|
| 1 | M&L for framed work as in doors or gates of angle made out of FE 410-W Gde E-250 quality -A or other section with gusset plates, rails, fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, including dismantling of existing frame work complete all as specified and directed. |
| 2 | Taking down of existing panel cover and refixed including fabrication ofexisting panel cover with new hing, nut and bolt with and including applying two coat of hi-gloss synthetic enamel paint complete all as specified and directed. |
| 3 | S&F GI wire 4mm dia (8 SWG) stretching and fixing on pole for continious earth conductor, Guard wire 3.2 mm (10 SWG) for cradle (Hexagonal/rectangular) including binding wire, including dismantling existing GI wire complete all as specified and directed. |
| 4 | M&L for cutting of vegetation surrounding transformer, two poles, four pole structure at various sub station/ E&M installation and remove to a distance not exc 50 mtr complete all as specified and directed. |
| 5 | S&F of 40 mmdia pipe galvanised iron light grade ( ISI marked) with all fittings laid in trenches or on pole, crossing of road, fixed on wall for protection of cables, including taking up and down existing GI pipe with fitting complete all as specified and directed. |
| 6 | S&F of 50 mmdia pipe galvanised iron light grade ( ISI marked) with all fittings laid in trenches or on pole, crossing of road, fixed on wall for protection of cables, including taking up and down existing GI pipe with fitting complete all as specified and directed. |
| 7 | S&F of 80 mmdia pipe galvanised iron light grade ( ISI marked) with all fittings laid in trenches or on pole, crossing of road, fixed on wall for protection of cables, including taking up and down existing GI pipe with fitting complete all as specified and directed. |
| 8 | M & L forplain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation of stay assy/ pole etc, including form workcomplete in all as specified and directed |
| 9 | M & L forplain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate for coping/plinth of poles, including necessary form work finished even & smooth without using extra cement all as specified and directed |
| 10 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core, including taking up and down existing unserviceable cable and removing from site complete all as specified and directed. |
| 11 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core, including taking up and down existing unserviceable cable and removing from site complete all as specified and directed. |
| 12 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core, including taking up and down existing unserviceable cable and removing from site complete all as specified and directed. |
| 13 | Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sqmm 2 core, including taking up and down existing unserviceable cable and removing from site complete all as specified and directed. |
| 14 | Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5 metre in depth and getting out complete all as specified and directed. |
| 15 | M&L for local river sand coushioning with dry and clean sand over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable and filling the sand in cable duct of inside the sub station building complete all as directed.Note:- Punned thickness shall be measured for payment purpose. |
| 16 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 17 | Returning filling in with excavated soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 18 | Removing excavated materials (soil) not exceeding 50metre and depositing where directedat a level not exceeding 1.5 meter above starting point complete all as specified and directed. |
| 19 | Taking down LT UG cable carefully without damage, including taking out carefully without damage old bricks, cable covers, GI pipe of any sizefor reuse from trenches and Re-laying/re-routing of LTUG cable PVC insulated , beddedarmoured heavy duty electric cable 1100 volts grade with aluminium conductor of any size laid in trenches or fixed on wall/floor/poles complete all as specified and directed.Note:- (i) Bricks, cable cover and GI pipe retrieved from above item shall be re-used in relaying/re-routing of LT cable.(ii) Excavation shall only be allowed manually.(iii) Only sand cushioning shall be allowed seperatly under respective item. |
| 20 | S&F in renewal of HRC fuse 6 to 16 Amps as per existing make and specification to fixed in HT panel complete all as specified and directed. |
| 21 | S&F in renewal of battery 12V 7 AH maintenance free sealed lead acid battery for portable OT light complete all as specified and directed |
| 22 | S&F in renewal of battery 12V 26 AH maintenance free sealed lead acid battery for 5 KVA online UPS complete all as specified and directed |
| 23 | S&F in renewal of battery 12V 42 AH maintenance free sealed lead acid battery for portable OT light complete all as specified and directed |
| 24 | S&F in renewal of battery 12V 100 AH maintenance free sealed lead acid battery for UPS complete all as specified and directed |
| 25 | M&L for checking, cleaning and making functional in all respect of online UPS of any capacity including cleaning inside and outside complete all as specified and directed. |
| 26 | S&F in renewal of IGBT suitable for 5KVA online UPS as per existing make and specification complete all as specified and directed. |
| 27 | S&F in renewal of SMPS suitable for 5KVA online UPS as per existing make and specification complete all as specified and directed. |
| 28 | S&F in renewal of Control card suitable for 5KVA online UPS as per existing make and specification complete all as specified and directed. |
