Tender For Provn Of Over Head Shed In Bld No P-59 Offrs Mess Guest Room At Ncc Dte (Ap And T) And Repair Of Convey Vehicle Marshaling Area At 554 Asc Bn Under Ge (South) Secunderabad
Tender Value
48.92 Lakhs
Estimated cost
Bid Submission
02 Apr 2025
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
secunderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Over Head Shed In Bld No P-59 Offrs Mess Guest Room At Ncc Dte (Ap And T) And Repair Of Convey Vehicle Marshaling Area At 554 Asc Bn Under Ge (South) Secunderabad
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exe 50 complete all as specified and as directed |
| 2 | M&L for PCC 1:4:8 type B2 (Using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed |
| 3 | Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 6 | S & F Steel work in tubular trusses, parlin, rafters etc including special shaped washer etc including gusset plate, nut & bolts complete all as specited and as directed. |
| 7 | M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 8 | Surface excavation hard/dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed. |
| 9 | Rolling and consolidating formation surfaces in cutting and hardcore surface with Power roller 8 to 12 tonne on complete all as specified and as directed. |
| 10 | M&L for Hardcore with broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 11 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in 100mm thick as in sub base complete all as specified and as directed. |
| 12 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 13 | M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate ) as in edging and chamferingetc complete all as specified and directed. |
| 14 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 15 | M&L for applying two coats reflecting paint with 50 microns thick over one coat of primer over concrete surface or stone walls or iron and the and the application in dry area 5 degree to 50 degree celcius and flash point not less than 92 degree celcius. Retro reflective 70 to 120 Cdlx/Mtr will be measured with portable retro reflective measuring gun complete all as specified and as directed.(Note : Colour will be aprroved by Engr-in-Charge and GE) |
| 16 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Mar 12, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 02, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 10, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender