|
| 1 | Designing, constructing and commissioning of closed type raw water intake well (Jack well) of 20.0m inner clear diameter on open foundation including pump house structure of 20.0m inner clear diameter including all necessary arrangement for excavating, coffer dam, concreting of sub structure and super structure etc with all materials and labours in river Yamuna including all necessary surveys as per latest Indian standard for successfully constructing and commissioning of the intake well.Intake well sub structure of the 20.0 m inner shall be closed type in RCC grade M:30 including providing, supplying and fabricating reinforcement as per design and drawing. Construction of necessary coffer dam and its removal is part and parcel of the job. Also include the dismantling and proper disposal of the enabling works after the completion of the construction. Also provide temporary approach to the intake well site and proper working space with full safety of the labour at intake well site.Pump house of 20.0m inner clear diameter and 7.5m height of R.C.C. framed structure shall be constructed above circular wall of the intake well with all types of beams, columns, slabs lintels chhajas. All R.C.C. work above Pump floor level shall be in M-25 for Pump house including providing and fabricating reinforcement, brick work masonary in C.C. 1:6, and outside/Inside cement plaster in C.M. 1:3 shall be finished and smooth with Epoxy Paint. Necessary opening shall be made in Pump house floor for machinery. The pump house shall be well ventilated with windows with grill and Rolling shutter. Providing and errecting (E.O.T.) Electrical operated trolley of min 10 M.T capacity with the gantry including applying paint of approved quality. Construction of intake well shall include all extra charges for hiring equipment, labour, land and necessary enabling works cost. Any Item remains to be mentioned above but required for the work shall be deemed to have been included. |
| 2 | Designing, constructing approach bridge of 6 meter inner clear width and 110.00 meter length shall be constructed as framed structure and shall be constructed on open foundation with bracing beams arrangement, deck slab. Substructure and super structure shall be of grade M-30 R.C.C. Columns, with M-30 grade Beams & Deck slab. For approach bridge min depth of the column footing 3 meter is required on the bank of Ground or as per Design. Inside the river the column has to be supported by well foundation and well cap the invert level of the well foundation shall be at 115 m or based on the strata of the river bed. The scope of work also includes the geo technical investigation and survey of the river bed. The sub structure and super structure of the approach bridge will be done as per detailed design, drawing and specification in cement concrete M-30 including providing, supplying and fabricating reinforcement as per design and drawing. Necessary coffer dam will be provided for the construction of the columns for present water level. Columns will be connected with RCC Beam of suitable size including all materials and labour.It shall be sufficient strong enough to take the load of M.S. pipe with water load, Trolley with dead weight of Pump, Pipes & painting with anticorrosive paint.Accordingly, suitable rail arrangements are to be provided over the deck slab in order to allow movement of Trolley over the rails, Gantry girder with chain pulley block shall be provided on bank end of bridge.Retaining wall of RCC M-30 shall be constructed for resting approach bridge at one end including required reinforcement. The floor R.L.of Pump house as well as approach bridge must be min 1.50 meter higher than H.F.L. of reservoir. The job includes necessary refilling work as per site requirement. The above structure shall be provided with lighting protection devices. Necessary lighting arrangement shall be made for whole structure.Construction approach bridge shall include all extra charges for hiring equipment, labour, land and necessary enabling works cost. Any Item remains to be mentioned above but required for the work shall be deemed to have been included.Construction of intake well shall include all extra charges for hiring equipment, labour, land and necessary enabling works cost. Any Item remains to be mentioned above but required for the work shall be deemed to have been included. |