| 29 | S&F in renewal of driver card suitable for 5KVA online UPS as per existing make and specification complete all as specified and directed. |
| 30 | S&F in renewal of EP ROM card card suitable for 5KVA online UPS as per existing make and specification complete all as specified and directed. |
| 31 | S&F in renewal of transformer OP sense suitable for 5KVA online UPS as per existing make and specification complete all as specified and directed. |
| 32 | S&F in renewal of capacitor suitable for 5KVA online UPS as per existing make and specification complete all as specified and directed. |
| 33 | M&L for checking of DC battery chargerof any size and any capacity and making functional using minimum requirement of material all as per site requirement complete all as specified and directed.(Note : Quoted rates shall be deemed to include opening of bettery charger accessories and taking the defective items to the approved workshop & made functional). |
| 34 | M&L for checking of earth resistance of earthing pit at different location as indicated by Engr-in-Charge with the help of earth resistence testing kit including making proper record of test report and getting signature of user and Authoritries complete all as specifed and directed. |
| 35 | M&L for checking of earth resistance of lightning conductor installed over various buildings, including checking of air termination rods, earth continuity GI/aluminium strip and rectifying minor defects complete all as specifed and directed |
| 36 | M&L for PVC/Porcelain saddle used for fixing of GI/Aluminium strip on wall/roof including screw, wall plug etc, including taking out old saddle complete all as specified and directed. |
| 37 | M & Lfor Air termination single pointed copper rod 12 mm dia 300mm long fixed on pole near gantry structure, including taking out old air termination rod complete all as specified and directed. |
| 38 | M & L for earth continuity conductor or main earthing lead fixed to wall& roof top in grid connection with air termination rod of size 25X 3mm aluminium strip including PVC saddles, including taking out old strip complete all as specified and directed. |
| 39 | M&L for earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25X4mm galvanised iron or steel strips, including taking out old strip complete all as specified and directed. |
| 40 | M&L in renewal for earthing complete for bldg with galvanized mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtr below ground level connected to galvanized iron strip 25x4mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber) 1:2:4 type B-1 using 20mm graded stone aggregate copy shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel wiht wire gauge of 22 gauge (0.68mm) 8 mesh per liner inch, 50 mm thick cover of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8 mm four MS bars @ 80mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth strip protected by 40mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, all excavation and earth work & connectiing the earthing to an earthing test point as specified and testing on complete all as specified and directed. |
| 41 | Supply and fix street light pole junction box factory made Triple Pole and neutral IP 65 thermoplastic PC-GFS polycarbonate oval shape, weather proof, rust free, dust free and corrosion free, with internal embedded polyureathin material gaskit, junction box should be flame retardant and self extinguish in accordance with IEC-60695-2-11, with multilevel knockouts for cable glands in different sizes. The junction box compression of optional cable entry in four side, 25 Sqmm terminal block - 04 Nos, MCB SP 10Awith flap - 01 No, Disconnected type neutral terminal 6 Sqmm-01No and Earth terminal block 4 Sqmm - 01 No including mounting arrangement, including taking out old junction box with accessories complete all as specified and directed.Make - Hensel cat./DRW No HENKFPJB-5 of equivalent make of same specification as given in Appendix C. |
| 42 | S & F of stranded aluminium conductor flat twin core PVC insulated unsheathed 1100V 10 Sqmm 2 core, including taking up and down old cable complete all as specified and directed. |
| 43 | S & F of round flexible PVC insulated copper cable of size 1.5 sqmm 3 core, 1100 volt grading, including taking up and down old cable complete all as specified and directed. |
| 44 | S&F for PVC conduit 20mm dia including fixing on wall/pole with necessary fixing arrangement complete all as specified and directed. |
| 45 | Supply and fixing of MS Chequered plate of5 mm thick or over in thickness in available of Fe - 290 Gde E165 and fixed in substation building including painting with black colour enamel paint over one coat of red oxide primer and making provision for lifting the plate from duct complete all as specified and directed. |
| 46 | M&L for glow sign board of size (length not less than 3.00m and width not less than 0.90m) for E/M installationwith computerised words printed on PVC board including fabrication of work, angle iron, electrical connection with suitable copper wire and LED tube light fittings complete all as specified and directed.Note: Matter and size of letters shall be approved by Engr-in-Charge. |
| 47 | Supply & fixing framed electrical safety wheather proof chart with and including writting latest procedure for giving first aid to electricuted victim complete all as specified and directed. |
| 48 | M&L for painting and writing with paint in all existing sign boards such as SM/MES No board of equipments and other board as per the direction given by Engr-in-Charge in E/M installation 33KV MRS, Berthuma and Chittorawith skilled painter after applying two coat synthetic enamel paint over a coat of primer complete all as specified and directed. Note:- Content,colour and letter size shall be approved by Engr-in-Charge. |
