Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-04-2025 | Correction in technical document page no-10 | Technical Bid | 08-04-2025 |
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal sizederived from natural sources) |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 5 | Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 6 | Treatment of soil under floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (Plinth band) |
| 8 | Above plinth level (Lintel band) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (Tie beam) |
| 10 | Above plinth level (Beam & Slab) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (Footing) |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (Columns) |
| 13 | Above plinth level (Column) |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class -150in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 18 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 19 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) |
| 20 | Painting in D.P.C.With two coats of airblown bitumen 85/50 or 85/25 @ about1.7 Kg./Sqm including cost of fuel if any. |
| 21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 22 | 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 F.M. |
| 23 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) |
| 24 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) |
| 25 | 12 MM thick plaster (1:3) coarse sand |
| 26 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor). |
| 27 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarsesand), finished with a floating coat of neat cement. 18 mm thick |
| 28 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick |
| 29 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 30 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. Flats,square or round bars etc. all complete. Fixed to Steel windows by welding |
| 31 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 32 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks,mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensilesteel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of requiredthickness for rolling shutters. 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover. |
| 33 | Providing and fixing ball bearing for rolling shutters. |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 35 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed ofcement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joint with white cement & matching pigments etc. complete.. Size of Tile 600x600 mm |
| 36 | Laying of 25 mm thick Kota stone of size 45x45 cm and above flooring over previously prepared base with 2cm 1:3 cement & sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting polishing with wax polish including supply of all material T & P etc required for proper completion of the work. |
| 37 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 38 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 39 | Supply and fixing 6 mm (1/4\") thick China glazed tiles in flooring laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm). |
| 40 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 41 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). |
| 42 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick |
| 43 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 44 | Columns, Pillars, Piers, Abutments, Posts and Struts . |
| 45 | Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick. |
| 46 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer\"s specification andirection of Engineer-in-charge. |
| 47 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer\"sspecification and direction of Engineer-in-charge. |
| 48 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 49 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Casement window single panel with S.S. 304 friction hinges as per size and weight of sash,multi-point locking system, zinc alloy (zamak) powder coated handles, Using R2 series with frame (39mm & above) x (39mm & above) & sash (39mm & above) x(60mm & above). (Height upto 1.2 metre) |
| 50 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat. (Inner+Ceiling Area) |
| 52 | Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.67 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm. |
| 53 | Finishing walls with Putty with approved brand and manufacturer and required shad and undecorated wall surface to give and even shad over including curing and cost of material laour, T&P required for porper completion of the work. |
| 54 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. |
| 55 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating notless than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, withnuts and screws etc. complete : 250x16 mm |
| 56 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not lessthan grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, withnecessary screws etc. complete :(a) 300 mm x 10mm |
| 57 | (b) 250 mm x 10mm |
| 58 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less thangrade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessaryscrews etc. complete : 125 mm |
| 59 | Providing & fixing of Mangalore tiles on roof. |
