Tender For Road Safety Work At 01 Intersection And 05 T-Junctions Falling On Jamunabagh Balrai Via Dharwar (Other District Road) Under The Block In Etawah District
Tender Value
13.20 Lakhs
Estimated cost
Bid Submission
18 Mar 2025
0 days left
EMD
1.32 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaswantnagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Road Safety Work At 01 Intersection And 05 T-Junctions Falling On Jamunabagh Balrai Via Dharwar (Other District Road) Under The Block In Etawah District
BOQ
| Sl. No. | Item Description |
| 1 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 400-2. |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carries of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 3 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 4 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushedaggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5%by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 5 | Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification complete in all respectsAs per ReferencetoMORT&H Specification 507SN. 5.5Rates are including all labour, material, T&P, taxes & labour cess but excluding GST |
| 6 | Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity greade sheeting wide clause 801.3 friced over aluminium sheeting Type-IV 1.5mm thick supprorted on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quoting tender. (a)90cm high octagon (Stop Board) |
| 7 | (b) 90 cm equlateral tringle with definition plate size (20cm x 60cm) Major Road Ahead |
| 8 | (c) Speed Limit Board |
| 9 | (d)90cm high octagon (Stop Board) |
| 10 | (e) 90 cm equlateral tringle with definition plate size (20cm x 60cm) Major Road Ahead |
| 11 | (f) Speed Limit Board |
| 12 | Road marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Provding & Laying of hot applied thermoplastic compound2.5 mm thick including relectorising glass beads @ 250 gms per sqm ares. Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC : 35-2015 The finished surface to be level, uniform and free from streaks and holes. |
| 13 | Road marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated / Tranvers bar)Provding & Laying of hot applied thermoplastic compound5 mm thick including relectorising glass beads @ 500 gms per sqm ares. Thickness of 5mm is exclusive of surface applied glass beads as per IRC : 35-2015 The finished surface to be level, uniform and free from streaks and holes. |
| 14 | Reflective Raised Pavement Markers (Road Studs/Cat Eye)Supply and fixing of relective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylontrite) of HIPS (Hi impact Polystyrene) of acrylonitrile butadiens styrenc (ABS). The marher shall supported a load of 1355 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 35 + 50 to base and ares of each retro- reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road studs should not be less than 100mmx100mmx10mmRPM (without shank) as per ASTM |
AI Tender Summary
Tender Timeline
Mar 11, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 18, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 18, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender