Tender For Road Sefety Work On Tundla Awagarh Etha Road Sh 31 - Tack Coat For Rumble StripsProviding and applying tack coat with bitumen VG-10 pressure distributor @ 0.30 kg/sqm on the prepared bitumen granular surface cleaned with mechanical broom as per MoRTH specification 5th revision clause No. 503including cost of all materials, T&P, labour, cess, cartage for proper completion of work as per direction of Engineer-in-Charges3including cost of all materials, T&P, labour, cess, cartage for proper completion of work as per direction of Engineer-in-Charges 2 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. 3 Bituminous Concrete Work For Rumble StripsProviding and laying bituminous concrete with 100-120TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification 5th revision clause No. 509 complete in all respectsincluding cost of all materials, T&P, labour, cess, cartage for proper completion of work as per direction of Engineer-in-Charges. 4 Zebra Crossing:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.(As per MORTH 803.4 complete in all respectsincluding cost of all materials, T&P, labour, cess, cartage for proper completion of work as per direction of Engineer-in-Charges.)ZEBRA CROSSING as per Annexure A, Table:A.4: BM02 of IRC :35-2015 5 Repeated Bar Marking:Providing and laying of Repeated Bar marking with hot applied thermoplastic compound 5.00 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.(As per MORTH S.803.4 complete in all respectsincluding cost of all materials, T&P, labour, cess, cartage for proper completion of work as per direction of Engineer-in-Charges.)REPEATED BARS as per Clause 11.2.1, Table:11.10:of IRC :35-2015 6 Supply and fixing of Reflective Raised Pavement Markers (RRPM/cats eye) of approved quality of spring poly strength with curve corner technology made of USA prismatic lens fix with bituminous adhesive as per MORT&H specification, at an interval of6.0 meter.Inculiding Cess 7 TRAFFIC SIGNS Speed Breaker/ Rumble Strip (90 cm equilateral triangle):Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (90 cm equilateral triangle) as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium sheeting 1.5 mm thick, supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete of size 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (as per IRC:67-2012 clause 14.60) (As per MORT&H Spec.no. 801.1complete in all respectsincluding cost of all materials, T&P, labour, cess, cartage for proper completion of work as per direction of Engineer-in-Charges) 8 TRAFFIC SIGNS - GIVE WAY Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign boards (Size 90 cm height Octagonal) as per IRC:67 mad of high intensity grade sheeting grade-type-XI vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing and E-in-c Circular N0.62 issude wide letter no. 879/MT/60MT/2019 dt. 16.01.2019 9 TRAFFIC SIGNS - Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign boards Size 45 cm x 60 cm rectangular as per IRC:67 mad of high intensity grade sheeting grade-type-XI vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Before Intersection & T. Junction on Main Road) and E-in-c Circular N0.62 issude wide letter no. 879/MT/60MT/2019 dt. 16.01.2019 10 TRAFFIC SIGNS -HAZARD MARKER Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign Size 45 cm x 60 cm rectangular as per IRC:67 mad of high intensity grade sheeting grade-type-XI vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing and E-in-c Circular N0.62 issude wide letter no. 879/MT/60MT/2019 dt. 16.01.2019 11 Supplying and installation of delinators (road way indicators, hazard markers, object marker) 80-10cm, high above ground level, painted black and white in 15cm, wide strips, fitted with 80x100 mm rectangular or 75 dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing.andSOR SI NO. CHAPTER NO-17 SN-1 12 Providing and Fixing of retro-reflective tree plates on the tree of size 10cm×10cm 13 Crash Barrier:Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per As per MORT&H Spec.no. 811complete in all respectsincluding cost of all materials, T&P, labour, cess, cartage for proper completion of work as per direction of Engineer-in-Charges Including Cess 14 Linear Delineator system (LDS)Supplying and installation of Lineardelinatorssystem (lds) panels made of micro prismaticRetro Reflective Sheeting type XIduly laminated on thin aluminium foil to a unique corrugated shape to provide Retro Reflection across wide range of observations and external angles. Eatch LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing concrete / brick work with 16 nos. fastner / screw. abaditundla divider 15 Bollard (Single Side)Supply & fixing of Bollard made (single Side) out of 2mm thick aluminium sheet face to be covered with high intensity prismatic grade type IV sheeting. Legends, letters, numerals and borders etc. Should be as per MoRTH specification No. 801.3.7. Welded poly shaped to make it monolithic pillar size 1200 mm high bollard is having a frame 900x600 mm and dia for fixation made out of 35x35x5 mm angle iron and from side is fully cover. (Size of foundation 0.45x0.45x0.60m)abaditundla divider 16 Class-150 (Non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work. (Repair of old damaged median/divider). 17 12 mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm in girth and finished even and smooth (Repair of old damaged surface). 18 Finishing walls with putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. Required for proper completion of work. 19 Finishing walls with water proofing cement paint of approved make such as super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on under coated wall surface (One Coat) over and including one coat white cement primer to give and even shade after thoroughly after brushing the surface (DSR SI no. 660) + add (DSR SI no. 661) 20 Fiexible Median Marker As Per IRC 79:20:19:Flexible Median Marker (FMM) should be used for improving median visibillty during dark hours. Use of Median Marker provides safety against collision happening with medians during night time or severe weather, Flexible Median Markers shall be provided with fluorescent yellow colour retro- feflective sheeting Type XI as per IRC:67 Flexible Median Marker shall be of tough, high impact resistant injection-molded, thermoplastic body with property of flexiblity to provide high durabilty and U shape structure having rebound/bounce back property, the sheeting shall be of type XI conforming to IRC:67 and it should be on both the faces whereby providing maximum reflectivity at I anger distances with adequate durabllity the logo of the manufacturer shall be embossed on either side of the body durring the injection molding process, FMM shall be fixed by a combination bf epoxy adhesive and grouthing/drilling on concrete medians or property constructed solid medians, Height THe marker height shall be a minimum of 180 mm width 120 mm & Body Thickness 6.5 mm the shanks shall not be less than 20 mm and depth shall not be less than 30 mm Reflective Area. Shall not be less than 90 cm square Proof of the same Report shall be upioaded which quoting tender The body of FMM shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg conforming 40 ASTM D256 adhesion between the body and outer casing body of FMM shall with stand 50 kg Tensile loads conforming to ASTM D638 method. The rate shall include all materials. labour, T&P transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. 21 Note - GST Extra paid as per Rules.2- All rate are included 1% Labour cess that shall be deduct at the time of payment