| 60 | Providing and fixing false ceiling at all height including providing and fixing of frame workmade of special sections, power pressed from M.S. sheets and galvanized with zinc coatingof 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm diabolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required lengthwith nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which theceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicularto G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high havingflanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the helpof rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, includingfixing of gypsum board to ceiling section and perimeter channel with the help of dry wallscrews of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish oftapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of jointand two coats of primer suitable for board, all as per manufacturer’s specification and alsoincluding the cost of making openings for light fittings, grills, diffusers, cutouts made withframe of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Boardwith BIS certification marks) |
| 61 | Steel Painting: (a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works. |
| 62 | (b) Painting withsynthetic enamel paint of approvedbrandand manufactureto give an even shade:Two or more coats on new work. |
| 63 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 64 | Providing & fixing of Red sand stone work in gate including labour, material with cutting Making moulding & cornice ingraving as per Design in direction of engineer in charge .30mm thick wall linning |
| 65 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).Red sand stone - 30mm thick gang saw cut stone |
| 66 | Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. |
| 67 | Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. |
| 68 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone |
| 69 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigmen |
| 70 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 71 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding |
| 72 | Wooden pipes on sitting |
| 73 | SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING)Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid |
| 74 | White Vitreous china wash besin size 630x450mm with a pair of 15mm cp brass pillar tap |
| 75 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge |
| 76 | Providing and fixing 600 x 450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete in all respect.Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length |
| 77 | 15 mm nominal bore |
| 78 | PProviding and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 79 | Providing and fixing toilet paper holder.Vitreous china |
| 80 | Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects. (Angle valve to be provide under item no. 18 and measure with that item.) |
| 81 | Supply, Installation, Testing and commissioning of wall hanging drinking online water cooler with bottle filler facility, made by stainless steel top and heavy duty galvanized steel frame. With cooling capacity, ADA Compliant, size 472 mm Depth X 447mm width, flexible bubbler guard , operated between 50 to 120 PSI, Chiller unit Suitable to R134a Refrigerant, Adjustable thermostatcontrol, suitable for 220-230v/50-60 hz A/C Supply Complete with all accessories which include MD-CU29, which is an EPA registered antimicrobial copper that fights off microorganisms which include MRSA and e-coli. The water Fountain shall possess NSF-USA, Green building, energy star saving certification,and to be placed at different location of buidling. Agency has to execute all civil work for installing the Water Fountain for proper functioning and aesthetic view as directed by the engineer-in-charge without any extra cost.WITH 40 LPH RO System with 40 ltr HTP Storage tank |
| 82 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 83 | Providing and fixing brass bib cock of approved quality |
| 84 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizesespectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 85 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.White Agaria Marble Stone |
| 86 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore |
| 87 | Providing and fixing water closet squatting pan (Indian type W.C pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings andfixtur es complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 88 | Providing, fixing and jointing UV stabilized SWR (Type - B) pipes conforming to IS:13592 including all fittings such as bends, clamps, tees, cowls, clean out plugs, offsets, Y-tees, tees, door fittings, clips, clamps, stays etc. conforming to IS-14735, including jointing with rubber gasket fixing in sunk areas, Fixing at wall / ceiling level supported by steel clamps & hangers etc.including Cutting, chases/ holes in floors / walls / slab and making good the same after pipe have been duly laid and testing complete in all respects.110 OD (Sewerage & Drainage) |
| 89 | Providing, fixing and jointing UV stabilized SWRpipes conforming to IS:4985 including all fittings such as bends, clamps, tees,, offsets, Y-tees, tees, clips, clamps, stays etc. conforming to IS-14735, including jointing with rubber gasket fixing in sunk areas, Fixing at wall / ceiling level supported by steel clamps & hangers etc.including Cutting, chases/ holes in floors / walls / slab and making good the same after pipe have been duly laid and testing complete in all respects.50 mm OD |
| 90 | 63 mm OD |
| 91 | Providingandfixingin position uPVC SWR floor trap conforming to IS:13592including providing necessary steel support and as per Specification. Making proper connection cutting chase / holein floors / slabs and bringingthesame inpropercondition andshapeafterplacingthe trap in rightpositioncompleteasrequired. The hopper and trap shall be set in cement concrete mix 1:2:4 complete as required. 110 mm inlet and 110 mm outlet |
| 92 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm and down gauge). |
