|
| 1 | SUB ESTIMATE NO.1 R.C.C.WELL(5.0mX10m) |
| 2 | Item No.1:-Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulder in wet or dry condition for head work I.e. intake well, connecting pipe, Jack well, pump house, supply well, etc. for lift 0 to 1.50 M and lead of 150 m including baricating, guarding,disposing off surplus excavated stuff within a redius of of 0.50 km. as directed by Engineer in chrge, etc. complate excluding refilling. |
| 3 | .Lift 0.00to 1.50 M |
| 4 | .Lift 1.50to 3.00 M |
| 5 | .Lift 3.00to 4.50 M |
| 6 | Item No.2:-Excavationin general in hardmaterial comprisingofsoftrock,hard rock,Manjara rock, etc, byblasting / controlledblasting/chisellingas required inwet ordryconditionforHeadWorksi.e.IntakeWell, Connecting Pipe,JackWell,PumpHouse,SupplyWell,etc.for lift 0to1.5Mandlead of 150M including baricading, guarding, disposingoff surplusexcavated stuff within aradiusof 0.5km. asdirectedby Engineer-in-charge, excluding refilling. |
| 7 | Lift 4.50to 6.00 M |
| 8 | Lift 6.00to 7.50.00 M |
| 9 | Lift 7.50to 9.00.00 M |
| 10 | Lift 9.00to 10.00 M |
| 11 | Item No.3:-Dewatering the excavated trenchesand pools of water in building trenches / pipe line trenches, well works by using pumps and other divices including disposing off water to safe distance as directed by Engineer-in charge(including cost of machinery, labor, fuel) etc complete(77+10%For hilly area) |
| 12 | Item No 4-Providing and laying in situ following grades. of cc of trap metal for foundation and bedding including dewatering, formwork, compacting and curing finishing etc complete. |
| 13 | p.c.c M-150 |
| 14 | Item No 5. Providing and casting in situ C.C. of trap/ granite/quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and design or as directed by Engineer in charge including normal dewatering cendering, formwork compaction finishing the formed surface with CM 13 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc complete (By weigh batching and mis design for M-250 and M -300 only Use of L & T, ACC. Ambuja, Birta Gold, Manikgad, Rajashree, etc cement is permitted (excluding MS or Tor reinforcement) |
| 15 | M-200 Beam |
| 16 | M-200 Pardies |
| 17 | Item No 6. Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies staircases, newels, chajjas, Intels, pardies, canopies, fins, arches, etc as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc.complete. (including cost of binding wire) |
| 18 | Item No.7 Refilling in plinth with soft material first over pipe line and then hard material in 15 cm layers with all leads and lifts including plinth with available excavated stuff! consolidation surcharging, etc complete. |
| 19 | Item No 8. Providing and fixing 80 mm dia AC/PVC pipe weep holes at 1.5 M c/c staggered including cost of all materials and labour involved with all leads and lifts,etc complete. |
| 20 | Item no 9 Providing and fixing in position CI Dhapuri steps or 22 mm dia M S bar step with proper anchorage, etc and providing and applying 3 coats of anticorrosive paint, etc complete as directed by engineer in charge |
| 21 | Item no 10 providing structural steel work in single stanchions composed of RSJ, channels etc with caros bases mild steel plates angles brackets etc. |
| 22 | Item No. 11 Providing and fixing Name Board of size 1.00 mx 0.50 m of Gi sheet including angle frame, painting etc complete. As directed Engineer-in-charge |
| 23 | Market Rate |
| 24 | Add 18% GST |