| 3 | Detailed Geographical and hydrological Survey, Site investigation, Designing, obtaining necessary approvals with Supply of all materials labour ,Tools & plants for Construction ofWater Treatment Plant of 55 MLD capacity Water Treatment Plant with Advanced Treatment Process which comprises of the following unit processes and services:- Inlet work – including flow measurements, fine screening and flow distribution- Biological treatment (MBBR process)- Chemical treatment - Membrane filtration- Disinfection- 2500KL Clear water reservoir - Sludge treatment and water recovery system- Wastewater disposal to river- Water and sludge sampling- Service water and all other required unitsThe base biological process selected for the proposed advanced plant is MBBR system. The process design for MBBR system shall be suitable to reduce BOD and total nitrogen to the acceptable level.Cost include all necessary civil, E&M and SCADA works including all labour, material, equipments,T&P cost etc |
| 4 | Excavation for pipe line in ordinary soil (loam, clay, sand) with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 50 meters. |
| 5 | 0 to 1.5 m depth |
| 6 | 1.5 to 3 m depth |
| 7 | Providing and supplying European Standard EN 639/1994 and EN 641/1994 or AWWA C-303 standard and reinforced concrete pressure pipes cylinder type or IS-15155-2002 (Bar wrapped steel cylinder pipes suitable for overlapping steel welded joint or butt welded steel joints) of following class and diameter including cost of all material and labour required, inspection charges, transportation to stores, transit insurance, loading, unloading and stacking excluding GST levied by GOI & GOM in all respect, etc. complete. |
| 8 | 1100mm dia Bar wrapped steel cylinder pipes |
| 9 | Lowering and laying in position to correct line and level including M. S. specials such as distance pieces, straps, bends, tapers, etc. on pedestals or chairs upon piers or trestles. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and including transportation up to 500 m. etc. complete as specified. rate also inclusive of Hydraulic Testing |
| 10 | 1100mm dia Bar wrapped steel cylinder pipes |
| 11 | Dismantling of following type of road surfaces for laying of pipe line and house connection work including sorting out of serviceable materials and disposal of unserviceable materials including supply of all materials, labour, T&P etc. required for proper completion of the work.The rates of dismantling of roads as mentioned below for different types of roads include the cutting of existing thickness of road either single or multiple layer of roads. No extra payment shall be made to the contractor for cutting multiple layers of roads. |
| 12 | Bituminious Road |
| 13 | Cement Concrete Road |
| 14 | Interlocking Tiles Road |
| 15 | Re-instatement of following type of road surfaces after laying of pipe line and house connection work including supply of all materials, T&P etc. requuired for proper completion of the work as per direction of engineer-in-charge. The quantity of re-instatement has been increased by thirty percent in the view of additional damaged of dismantled road due to traffic / vehicle movement. |
| 16 | Bitumen roadTYPE AConstruction of bitumen road as per UPPWD specification including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-GSB G-1 (One coat) (90-40 mm) = 12.5 cmG -2 (one coat) (45-63 mm) = 7.5 cmG - 3 (one coat) (22.5 - 53 mm) = 7.5 cmBM (One coat)= 7.5 cmSDBC (One coat)= 2.5 cm |
| 17 | Cement Concrete RoadConstruction of Cement Concrete road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:3:6 (cement, coarse sand & stone ballast of 20-40 mm) CC =100 mm, 1:1.5 :3 (cement, coarse sand & stone ballast of 16-20 mm) |
| 18 | C.C. Interlocking Tiles Road Type AConstruction of C.C. Interlocking Tile road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:4:8 (cement, coarse sand & stone ballast of 20-40 mm)Sand= 30mm to 50mm thick local sand lair for preparation of surfaceTiles = 50% new + 50% oldNote : 80 mm thick rubber moulded interlocking tile shall be used for construction of interlocking tile road. |
| 19 | Electrically Operated D.I. D/F Sluice valve, PN 1.6 |
| 20 | 1100mm dia |
| 21 | Double Orifice Air Valve+Isolation Valve |
| 22 | 200mm dia |
| 23 | Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge. |
| 24 | D.I. D/F Sluice valve, Manually Operated / Electrically Operated PN 1.6 |
| 25 | 1100mm dia |
| 26 | Air valves, PN 1.6 |
| 27 | 200mm dia |
| 28 | Supply of all materials, labour, T&P etc required for construction of RCC chambers for flow meter with M-30 Cement Concrete as per type design & drawing. as per the directions of Engineer-in- charge. |
| 29 | Flow Meter Valve RCC Chambers |
| 30 | 1100mm dia to 1200mm dia Flow Meter (SIZE - 3.8 x 3.0 x 3.6 m) |
| 31 | Sluice valve RCC Chamber |
| 32 | 1100mm dia Sluice valve (Size- 2.8x 2.7x 3.7m) |
| 33 | Air valve RCC Chambers |
| 34 | 80mm to 200mm dia Air valve (Size- 1.2x 1.0x 2.4m) |
| 35 | Disposal of surplus earth /unserviceable material, by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. |
| 36 | Providing and laying in position reinforced cement concrete (mix 1:2:4) for construction of thurst block at bends of feeder main, rising main & distribution system including batching, mixing, placing, vibrating, curing, formwork, finishing,including cost ofall material and labor, tools and plants required with transportation, loading, unloading,etc., complete for all leads and lifts etc required for proper completion of the work. |
| 37 | Providing H.Y.S.D steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, hooking, placing in position, lapping and/ or welding wherever required, tying with binding wire and anchoring to the adjoining member wherever necessary as per design, including cost of materials and labor complete as per drawings. |
| 38 | Providing, fabricating and fixing expansion joints for pipelines as per the drawing. The rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, Rate includes plates and flats required for expansion joint and all other materials such as synthetic rubber, rubber ring, etc. including packing as per specifications, grease, bolts and nuts, local handling, excluding GST levied by GOI & GOM in all respect etc. complete. |
| 39 | Construction of Boundry wallaround WTP Campus as per unit estimate with RCC Columns @ 3.0m c/c distance with plinth beam and brick work in 1:4 as per type design & drawing including supply of all materials T& P etc complete |
| 40 | Supply and fixing 3.60 m wide MS main gate & 1.0 m wide a wicket gate with RCC Columns as per type design & drawing including primer and painting, meterial, labour, T&P etc all complete. |
| 41 | Providing and laying in position reinforced cement concrete (mix 1:2:4) for construction of drain, size 250 mm x 250 mm, over PCC 1:4:8, including batching, mixing, placing, vibrating, curing, formwork, finishing,including cost ofall material and labor, tools and plants required with transportation, steel,loading, unloading,etc., complete for all leads and liftsand as per specifications etc required for proper completion of the work. |
| 42 | Construction of following types of Road/ flooring for development of WTP Campus required as per site condition |
| 43 | Bitumen roadTYPE AConstruction of bitumen road as per UPPWD specification including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-GSB G-1 (One coat) (90-40 mm) = 12.5 cmG -2 (one coat) (45-63 mm) = 7.5 cmG - 3 (one coat) (22.5 - 53 mm) = 7.5 cmBM (One coat)= 7.5 cmSDBC (One coat)= 2.5 cm |
| 44 | C.C. Interlocking Tiles Road Construction of C.C. Interlocking Tile road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:4:8 (cement, coarse sand & stone ballast of 20-40 mm)Sand= 50 mm thick local sand lair for preparation of surfaceTiles = 100% new Note : 100 mm thick rubber moulded interlocking tile shall be used for construction of interlocking tile road. |
| 45 | Construction of 1 set of double storey residentialStaff Quarter (RCC framed structure)for providing of 4 no of staff quarters. There shall be two staff quarter at each floor (2GF+2FF). The plinth area of one staff quarter shall be min. 57.706 sqm. The total plinth area of each floor shall be minimum 115.412 sqm. (2x 57.706 sqm each) excluding area of common stair case but inclusive it\"s called in rates provided. The sum of total plinth area of one set of double storey building residential quarter shall be 2x115.412 = 230.824 sqm.The cost of construction of 1 set of double storey residentialStaff Quarterincludessupply of all materials, labour, T&P etc. required for proper completion of the work including supply ofstructural design and drawing, as per the directions of Engineer-in- charge. |
| 46 | Construction of single storey residentialStaff Quarter (RCC framed structure)for providing of 2 no of staff quarters. The plinth area of one staff quarter shall be min. 57.706 sqm. The total plinth area of floor shall be minimum 115.412 sqm. (2x 57.706 sqm each) excluding area of common stair case but inclusive it\"s called in rates provided. The cost of construction of 1 set of single storey residentialStaff Quarterincludessupply of all materials, labour, T&P etc. required for proper completion of the work including supply ofstructural design and drawing, as per the directions of Engineer-in- charge. |
| 47 | E&M Works |
| 48 | Raw Water Pumping Station on Jackwell |