| 93 | Providing, fixing and jointing UV stabilized uPVC rain water pipes conforming to IS:4985 (working pressure 6 kg/sqcm.) including all fittings such as bends, clamps, tees, cowls, clean out plugs etc including Fixing at wall / ceiling level supported by steel clamps & hangers etc. including Cutting, chases/holes in floors / walls / slab and making good the same after pipe have been duly laid and testing complete in all respects.(I) Single socketed pipes 110 mm diameter |
| 94 | Providing & fixing 110OD x 63 OD G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe. |
| 95 | Providing, fixing, testing and commissioning stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Floor Trap/Floor Drain)100 mm X 100 mm. |
| 96 | 125 mm X 125 mm. |
| 97 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 98 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 99 | Providing, installation, jointing and testing of PVC Floor clean out Plug made out of upvc bend, Pvc pipe piece , threaded Pvc socket(FTA), with minimum 100mm bronze threaded cap, suitable insert keysfor opening including making joint to PVC main line as required comleter in all respect. |
| 100 | SUB HEAD - III - (WATER SUPPLY)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm dia nominal bore |
| 101 | 20 mm dia nominal bore |
| 102 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(Exposed on Wall)15 mm dia nominal bore |
| 103 | 20 mm dia nominal bore |
| 104 | 25 mm dia nominal bore |
| 105 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace15 mm dia nominal bore |
| 106 | 20 mm dia nominal bore |
| 107 | 25 mm dia nominal bore |
| 108 | 40 mm dia nominal bore |
| 109 | Painting G.I. pipes and fittings with two coats of anti-corrosivebitumastic paint of approved quality :15 mm dia nominal bore |
| 110 | 20 mm dia nominal bore |
| 111 | 25 mm dia nominal bore |
| 112 | Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.20 mm dia. |
| 113 | 25 mm dia. |
| 114 | 32 mm dia. |
| 115 | ESTIMATE- EXTERNAL PLUMBING WORKS SUB HEAD - I - (SEWERAGE AND DRAINAGE) Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m.Pipes, cables etc. exceeding 80mm dia. But not exceeding 300mm dia. |
| 116 | Extra over for item no. 1.1 excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre).Pipes, cables etc. exceeding 80mm dia. But not exceeding 300mm dia. |
| 117 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :-150 mm dia R.C.C pipe |
| 118 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) up to haunches of S.W./RCC pipes including bed concrete as per standard design :-150 mm dia R.C.C pipe |
| 119 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be leveled and neatly dressed. (For Manholes)All kinds of soil |
| 120 | Providing and fixing precast concrete chamber 1000x802mm depth,connector bar welded to MS strip,SFRC cover,SFRC footstep,precast circular cc rings size 300 mm , recast bottom circularcomplete as per standard design :rings 225mm high of M-40 grade,CC-M-15(1:2:4) & CC M:10 (1:4:8) complete as per standard design. |
| 121 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design:-With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Extra depth beyond 45 cm of brick masonry chamber.For 600x850 mm size |
| 122 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 123 | Constructing RCC precast perforated RCC. slab covered Drain with 150mm thick RCC 1.1.5.3 ( 1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size) wallincluding earth excavation, 75mm thick bed concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) and 100mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design:45 cm drain 60 cm average depth |
| 124 | Providing and fixing FRP oil/grease separator at washing area ground standard including all fittings of approved quality conforming to latest IS. |
| 125 | SUB HEAD - II - EXTERNAL WATER SUPPLY Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :-All kinds of soil Pipes, cables etc, not exceeding 80 mm dia. |
| 126 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.20 mm dia nominal bore |
| 127 | 50 mm dia nominal bore |
| 128 | 40 mm dia nominal bore |
| 129 | 32 mm dia nominal bore |
| 130 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :-50 mm diameter pipe |
| 131 | 40 mm diameter pipe |
| 132 | 32 mm diameter pipe |
| 133 | 20 mm diameter pipe |
| 134 | Constructing masonry Chamber 60 x 60 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.With F.P.S. bricks |
| 135 | Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work.50 mm dia |
| 136 | 40 mm dia |
| 137 | 32 mm dia |
| 138 | 20 mm dia |
| 139 | Providing ,fixing, testing and commissioningbutterfly valve of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts ,bolts,washers ,gaskets conforming IS 13095 of following size as required.50 mm dia. |
| 140 | THEME PARKSUB-HEAD-I: CIRCUIT CUM POINT WIRING Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc as required.Group-C (Primary point ) |
| 141 | Wiring forgroup controlled (looping) light point /fan point / exhaust fan point/call bell point (without independent switch etc) with 1.5 sqmm FRLS PVC insulated copper conductor cable in surface/recessedPVC conduitand earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cableetc.as required.Group-C (looping point ) |
| 142 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 143 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 144 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 145 | Supplying and fixing 32 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 32 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 146 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire For Light Circuit Point |
| 147 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For Light Circuit Point |
| 148 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire For Power Circuit Point |
| 149 | 2 X 10 sq. mm + 1 X 10 sq. mm earth wire For Industrial Power Socket |
| 150 | 4 X 10 sq. mm + 2 X 10 sq. mm earth wire For Submain Wire / Cable of DB |
| 151 | 4 X 16 sq. mm + 2 X 16 sq. mm earth wire For Submain Wire / Cable of DB |
| 152 | SUB-HEAD-II:- CABLE TRAYS AND ACESSERIES :Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 153 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 154 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 155 | Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 156 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 157 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 158 | Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 159 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 160 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 161 | Supplying and installing following size of perforated pre-painted M.S. cable trays Tee’s with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 162 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 163 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 164 | Supplying and installing following size of perforated pre-painted M.S. cable trays cross members with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 165 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 166 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 167 | SUB-HEAD-III:- DISTRIBUTION BOARDS Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way (4 + 36), Double door |
| 168 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required.Single pole (6/32 Amps) |
| 169 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 170 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps |
| 171 | Supplying and fixing Single Pole Blanking Plate in the existing MCB DB complete Etc. as required. |
| 172 | SUB-HEAD-IV:- EARTHING INSTALLATION Supply, Testing & Commissioning, fixing of following bare GI tapes / wires including all necessary fixingaccessories and effecting connections as per specifications.Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 173 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 174 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 175 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 176 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 177 | SUB-HEAD - V :-CONDUITING WIRING AND CABLING FORTELEPHONE / TV NETWORK SYSTEM Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20mm |
| 178 | 25mm |
| 179 | 32mm |
| 180 | Supply, fixing, connecting and testing of elephone/computer/TV modular sockets modular plate anodised MS box and blanking late in surface/recessedincluding connectionetc as required.RJ-11 telephone socket two line with shutter |
| 181 | T.V. CO-axial cable socket outlets of one point |
| 182 | RJ-45 face plate( computer line) with shutter DN-460 |
| 183 | Providing, fixing connecting and testing of solder less telephone Tag blockoffollowing capacity ties as required in suitable size ofm.s. hinged lockable cover boxduly painted etc. as required of Krone type.2 pair Tele Tag Blk |
| 184 | Providing, fixing connecting and testing of solder less Television Junction Box offollowing capacity ties as required in suitable size of m.s. hinged lockable cover box duly painted etc. as required of Krone type.2 pair T.V Junction Box. |
| 185 | Supplying drawing, connecting and testing of 0.61mm dia annealed copper conductor PVC insulated PVC sheathed telephone Wire/cables in Existing PVC conduit or a racks as required. 2 pair Telephone cable. (0.61sq mm) |
| 186 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 187 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 188 | Supplying and fixing metal box of following sizes (nominal size) on surface or in reces with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm x 75 mm x 60 mm deep |
| 189 | SUB-HEAD-VI:- CABLES, MAINS AND SUB MAINS Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts over bed of sand, clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.3.5 core 120 sq. mmFor Floor Panel |
| 190 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 120 sq. mm (45mm) |
| 191 | SUB-HEAD-VII:- SUPPLY OF LIGHTING FIXTURES. Supply & ITC of the following lighting fixtures with all fixing accessories etc. as required. Supply ,fixing , testing and commissioning of 15W LED Circular Type Surface Mounted Down Light |
| 192 | Supply ,fixing , testing and commissioning of 20W LED Surface mounted Tube Light All accessories as required. |
| 193 | Supply ,fixing , testing and commissioning of 6W LED recess mounted TYPEDOWN LIGHTERS fixture all accessories as required Equivalent |
| 194 | Supply ,fixing , testing and commissioning of 13W LED 2 feet tube light/mirror Light fixture all accessories as required |
| 195 | Supply ,fixing , testing and commissioning of 36W LED (600X600) LIGHTfixture all accessories as required Equivalent |
| 196 | Supply ,fixing , testing and commissioning of Ceiling Fan (1200MM Sweep) all accessories as required Equivalent |
| 197 | SUB-HEAD - VIII -ADVANCE LIGHTNING PROTECTION SYSTEM Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 198 | Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required. |
| 199 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required |
| 200 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 201 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 202 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required |
| 203 | Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. |
| 204 | SUB HEAD-X: FIRE ALARM SYSTEM Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required. |
| 205 | Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. |
| 206 | Supplying, installation, testing & commissioning of addressable manual call point complete as required |
| 207 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. (Two Loop Panel.) |
| 208 | Supply, installation testing and commissioning of 2W Double sided LED signage with built in battery back-up for minimum of 3hrs continuous operation in an active mode. luminaire shall be fitted with a bi-colour Red/Green LED to indicate its status. complete with all accessories as per required. |
| 209 | Supplying and Wiring following sizes of PVC insulated FR twin twisted copper conductor stranded cables shall be 650 volts grade cable in the existing surface/recessed steel conduit as required.Armoured Cable copper conductor size 1.5 x 2 core sqmm |
| 210 | Supplying and fixing rigid steel conduit ISI marked along with the accessories in concealed system including cutting the wall and plastering & repainting the wall with matching colour to bring in its original condition as required 25mm dia |
| 211 | SUB HEAD-XI: ELECTRICAL FLOOE PANEL1 No. 250 Amps FP MCCB with following accessories:VAF digital electronic meter with inbuilt selector switch and 250/5 Amps suitable VA, CL 1 CTs . -1 SetPhase indicating light shall be protected by 2 Amps SP MCB\"s -3 SetBus Bars 300 Amps TPN Aluminiumbars with heat coloured shrinkable insulation sleeve - 1 Set Outgoing 100Amps FPMCCB- 5 No.63Amps FPMCB- 5 No.40Amps FPMCB- 4 No.Spare 63Amps FPMCB- 1 No.40Amps FPMCB- 1 No.Notes:-All MCCB\"s shall be of 25 KA (Ics) breaking capacity.All MCB\"s shall be of 10 KA breaking capacity.FLOOR PANEL described as above |
| 212 | EXTERNAL ELECTRICAL SUB-HEAD-I:- CABLES, MAINS AND SUB MAINS Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays, ducts over bed of sand, clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.3.5 core 150 sq. mm |
| 213 | 3.5 core 120 sq. mm For Fire & Plumbing Pump Panel. |
| 214 | 3.5 core 70 sq. mm For External Lighting Panel |
| 215 | 3.5 core 50 sq. mm For Panel |
| 216 | 3.5 core 35 sq. mm ForPanel, STP & ETP Panel. |
| 217 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 150 sq. mm (50mm) |
| 218 | 3½ X 120 sq. mm (45mm) |
| 219 | 3½ X 70 sq. mm (38mm) |
| 220 | 3½ X 50 sq. mm (35mm) |
| 221 | 3½ X 35 sq. mm (32mm) |
| 222 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground leve l over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. For External Lighting.6 sq. mm 2 core |
| 223 | 10 sq. mm 2 core |
| 224 | 16 sq. mm 2 core |
| 225 | 4 sq. mm 3 core |
| 226 | 6 sq. mm 3 core |
| 227 | 4 sq. mm 4 core |
| 228 | 6 sq. mm 4 core |
| 229 | 10 sq. mm 4 core |
| 230 | 16 sq. mm 4 core |
| 231 | SUB-HEAD-III:- EARTHING INSTALLATION SITC of “Uniearth” ‘Flat in Pipe’ model maintenance freeGI chemical earthing system consisting of environment friendly ground enhancing compound “UniEarth” ‘G.E.C’ 50 kg having anticorrosive and hygroscopic properties to replace excavated soil.It should consist of“Uniearth” G.I. electrode, theelectrode should be hot dipped galvanisedwith a thickness 86-100 microns in 3 metre length of 50mm diameter and pipe thickness 2.9 mm.The internal conductor should consist of 32 x 6 mm G.I. flat running throughoutthe length of electrode having 2 holes of 12 mm dia at the terminal for connection purpose. The annular space in between the flat and pipe should consist of “Uniearth” Electrofill – highly conductive compound facilitating faster dissipation of fault current. The bottom end of the electrode should be conically disk shaped to enable proper fixation of electrode in the soil. The electrode should be duly tested and certified by CPRI.sor no 725( r) |
| 232 | SITC of \"Unicarth\" \"Copper Pipe\" model maintenance free Pure-Copper chemical earthing system consisting of environment friendly ground enhancing compound \"Uniearth \"G.E.C\" at least 50 kg having anticorrosive and hygroscopic properties to replace excavated soil. It should consist of \"Uniearth\" Copper Pipe electrode in 3 metre length of 50 mm diameter. The Terminal strip of 25 x 5 mm Copper flat having 2 holes of 12 mm dia at the terminal for connection ose. The annular space in between the flat and pipe purpose. should consist of \"Uniearth\" Electrofill highly conductive compound facilitating faster dissipation of fault current. The bottom end of pipe should be conically disk shaped to enable proper fixation of electrode in the soil. The electrode should be duly tested and certified by CPRIUASOR 2018/727 |
| 233 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 234 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. |
| 235 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 236 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 237 | SUB-HEAD-V:- MAIN LT PANEL & MAIN DISTRIBUTION PANEL Design, fabrication, assembling, wiring, testing, supply, forwarding to site, unloading, shifting to location, inspection, installation, testing and commissioning of DG & Transformer Changeover Panel cum Main LT Panel, Main distribution panels/ sub-distribution panels and capacitor panel, fabricated out of 14 gauge CRCA sheet steel in cubicle formation, compartmentalized, from 3b consutruction, free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and/ or flats wherever necessary. 16 gauge CRCA sheet steel shall be used for final distribution panels. 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 No. earthing terminals shall be provided for all distrtibution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZsupply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication.Galvanised hardwares with zinc passivation shall be used in fabrication of panels.Fidder pillar as discribed above AS PER DIRECTION OF ENGINEER INCHARGE |
