Tender For New 11 Kv And Lt Line And Additional Dt Work Under Nagar Nikay Under Ee, Edd, Fatehpur Barabanki - Safe Loading, Carriage Including Unloading And Proper Stacking Of Following Materials From Central Store Barabanki / Je Store To Site Of Work. , fatehpur-Uttar Pradesh

Tender For New 11 KV and LT Line and Additional DT Work Under Nagar Nikay Under EE, EDD, Fatehpur Barabanki - Safe loading, carriage including unloading and proper stacking of following materials from Central Store Barabanki / JE Store to site of work. 2 PCC pole 8.5 met. Long. 3 STP POLE 11 Mtr 4 STP POLE 13 Mtr 5 Top Channel. 6 Dropper 7 T-off channel. 8 S/S base angel. 9 11KV disc insulator 10 11KV pin insulator ploymeric 11 ACSR Rabbit conductor. 12 Stay set complete. 13 Earthing Set. 14 Loop Insulator 15 11 kv x-arm. 16 11KV X-arm holding clamp 17 F-bracket. 18 ABC (3X120+1X95+1x16) 19 ABC (3X95+1X70+1x16) 20 M.S. Angle Iron 65x65x6mm Bracing with 4 Clamp 21 Sackle Insulater 22 11KV XLPE CABLE 3X120 MMSQ 23 O/D 3X120 XLPE 24 STH 3X120 25 GI wire 6/10 no. SWG 26 25 KVA T/F NEW 27 63 KVA T/F NEW 28 250KVA T/F NEW 29 100KVA T/F NEW 30 3 Phase DB box 31 Dragging of pole from JE Dump Store to site 32 Grouting of PCC/STP Pole 33 Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting. 34 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line mountingprovinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) 35 Mounting of 25 KVA Tranformer 36 Mounting of 63 KVA Tranformer 37 Mounting of 100 KVA Tranformer 38 Mounting of 250 KVA Tranformer 39 Stringing and sagging of 11 KV line with ACSR Rabbit Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department) 40 Errectionof Substation type double pole with ST/PCCincluding mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM. 41 Errectionof singlePCC /ST Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 42 Stringing and sagging of 3X120+1X95+1x16) & (3X95+1X70+1x16) Sqmm ABC (ABC Cable will be provided by the department) 43 Laying of 11 KV XLPE CABLE 3x120 Sq. MM (XLPE Cable will be provided by the department) 44 Earthing of pole with MS Earthing. 45 Concreating and pilinthing of ST& PCCPole 18x24 CM. 46 Fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel sub station base angle etc. 47 Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. 48 Nut & Bolt 49 LT Clamp 50 PIERCING CLAMP 51 DEAD END 52 COPPER LEAD 70 SQMM FOR DB BOX 53 Gaurding Channel with clamp 54 CLAMP FOR TOP, T-OFF, DROP 55 Danger Board with Clamp 56 DB BOX CLAMP 57 TREE CUTTING 58 MCCB 59 F-Bracket 60 G.I. BARBED WIRE 61 GI Pipe 6 Dia 62 J-Hook 63 Wiremesh fencing of 11/0.4 KV substation shall be made rectangular off size as per site requirement not exceeding 3 meter fabrication 45x45x5mm angle. material shall be supplied by the contractor. 64 Construction of massionary type transformer plinth of Suitable sizewith brick ,cement, coarse sand , sand & brick ballast. Filling of sand in the hollow space , plastering , outer surface in ration 1:4:6 top of the plinth 4 thickness grouting of 2 nos MS Channel of size 100x50x2000 mm on the top of the plinth for placement of transformer . All material shall be supplied by the contractor. 65 Earthing of T/F Pipe type with 40 fit deep borring and providing GI Pipe 1.5 dia (60 fit GI Pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI Pipe Cap. All material shall be supplied by the contractor. 66 Tailless Unit Complete

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	01-05-2025	DATED IS EXTEND	Date	05-05-2025
2	02-04-2025	DATE IS EXTEND	Date	05-04-2025
3	05-04-2025	DATED IS EXTENDED	Date	08-04-2025
4	05-05-2025	DATED IS EXTENDEDS	Date	09-05-2025
5	09-04-2025	DATE IS EXTENDINGS	Date	15-04-2025
6	09-05-2025	DATE EXTENSION	Date	14-05-2025
7	14-05-2025	DATE EXTENDED	Date	19-05-2025
8	15-04-2025	DATE IS EXTENDEDS	Date	18-04-2025
9	18-03-2025	DATED EXTENSION	Date	22-03-2025
10	19-04-2025	DATE IS EXTENDEDSS	Date	21-04-2025
11	19-05-2025	DATED IS EXTENSION	Date	23-05-2025
12	22-03-2025	DATED EXTENSIONS	Date	27-03-2025
13	22-04-2025	DATE EXTENDEDD	Date	26-04-2025
14	23-05-2025	DATES IS EXTENDED	Date	27-05-2025
15	26-04-2025	DATE ISS EXTENDs	Date	30-04-2025
16	27-03-2025	DATEDD EXTENSION	Date	01-04-2025
17	27-05-2025	DATES IS EXTENDEDS	Date	02-06-2025

INR 3540 /-

INR 20000.0 /-

INR 19.34 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB