Tender For Construction And Routine Maintenance Of Road From 1. Kk Road To East Jalai L 3.786 Km, Package No Tr 03 104, L 028 Under Gournagar Block. Dnit No 10 Eo Pmgsy I Balance Work Trrda 2024 25
Tender Value
8.24 Crore
Estimated cost
Bid Submission
01 Apr 2025
0 days left
EMD
16.50 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gournagar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Routine Maintenance Of Road From 1. Kk Road To East Jalai L 3.786 Km, Package No Tr 03 104, L 028 Under Gournagar Block. Dnit No 10 Eo Pmgsy I Balance Work Trrda 2024 25 Pmgsy-I Works
BOQ
| Sl. No. | Item Description |
| 1 | KK road to East Jalai(L=3.786 km, Package No: TR-03-104, L 028, under Gournagar Block |
| 2 | Clearing and Grubbing Road Land |
| 3 | Clearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specificationclause 201. |
| 4 | By Manual Means |
| 5 | In area of non-thorny jungle |
| 6 | Setting Out |
| 7 | Setting Out( As per drawing enclosed) ( using PCC with jhama brick aggregate ) |
| 8 | (ii) Excavation in Soil with Dozer with lead upto 100 m. |
| 9 | Excavation for roadway in soil by mechanical means with Dozer including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3 |
| 10 | (iii) Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m |
| 11 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 12 | Construction of Embankment withMaterial Obtained from Roadway Cutting |
| 13 | Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 |
| 14 | A) For spreading beyond 100 m |
| 15 | B) For spreading within 100 m |
| 16 | Construction of Embankment with Material Obtained from Borrow Pits |
| 17 | Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 |
| 18 | Construction of Subgrade and Earthen Shoulders |
| 19 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits or from roadway cuuting with all lifts and leads, transporting to site , spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1.A. With approved materials obtained from borrow pits |
| 20 | Granular Sub-base with Well Graded Material ( Table 400.1 ) using Jhama Brick Aggregate |
| 21 | By mix in place method |
| 22 | Construction of granular sub-base by providing well graded material ( Jhama Brick Aggregate , as per Table 400.1), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 23 | For Grading - II Material ( Jhama brick aggregate ) |
| 24 | WBM Grading 2 |
| 25 | Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kNin stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. |
| 26 | By mechanical means |
| 27 | WBM Grading 3 |
| 28 | Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kNin stages to proper grade and camber, applying and brooming,binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 29 | By Mechanical Means |
| 30 | Prime Coat |
| 31 | Low porosity |
| 32 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 33 | Tack Coat |
| 34 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 |
| 35 | 20 mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/ modified bitumen) Binder |
| 36 | Providing , laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per Technical Specification Clause 508 |
| 37 | Case -II : By Mechanical Means |
| 38 | Bitumen VG-30 |
| 39 | Seal Coat |
| 40 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510 |
| 41 | By Manual Means |
| 42 | Case - IV : Type D (with fine sand) |
| 43 | Bitumen S-65 |
| 44 | Construction of toe walls for protection of slopes as per Drawing and technical specifications Clause 1302.5 |
| 45 | III. Cement concrete grade M 10 in case of concrete block pitching |
| 46 | i) Nominal Mix 1:3:6 |
| 47 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. |
| 48 | Ordinary Soil |
| 49 | Upto 3 m depth |
| 50 | Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200 |
| 51 | Sand filling |
| 52 | Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203. |
| 53 | P.C.C grade M 10( using jhama brick aggregate ) |
| 54 | Nominal mix 1:3:6 |
| 55 | Plain/reinforced cement concrete in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. |
| 56 | IV.P.C.C grade M-20 (1:2:4) (Hand mix) |
| 57 | i) upto 5 m height |
| 58 | Brick masorny work in cement mortar in foundation completed excluding pointing & plastering as per drawing & MoRD technical specifications Clauses 600, 1202 & 1203 |
| 59 | Brick masonry in 1:4 cement mortar |
| 60 | Plastering with cement mortar (1:4) 12 mm thick on brickwork / C.C. work including a finishing coat of neat cement punning with 2.20 Kg of cement per sqm in substructure as per technical specification Clauses 613.4 & 1204. |
| 61 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. |
| 62 | Ordinary Soil(i) Upto 3 m depth |
| 63 | Filling in foundation trenches as per drawing & technical specification Clause 305.3.9 |
| 64 | i) Sand filling |
| 65 | Plain/reinforced cement concrete in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. |
| 66 | i) P.C.C grade M 15 (1:2.5:5 Nominal mix) |
| 67 | VI.RCC grade M-25 |
| 68 | Supplying, fitting & placing HYSD bar |
| 69 | Supplying, fitting & placing HYSD bar reinforcement (Fe415) in substructure completed as per drawings & technical specificationClauses 1002, 1005, 1010 and 1202 |
| 70 | Providing & laying reinforced cement concretein superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5 |
| 71 | II. RCC grade M 251) For height upto 5 m |
| 72 | Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202 |
| 73 | Construction of Wing wall/Return wall |
| 74 | Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 |
| 75 | II) 1:4 Cement mortar |
| 76 | Plastering with cement mortar (1:4) 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 |
| 77 | Surface Drains |
| 78 | Construction of unlined surface drains of average cross-sectional area 0.4 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. |
| 79 | Surface Drains in Ordinary Soil |
| 80 | Mechanical Means |
| 81 | Road side Pucca Drains |
| 82 | Construction of road side pucca drain with M10 ( 1:3:6 with jhama brick aggregate)to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site. |
| 83 | Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mm |
| 84 | I.In Ordinary Soil |
| 85 | Kilometre Stone ( with RCC M15 grade using jhama brick aggregate ) |
| 86 | Reinforced cement concrete M15 grade ( using jhama brick aggregate ) kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703. |
| 87 | Ordinary Kilometre Stone(precast) |
| 88 | 200 m Stone(precast) |
| 89 | Construction of RCC guide posts of 250 mm dia and total 600 mm long,(300 mm below GL ) M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1401.6 |
| 90 | A. In ordinary soil |
| 91 | Providing and Fixing \"Logo\" of PMGSY Project |
| 92 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25 mm x 25 mm x 5 mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 450 mm x 600 mm , 600 mm below ground level. The top most diamond plate will be welded to middle plate by 47 mm x 47 mmof 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 93 | Providing and Fixing \"Citizens\" Information Board\" of PMGSY / Bharat Nirman Project |
| 94 | Providing and fixing of typical Citizens\" Information board with Logo as per MORD specifications and drawing. Two MS Plates of 2.0 mm thick, duly welded with MS flat iron 50 mm x 5 mm size on back on edges. The flat iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 76.1 mm OD (horizontal) and 2 Nos. 76.1 mm OD (Vertical) steel tube posts { as per IS : 1161 - 1979, Medium Class } duly embedded in cement concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm , 750 mm below ground level.All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube and flats will be painted with primer and two coats of epoxy paint as per drawing and specification Clause 1701 and Annexure 1700.1(B) Board - \"B\" |
| 95 | Retro-reflectorised Traffic Signs |
| 96 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete (using jhama brick aggregate ) 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawings and Technical Specification Clause 801 |
| 97 | 600mm equilateral triangle aluminium sheating |
| 98 | 600mm Dia circular aluminium sheating. |
| 99 | 800×600 mm rectangular aluminium sheeting |
| 100 | Maintenance |
| 101 | Total for 1st year maintenance (including 18% GST) |
| 102 | Total for 2nd year maintenance (including 18% GST) |
| 103 | Total for 3rd year maintenance (including 18% GST) |
| 104 | Total for 4th year maintenance (including 18% GST) |
| 105 | Total for 5th year maintenance (including 18% GST) |
| 106 | ● The upgradtion cost is inclusive of GST @ 18% and ● Maintenance amount is pre-specified by the authority as mentioned above. |
AI Tender Summary
Tender Timeline
Mar 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 01, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 01, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender