|
| 1 | Taking out Jhaw/Eucalyptus piles from river bed or from elsewhere including carrying, stacking materials in the nearest stack yard.Above 17.5 cm. and up to 25 cm. diameter |
| 2 | Labour charges for taking out old wood work including cutting bolts and nuts and stacking within a lead of 100metre etc.complete as pe rthe direction of the Engineer-in-charge.(The quantum should be corrected upto 3 decimels) |
| 3 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. |
| 4 | 20.00cm av. Diameter |
| 5 | 17.50 cm av. Diameter |
| 6 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. |
| 7 | 20.00 cm av. Diameter |
| 8 | 17.50 cm av. Diameter |
| 9 | Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in- charge.Hard Wood (Mahua/Arjun/Tentul etc or similarquality hard wood as approved by the Engineer-in-charge) |
| 10 | Supplying, fitting and fixing with iron nails halfsplit bullah wailing pieces and cross pieces etc.complete with cost of all materials andcarriage to site |
| 11 | Width of thinner end above 10 cm. and less than 15 cm. |
| 12 | Jhaw / Eucalyptus |
| 13 | Coal tarring with 5% pitch including cost ofmaterial and labour complete as per direction of the Engineer-in-charge |
| 14 | Two Coat |
| 15 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. |
| 16 | Painting on steel or other metal surface with any approved bituminous anticorrosive paint after preparing the surface including removing paints, cleaning, smoothening etc. including scaffolding where necessary including cost of all materials complete. |
| 17 | Supplying,dressingandstackingatsitebamboopinsabove5cm. diameterandupto7.5 cm. diameter.(Dia. to bemeasuredatmid length). |
| 18 | Driving bamboo pins in standing or flowing waterincluding scaffoldingand driving appliances. |
| 19 | Where boats are not necessary. |
| 20 | Supplying,dressingandstackingatsitebamboopinsabove5cm. diameterandupto7.5 cm. diameter.(Dia. to bemeasuredatmid length). |
| 21 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). |
| 22 | Labourchargesforfillingemptycementgunnybag/polythenebag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a leadof 30 metreas perdirectionofEngr-in-charge(costis excluding the cost of any types of filling materials).NB:-Volume of earth/ sand filledbagsshould notbe lessthan0.028 cum/ bag. |
| 23 | Supplying at site and fitting & fixing Mild Steel long nuts & bolts etc.complete as per the direction of the Engineer-in-charge. |
| 24 | Drilling holes of requisite diameter in R.S. joists channels, tees.Plates etc. |
| 25 | Dia. Upto 12mm and depth upto 10 mm. |
| 26 | Earthwork from borrowpits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30metre and lift of 1.50metre including breaking clods and depositing the same in layers not exceeding 25cm. and rough dressing etc.complete as per profile. |
| 27 | Extrarate over Item Nos. For all kinds of soil for every additional lead of 30metres or part there of beyond the initial lead of 30metres. |
