45 Stay wire 7/10 SWG 46 GI wire 8 SWG 47 MS Top Channel 100x50x5x2240 mm 48 Guarding Angel with Clamp, Nut & Bolt 50x50x6x1600 mm 49 M.S. Dropper Channel 100x50x5x2028 mm 50 11 KV TPMO with Polymer Insulator 51 11 KV Cross Arm V Type 52 11 KV Pin Insulator with Pin, N&B 53 33 KV Pin Insulator with Pin, N&B 54 11 KV Disc Insulator 55 11 KV Disc fitting 56 ABC 3x95 (PH)+1x70+1x16 57 LT ABC 3x120+1x70+1x16 58 AB Cable 1x16+1x25 sq mm 59 AB Cable 3x50+1x35+1x16 sq. mm 60 Cable HT XLPE 11 KV 3x120 sq. mm 61 11 KV XLPE Cable H.T. 3x70 sq. mm 62 PVC Al. Cable 3x70 sq. mm 63 LT AL. XLPE Cable 1x400 sq. mm 64 33 KV XLPE Cable 3x300 sq. mm 65 Cable Jointing Kit 11 KV 3x 120 sq. mm OD/ID 66 Cable Jointing Kit 33 KV 3x 300 sq. mm OD 67 LT XLPE Cable AL1x240 sq. mm 68 25 KVA 11/0.4 KV T/F 69 63 KVA 11/0.4 KV T/F 70 100 KVA 11/0.4 KV T/F 71 10 KVA 11/0.25 KV T/F 72 250 KVA 11/0.4 KV T/F 73 PCC Pole 8.5 mtr. Long 74 PCC Pole 9 mtr. Long 75 ST Pole SP-55 11 mtr. Long 76 G.I. Wire 4mm/8 SWG 77 G.I. Wire 10 SWG 78 ACSR Dog conductor 79 ACSR Weasel conductor 80 Modem 81 11 KV CT/PT Pole mounting metering unit (CTR10/5A) 82 3 Ph.-4w Static LT TVM with Metering Cubical 83 Pilfer proof 11 KV CTR 10/5A 84 Cable LT PVC 4x16 sq mm 85 Al. armoud cable 3.5x70 sq. mm 86 Cable Al. conductor 2x4 sq. mm armoud 87 Erection of Material 88 Erection of single support including complete H.T/L.T fittings PCC Pole 8.5 Mtrincluding Grouting & Muffing of pole per DVVNL/RESPO norms. 89 Erection of single support including complete H.T/L.T fittings PCC Pole 9 Mtrincluding Grouting & Muffing of pole per DVVNL/RESPO norms. 90 Erection of Single Support including complete H.T/L.T fittings etc. S.T. Pole 11 Mtr SP-55 including Grouting & Muffing of pole per DVVNL/RESPO norms. 91 Erection of Double Support including complete H.T/L.T fittings etc. S.T. Pole 11 Mtr SP-55 including Grouting & Muffing of pole per DVVNL/RESPO norms. 92 Erection of Tri Support including complete H.T/L.T fittings etc. S.T. Pole 11 Mtr SP-55 including Grouting & Muffing of pole per DVVNL/RESPO norms. 93 Erection of Double support including complete H.T/L.T fittings PCC Pole 8.5 Mtrincluding Grouting & Muffing of pole per DVVNL/RESPO norms. 94 Installation of 11 KV TPMO with polymar Insulator 95 Erection of stay set complete including the work of nuzzling etc. 96 Erection of Earthing rod complete 97 Laying sagging stringing, binding and jumpering ACSR Weasel conductor 98 Laying sagging stringing, binding and jumpering ACSR Dog conductor 99 Painting of Pole by AL. Paint & Rad Oxide Paint 100 Laying & Termination of AB Cable 3x95 (PH) +1x70+1x16 101 Laying & Termination of LT AB Cable 3x120+1x70+1x16 sqmm. 102 Laying & Termination of AB Cable 1x16+1x25 sqmm. 103 Laying & Termination of AB Cable 3x50+1x35+1x16 sqmm. 104 Laying and Termination of 11 KV Cable HT XLPE 3x120 sq. mm 105 Laying and Termination of 11 KV Cable HT XLPE 3x70 sq. mm 106 Laying and Termination of PVC AL. Cable 3x70 sq. mm 107 Laying and Termination of LT AL. XLPE Cable 1x400 sq. mm 108 Laying and Termination of LT PVC Cable 4x16 sq. mm 109 Laying and