| 49 | M&L for computerised print on PVC board of size (length not less than 0.30m and width not less than 0.20m)with blue background and white letter of suitable size indicating incoming from, outgoing to the area of distribution, capacity and CT ratio fixed at the front side of each panel both HT and LT panel section wise complete including necessary fixing arragement in E/M installation/sub station complete all as specified and directed. Note: Matter and size of letters shall be approved by Engr-in-Charge. |
| 50 | S&F in renewal of LED bollard 15w, one meter height IP 65 energy saving, environmental friendly, long life aesthetically designed aluminium landcape luminaire for diffused lighting with high power LED light source complete all as specified and directed |
| 51 | S&F in renewal of LED bollard 8W, two feet height IP 65as a imposing street furniture. The elegant yet minimalsitic design actssilent observer and giving lihgt, diffuser at the upper portion acts a beacon of path guidance in a landscape environment complete all as specified and directed. |
| 52 | S&F in renewal of MUSHROOM (PRISMATIC) suitable for LED lamp upto 20W decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base with suitable size of flexible wire complete all as specified and directed. |
| 53 | S&F in renewal of MOON (PRISMATIC) width 200mm suitable for LED lamp upto20W decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base with suitable flexible wire complete all as specified and directed. |
| 54 | S&F in renewal of LED environmental friendly, new generation, energy saving, decorative rectangular shaped step light with IP protection for wall recessed application suitable for indentification of seats and steps inside the theatre/Auditorium complete all as specified and directed.Note:- Model or design and wattage shall be approved by Engr-in-Charge. |
| 55 | M & L for painting ofPCC pole (Cross arms, clamps etc) with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height of 1.2 m of pole 9 m long with 2 coats of synthetic enameled paint including preparation of old surfaces and making colour bands and rewriting the pole number complete all as specified and directed. |
| 56 | M & L for painting oftubular/ rail pole (Cross arms, clamps etc) with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height upto 9 m pole with 2 coats of synthetic enameled paint including preparation of old surfaces and making colour bands and rewriting the pole number complete all as specified and directed. |
| 57 | Supply only bamboo/wooden ladder of height not less than 20 feet of good strength to be used for external complaints of various nature complete all as specified and directed. |
| 58 | M & L for painting ofsteel structures in MRS including all cross arms, clamps and channel etc with 2 coats of aluminium paints and including preparation of surfaces and painting all poles upto the height 9 m and making bend etc with 2 coats of synthetic enameled paint including preparation of old surfacescomplete all as specified and directed. |
| 59 | S&F HT/LT pre cast cable route indicator with suitable size crushed stone aggregate and steel bars of size 160mm (Length)X100mm (Width)X900mm (Height) duly painted with cement base and written in white colour with lettering \"MES HT cable\" and arrow indicating direction using two coats of synthetic enamel paint in black colour and including necessary earthwork and excavation, embedded in PCC M15(Nominal Mix) using 20mm nominal graded crushed stone aggregate of size 400mmx400mmx300mm complete all as specified and directed.NOTE : The reinforcement in RCC shall not be less than as minimum reinforcement required as per IS. |
| 60 | M & L for repairing and servicing two/four pole structures comprising of following works :- (a) Dismantling the ACSR jumper connection from Air break Gang operated drop out fuse and lightening arrestors etc from the two poles structures, replacing the complete jumpers in to new with ACSR conductors includingconnecting with suitable thimbles connections/binding/PG clamps and providing monoplast compound over binding/thimble connections.b) Removing the complete rusted bolts, nuts and washers and replacing with new bolts, nuts and washers.(c)Disconnecting the AB switch knives cleaning and servicing by lubricating the moving parts terminals with petroleum jelly. (d) Cleaning the exposed surfaces of two pole structure complete and painting with two coats of synthetic enamel aluminium paint complete all as specified and directed. |
| 61 | Cutting /trimming of tree branches upto 80 mm girth along LT/HT OH electric lines which or growing /touching or falling on ACSR conductor /poles or near by sub stns etc at any height from GL and making sufficient clearance not less than 1.5 mtr from ACSR conductor/ poles/ structure and taking down the same on the ground carefully avoiding the damage of and removing to a distance including stretching of conductor as required where directed by Engr - in -charge. Note :- Tree cutting will be maintain for periodicity for three months depending upon the growth of three branches. |
| 62 | M&L for checking, overhauling and repair of all-in-one solar street light of 15W to 30W in site/taking to workshop and made functional by replacement of spare parts as required complete all as specified and as directed.Note: Spare parts required for making functional of solar light shall deemed to be included in quoted rate and no extra admissible in this account. |