| 238 | SUB HEAD- VI: EXTERNAL LIGHTING WORKThe rates for fixing of lighting fixtures shall include all fixing accessories that may be required to make the installation complete in all respects .Internal wiring between accessories connecting wires wherever required.Earthing of fixtures .Supply, fitting, wiring, testing and commissioning of Linear Light 15 Watt LEDEtc. |
| 239 | Supply, fitting, wiring, testing and commissioning of Path finder Light 12 Watt LEDEtc. |
| 240 | Supply, fitting, wiring, testing and commissioning of Short bollard Light 8 Watt LED / (Size - 8\") Etc. |
| 241 | Supply, fitting, wiring, testing and commissioning of Tall bollard Light 12 Watt LED / (Size - 2\") Etc. |
| 242 | Supply, fitting, wiring, testing and commissioning ofTree uplighter as per selection (6-8 W)Etc. |
| 243 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.16 Mtr. High Mast Flood LIght FIxture Set |
| 244 | Supply, fitting, wiring, testing and commissioning of Column light 24 Watt LED / (Size - 15\" foot ) Etc. |
| 245 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. |
| 246 | Supply & erection of \"D\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . |
| 247 | Supply, fitting, wiring, testing and commissioning ofSpikes as per selection 6 Watt LED / (Size - 5\" foot ) Etc. |
| 248 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 249 | 90 mm dia (OD-90 mm & ID-76 mm nominal |
| 250 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 251 | EARTHWORKTrenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 252 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 253 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :screened through sieve of I.S. designation 20 mm |
| 254 | Rough dressing the trenched ground including breaking clods. |
| 255 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. |
| 256 | Fine dressing of the ground. |
| 257 | Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).In rows 5 cm apart in both directions |
| 258 | with grass turf |
| 259 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed (the cost of sludge, manure and the good earth shall be paid for separately). |
| 260 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. |
| 261 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)\" |
| 262 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)Tree plant |
| 263 | Shrub plant |
| 264 | Hedge plant/ground cover |
| 265 | GROUND COVER SPECIES All Ground Cover varieties should have Min spacing of .075M except otherwise mentioned.Canna indica |
| 266 | Chlorophytum comosum |
| 267 | Cynodon dactylon |
| 268 | Wedelia Trilobata |
| 269 | Euphorbia cotinifolia |
| 270 | Creeper Syngonium |
| 271 | Topiary Bougainvillea umbrella |
| 272 | Ficus benjamina |
| 273 | Ficus retusa |
| 274 | SHRUB SPECIESShrubs will be in Full Form, Foliage and Spread. Tabernaemontana Coronaria |
| 275 | Hibiscus (Red) |
| 276 | Thuja occidentalis |
| 277 | Nerium oleander |
| 278 | Schefflera arboricola |
| 279 | Codiaeum variegatum |
| 280 | Plumeria alba |
| 281 | PALMS Areca palm |
| 282 | Rhaphis palm |
| 283 | Bottle palm |
| 284 | cyces palm |
| 285 | Tabebuia |
| 286 | TREE SPECIES Note: All Tree varieties will have Min.Ht. Of 10\"0\" to 12\"0\"and the Fish Tail Plam will have Min.Ht.of 12\"0\" to 15\"0\"Alstonia Scholaris |
| 287 | Azadiractha indica |
| 288 | Butea monosperma |
| 289 | Cassia fistula |
| 290 | Delonix Regia |
| 291 | Ficus benghalensis |
| 292 | Magnifera indica |
| 293 | Michalia Champaca |
| 294 | Mimusops Elengi |
| 295 | Neolamarckia cadamba |
| 296 | Nyctanthes arbor-tristis |
| 297 | Phyllanthus emblica |
| 298 | Putranjiva roxburghii |
| 299 | Saraca asoca |
| 300 | Terminalia arjuna |
| 301 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge,400mm dia |
| 302 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. |
| 303 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. |
| 304 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 305 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 306 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge. |
| 307 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin-charge. |
| 308 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. |
| 309 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. |
| 310 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge |
| 311 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: |
| 312 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. |
| 313 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). |
| 314 | Holographic Projectiong MAIN SPEAKER:- Two Way Coaxial weatherised Line Array speaker designed to meet IP56 standards with 1 x 15\" LF Driver (3\" VC) , 1.4\" Exit HF Driver (3\"VC), Power Handling min. 1000W. Dispersion - Array defined.Sensitivity 103db, Max SPL 136db, Fully Weatherized Outdoor UV resistant cabinet with aluminium/ Stainless steel grille and OEM Array frames. Make:- VAL audio/JBL / Martin Audio / d&b audiotechnic |
| 315 | SUBWOOFER:- Dual 18\" Subwoofer with min 2400W RMS, Nominal impedance: 4 ohms, Frequency response : 34Hz - 1500KHz, Sensitivity : 100dB , Max SPL: 139dB peak, Exterior grade Birch Plywood Heavily braced with Tongue & Groove, Textured Waterborne Black coating Acoustic PU foam behind Front grill 6 pcs Make-VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 316 | ENCLOSURE FOR SUBWOOFER:- Weatherproof MS enclosure for dual 18\" subwoofer, fabricated using 2 mm CRCA sheet reinforced to avoid resonance, internally insulated using vibration free 25mm XLPE sheets, canopy on top to further prevent water ingress, protective perforated front grille with internal reticulated foam, seven times processed powdered coated paint |