Termination of AL. Armoured Cable 3.5x70 sq. mm 110 Laying and Termination of Cable AL. Conductor 2x4 sq. mm Armoured 111 Laying and Termination of LT AL. XLPE Cable 1x240 sq. mm 112 Laying and Termination of 33 KV XLPE Cable 3x300 sq. mm 113 Laying and Termination of GI wire 4 mm/8 SWG 114 Laying and Termination of GI wire 6 SWG/10 SWG 115 Installation of Modem 116 Erection/Fixing of Copper L-Piece 50x225x10 sq. mm & 62x225x10 sq. mm 117 Laying and Termination of Stay wire 7/10 SWG 118 Installation of 11 KV Fuse Set 119 Installation of Distribution Box 1 Phase/3 Phase 120 Installation of Danger Board 121 Installation Barbed wire including jumper 122 Installation of 10 KVAT/F 11/0.4 KV New at sitein all respect 123 Installation of 25 KVAT/F 11/0.4 KV New at sitein all respect 124 Installation of 63 KVAT/F 11/0.4 KV New at sitein all respect 125 Installation of 100 KVAT/F 11/0.4 KV New at sitein all respect 126 Installation of 250 KVAT/F 11/0.4 KV New at sitein all respect 127 Installation of 11 KV Cable Jointing Kit I/D & O/D 3x70 & 3x120 sq. mm 128 Installation of 33 KV Cable Jointing Kit O/D 3x300 sq. mm 129 Installation of T/F Base Angle with Clamp 65x65x6x2028 mm 130 Installation of Guarding Angel with Clamp, Nut & Bolt 50x50x6x1600 mm 131 Installation of 11 KV CT/PT Pole Mounting Metering Unit CTR 10/5A 132 Installation of 4 core LT MCB Box 133 Installation of 3 Phase-4W Static LT TVM with Metering Cubical 134 Installation of Pilfer Proof 11 KV CTR 10/5A 135 Construction of 250 KVA T/F plinth for size 2x2x1.5 M with the help of first class brick and masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely as per norms with RCC top 1:2:4 cement, sand coarse and stone grit with MS Bar and MS channel for resting transformer wheel (100x50x6mm) and plaster. All material shall be provided by the contractor. 136 Providing and erection of welded wire mesh fencing around transformer plinth with MS Angle of size 40x40x6 mm length and 1.20 mtrs height. Such panels shall be supported on MS angle from of size 40x40x6 mm having 04 nos corner supports of height 1.65 mtrs including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc for lockingarrangement as per drawing and specifications. The fencing will be painted in the green colour synthetic enamel paint after painting with one coat of red oxide primer. The rates should be inclusive of all materials required for completion of above work. (Length of each fencing approx. 11 mtrs) with T& P labour etc. All material shall be provided by the contractor. 137 Pipe earthingup to water level of 250 KVA medium Power Transformers (Body & Nutral).All material shall be provided by the contractor. 138 Charges for Dismantling Work:- Work includes dismantling from site and cartage of same materails from site/location to central store as per instruction of JE/SDO/EE concerned. 139 Old Rail Pole 140 Iron Scrap (Cross Arm with Clamp & Pin) 141 Dog Condctor Scrap 142 11/0.4 KV 63 KVA T/F old

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	18-03-2025	Date_500	Date	20-03-2025

INR 3540 /-

INR 30000.0 /-

INR 30 Lakhs /-