| 317 | AMPLIFIER FOR MAIN & SURROUND SPEAKER:- High performance 4 channel class H power amplifier in 2U frame, 4x800W @8 ohm, 4x1250W @4 ohm, useable as 4/3/2 ch amplifier, heavy duty Toroidal PSU, comprehensive protection circuitry. Make-VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 318 | AMPLIFIER FOR SUBWOOFER:- High performance 2 channel class D power amplifier in 2U frame, 2x2000W @8 ohm, 2x3500W @4 ohm, heavy duty. Make-VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audio technic |
| 319 | CONTROL ROOM SPEAKER:- Two-Way Indoor / Outdoor Surface Mount Loudspeaker, LF 6.5\", Power handling 60W RMS, 120W Program, 240WPeak, Frequency response : 65Hz - 20KHz, Sensitivity : 89dB , Max SPL :114dB peak, 70/100V Transformer taps, black colour, Weatherised ABScabinet designed to meet IP55 standards, U bracket included. Make-VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 320 | MIXER AMPLIFIER:- Mixer amplifier total output power 120W : 4-16 ohm or 70V/100V operation, Bluetooth/USB/FM radio media player, 3 Aux and 2 microphone inputs, toroidal transformer. Make-VAL audio/JBL / Martin Audio /CELTO Acoustique/ d&b audiotechnic |
| 321 | SITC for DLP Laser Phosphor projector Min. 45,000 ISO Lumen, Support 4K resolution (4096 x 2160), Native 1920 x 1200 resolution with 16:10 aspect ratio, Contrast ratio (Dynamic) min. 18000:1 or higher, 24 x 7 operation, Selectable EDID, 30-bit Colour processing, auto Input source switching redundancy, IP60 Rated sealed optics complete dust protection and filterless operation with liquid cooled technology and min. 0.06mm Conformal Coating on all critical PCBs for protection against environment and corrosion. Typical illumination Life: 20,000 hours or better. Inputs: 2 x Display port, 2 x HDMI, 1 x HDBaseT, 3G-SDI in/out Controls: 3D sync in/out, Crestron RoomView Connected, LAN, RS-232, AMX, DMX Art-Net along with lens as per Site. Make: Barco/Christie/Digital Projection/ NEC/Panasonic |
| 322 | SITC of Animation Laser :Source - Laser Diode : 20w RGB/RGBY, Power Consumption ≤ 500w, Scanner - 40kpps, Scan Angle - ±30°, Linearity DIstotion <2%, Beam Diameter And Divergence : 9x6.5mm, 1.2mrad, Control modes - Integrated Hardware to Support Animation Software Over ILDA or CAT6 ,Ingress Protection - IP65 Make: MARTIN/ LBT / KVANT / ARCTIK / CAMEO |
| 323 | Projection housing enclosure with DEC Control Interface for setup and monitoring of temperature, humidity and status indicators. Power control circuit with PID Management system compatible with the projection housing unit and display unit. Make: Cutomised |
| 324 | Assembly and mounting of projector as per site plan with cables, mounting brackets and tilt/pan arrangement systems for projection layout. |
| 325 | SITC of a powerful IP hybrid Moving head And Image Projector, with high-efficient optics, wide zoom angle from 2.7°-33°,providing a strong Beam and Spot effect. It should has fast and silent X/Y movement, professional high qualitycolor wheel, extremely clean static and rotation gobo projection, Perfect product for outdoor concerts/events, commercial complex, theme park and amusement park. The Moving head should follow the Below mentioned Technical Specification : Max. Power ≥ 560W, Light source ≥ LED 450W, Angle - 2.7-33°, Display - On board Control, Custom Mode,0-25Hz Strobe, Pan/Tilt rotation - 540°/270° (8-16bit), Con Personality - BASIC/21CHS, STANDARD/25CHS, Extend/29CHS, Rotating Gobo - 7 Gobos+ White, Gobo-flow effect, Gobo shake, Bi-directional rotation, Colors - CMY wheel One color wheel (7dichroic-filters+White，Rainbow-flow effect), Prism - One piece of 5 F prism with bi-directional rotation, Speed adjustable, Animation Wheel - Bi-directional rotation,Speed adjustfable, Frost - 1 Frost filter, Focus - Motorized linear focus, Special - Pan/Tilt movement blackout, User-selectable pan/tilt ranges, gravitation sensor for auto screen positioning, Voltage - AC100~240V 50/60Hz, Operating Protocol - DMX512 + RDM, IP Rating ≥ IP65, Operating Temp. - -20°C-50°C, Built - VO / Die Cast Alluminium, Certification - BIS. Make: MARTIN/ LBT / KVANT / ARCTIK / CAMEO |
| 326 | \"SITC of LED Linear Wash : 48W RGBW, Input voltage - 48VDC, 900mm |
| 327 | SITC of DC power driver for the above Lights, Power : 200/300W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP65, Surge protection : LL 4KV, LE 6KV |
| 328 | Signal + Power Cable for above mentioned Linear Lights |
| 329 | Supply, Installation, Testing and Commissioning Equipment Rack 32 U Steel Doors — plain, vented at bottom, fully perforated and dual perforated, Glass Doors —with optional vented side trims for front-to-back air flow |
| 330 | Signal Amplifier and Splitter : 8 Channel , Supports RDM and DMX 512, 1P20, Tray Mounting Available. |
| 331 | 24 inches Flat LCD Display Monitors with Optimal Resolution of 1920 x1080 at 60 Hz having Brightness 250 cd/rril (typical). |
| 332 | SITC of CAT6 To DMX Converter Or Artnet : 2 Universe , Supports RDM and DMX S12, 1P20, Tray Mounting Available. |
| 333 | SITC of Workstation with Intel Xeon processor with Intel IViainboard/Intel chipset motherboard.SSD Hard drive 500 gb ( 2 nos.) for Raid 1. Nvidia GTX 950 — GTX 970 graphic card. 16 GB RAM Tower cabinet with 750 PSU with 750 PSU ,DVD drive.Windows 7/8.1 Professional 64 bit. |
| 334 | SITC of 4 Output Server with following specifications: -INTEL CORE I7,12TH GEN12700KF CPUASUS B760 I GAMING AX WIFI MOTHERBOARD ,G SKIL32 GB DDR5- RAM 5200 MHZ SAMSUNG 2TB 990 PROSNV ME RTX A5000 ASUS TUF 850W SMPSANT ESPORT RACK 423 PRO WITH RAIL KIT COOLER MASTER 620S, 10 Gig Ethernet, Window 10 Enterprise 64 Bit, 24\" 1920 x 1200 pixels Monitor, USB Keyboard and Mouse, Complete as required. |
| 335 | Media Player and Programming software should support video mapping, projection mapping, 3D mapping for multiple outputs Make: Watchout/ 7th Sense/ Vioso/ Screenberry |
| 336 | SITC for SS holographic interwoven mesh length 20*32 ftminimum, gap not exceeding 1mm, perpendicular array, due cotted with holographic compliant projection paint ie acromatic between 400-550 nm in wave length. Mesh harnest and anchor as per design. |
| 337 | SITC 20 KVA UPS, true on- line UPS 3 Ph double Conversion with all safeties and protection and suitable capacity sealed maintenance free 12 V batterie with a 15 mins backup time online load with open Battery rack and cableMake: Delta/ Schneider/ Vertiv/ Celltronic |
| 338 | Supply, installation testing and commissioning Small Business 8 port 1 Gig switch.Fibre optic cable with required accessories.Enclosure for Speakers & Subwoofer set.Electrical panel, Power cabling and other electrical accessories with ISI Standard. CAT 6twisted unshielded pair cable. All Audio ,video,DMX Cables and Connectors |
| 339 | 20-25 Min Content Creation including, research, original music creation with 2D/3D animation, voice over in hindi language usingnew and approved script |
| 340 | MIRROR MAZE ESTIMATE Construction and Operation of Walk through Mirror Maze Site Survey, Layout Study, Design and Drawings of the Ocean Adventure Walk-through Optical Illusion Puzzle |
| 341 | Puzzle Elements:These shall be a network of triangular cells with themed decorative and reflective properties.The elements are triangular arch shape with side of more than 1500mm, made up of 18mm/12mm MDF board with vinyl printing on surface as per theme with infill strip to cover the edges , keystones made up of MDF board with vinyl printing to cover up the arch joint and Mirrors . The structure is supported by MS posts which are bound together with tie bars to make the grid. |
| 342 | The dimension of mirror is 2100mm x 1200mm x 6mm thick. Make Saint Gobain or equivalentSpecial Effects-A magic window which ‘opens’ to show an animated scene/character with sound |
| 343 | False exit illusion |
| 344 | Special effects- Destination chamber |
| 345 | Special optical effect |
| 346 | Blackout Passage |
| 347 | Suitable sound track playing on a loop and system comprising: min 250w RMSamplifier with digital file input and 8no6”dia 30w 100v speakers distributed throughout the maze.Make: Bose/L-Acoustic/D&B Audio Technik/TW Audio |
| 348 | LED lights 6W minimum RGB colour changing including related cables etc Make : Philips / Osram / Bridge lux / Cree / Seoul |
| 349 | Other light effects |
| 350 | Forming internal passage ways including at entrance and exit. |
| 351 | Explanatory panel for entrance |
| 352 | Facade design in adhesive vinyl flex |
| 353 | Enclosure for sound system equipment |
| 354 | Switch panel controlling lights. |
| 355 | Selfie Photo Booth |
| 356 | Packing and freight |
| 357 | Training operators/attendants |
| 358 | Air conditioner 2 ton Type of Air Conditioner: High wall Split AC (Hot and Cold)Compressor (Speed Type): Inverter (Variable Speed)Air ConditioningTechnology: Hot and ColdHeating Mechanism Heat PumpNominal Capacity (TR):2 TonneNominal Cooling Capacity (kcal/hr) : 6000 for 2.0 TRMake: Voltas, Hitachi, Carrier, Bluestar |
| 359 | 48-seats Motionchair 5D TheaterMotionchair™basehavingfoursportsracingseats comprisingaFRPshellwithdetachablecushioning and cover. A footrest along with grab handles enableridersto‘anchor’themselvesintheseat. Control gear and pneumatic equipment are installed under the seat and accessible by removable panels. The separate pneumatic circuits for motion and SFX eachincorporatesapressureregulatorandmicron filter.All pneumaticequipmentisofreputed international company make. Motionchair™ consists of 12 nos. of bases having 4 seats each, i.e. total 48 nos. of seats. Make: Premierworld |
| 360 | Special effects consisting of: wind machine (4 nos.), smokemachine(4nos.),bubblemachines(4nos.), strobes (4 nos.), snow (4 nos.) |
| 361 | Low noise, vibration less, high efficiency Atlas Copco/Elgiorequivalentscrewcompressorin compact housing/construction with air receiving tankandcontrolsplusoilandmoistureseparator, micronfilter,activecarbonfilter(refrigerated)air dryer (in separate enclosure) - Capacity: 1 nos. 20HP |
| 362 | Powerful surround system matching Dolby 5.1 (speakersat5locations+subwoofer(s).Sound software will create 5.1 matrix from standard stereo video source. (If video source is Dolby Digital, Dolby Pro Logic II or Dolby Surround etc then discrete 5.1 sound is played.Output therefore depends on video source).Total2300WRMSamplifier,2nos.main speakers, 1 nos. centre speakers, 2 nos. rear speakers and 2 nos. sub woofer. Make: amplifiers - CROWN/QSC/Yamaha/Soundstandard.Speakers-PAudio drivers in custom enclosure/Ahuja |
| 363 | DYNAMICVISION™3Dviewingsystemspecially designed for virtual reality theatres giving immersive experience when specially made or suitable 3D films areprojected.Screensize:7mx4.4m.Makeof screen: Harkness Hall of UK |
| 364 | Projectorof 8,000 lumens minimum. Manufacturer willbeoneofthefollowingmakes: Panasonic/Epson/Hitachi/BenQ |
| 365 | 3DSpecs,make:Fromreputedcompaniesin USA/Europe |
| 366 | 3D ride films which are in public domain |
| 367 | Supplying and installing pneumatic supply pipe network, supplying and installing control cable, electrical,cabling,in-theatreSFXandinstallationofMotionchairs |
| 368 | COST OF WOODEN BRIDGE |
| 369 | COST OF WOODEN GAZEEBO (Size - 2.0 x 2.0 mt.) |
| 370 | COST OF ARTIFACTS & SCULPTURES |
| 371 | COST OF STONE CAVED MAPSOF THE PARK PLAN |
| 372 | COST OF DOUBLE ARC SWING |
| 373 | COST OF STANDARD SEE SAW |
| 374 | COST OF V.I.P. BENCH |
| 375 | COST OF DUSTBINS |
| 376 | COST OF CRYSTAL MAZE |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