| 49 | Providing, erecting, commissioning and giving test and trial of VT pump set , water lubricated type and having following duty point,operating speed including providing and fixing ISMB grating etc including Suppy and delivery of Vertical hollow /solid shaft squirrel gauge induction motor (IS 325) suitable for the above pumps continuous rated TEFC/ SPDP type with class F insulation for operation in AC 3-phase/ 50Hz (+/- 5%), 415 volt (+/- 10%)running with the speed of pump noted above and with inbuilt thrust bearing assembly capable of taking of the entire load and non reverse ratchet assembly etc complete. The motor rating noted above is the minimum and shall be such that it should never be overloaded when the pump works at the MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficient to have maximum efficiency at high powerfactor. Separate thrust bearing assembly could also be supplied to takeup the down load. 1500 RPM as per detailed specifications. |
| 50 | Raw Water Pump - Q=342.19LPSH=30mwith suitable motor HP |
| 51 | Supply of double flangedDI short body pattern butterfly valvewith electrical actuator having integal starter and related hardware, including chair support, etc., conforming to IS 13095/BS EN 593, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . |
| 52 | Raw Water Pump - 600 mm |
| 53 | Supply of double flanged, DI, short body sluice valves with electrical actuator having integal starter and related hardware conforming to IS 14846, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . |
| 54 | Commonl Header - 1000 mm |
| 55 | Indivisual Header - 600 mm |
| 56 | Supply of flanged DI Kinetic air valve including isolated sluice valve and related hardware conforming to IS 14845 / C512, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications. |
| 57 | Common Header |
| 58 | Raw Water Pump - 200 mm |
| 59 | Supply of dismantling joints and related hardware, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . |
| 60 | Individual Header, mm |
| 61 | Raw Water Pump - 600 mm |
| 62 | Commonl Header, mm |
| 63 | Raw Water Pump - 1000 mm |
| 64 | Providing and supplying ISI mark DI D/F reflux valves (non-returnvalves ) of following dia including all railway freight, inspection chargesunloding from railway wagon,loading into truck, transportation upto departmental stroes/ site,unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I(1984). |
| 65 | Pumping Main |
| 66 | Raw Water Pump - 600 mm |
| 67 | Providing, errecting, commissioning and testing of non clog sump pump set havingpump discharge capacity of 30 LPS raw water with silt and mid at a total head of 30m with piping and other necessary arrangements. |
| 68 | Q=30LPS, H=30m with suitable motor HP |
| 69 | Providing, fabricating, testing, transporting, and handling mild steelpipes and bendsas per IS 5504, IS 3589 and the specifications and drawings.The rate to include transportation of pipes to site, loading, unloading, storage, guarding, and issuance to works as per specifications. The rates shall be inclusive of Collecting materials from storage, loading, transporting, unloading, laying and jointing/welding pipe connections to correct line and level as per the specifications and drawings.The rate to includehoisting, lowering, marginal cutting wherever necessary, assembling, providing supports, thrust blocks, anchor blocks etc., as per specifications and drawings.The rate also includes testing of field joints . The rate shall also inclusive of internal and external epoxy coating and lining for corrosion protections as specified in the Specifications. |
| 70 | Indivisual Header, mm |
| 71 | Raw Water Pump - 600 mm |
| 72 | Commonl Header, mm |
| 73 | Raw Water Pump - 1000 mm |
| 74 | Supply and errection of new Electrical Operated Crane (EOT) with chain pulley block complete10 T and Above 8 m upto 10 m span |
| 75 | Providing and supplying ISI mark Electromagnetic Flow meter of following dia including all railway freight, inspection charges unloading from railway wagon, loading into truck, transportation up to departmental stores / site, unloading, stacking etc. complete. |
| 76 | Commonl Header |
| 77 | Raw Water Pump - 1000 mm or suitable as per actual requirement. |
| 78 | Spetials, fittings,Pressure gauge, Saddle,Nuts Bolts washers etc, cost, Work includes making connection with existing pipes etc |
| 79 | Raw Water Pump |
| 80 | E&I Worksfor Transyamuna Raw Water Pumping Station |
| 81 | Electrical System |
| 82 | Design, Supply, Installation, Testing and Commissioning of oil immersedOutdoor type Power distribution transformer 33/0.433 KV rating 1000 KVA double wound with copperwinding, ONAN with onload tap changer operated for voltage variation + 10.0 % to - 10%in step of 1.25%with their RTCC panel alongwith marshalling box, WTI, OTI, Buchholz relay etc conforming to releavent Indian Standardscomplete with standard fitting & accessories complete in all respect atB-1, Trans Yamuna CWR Pumping Station |
| 83 | Design, Supply, Installation, Testing and Commissioning of 33 kV indoor HT Panel as per approved single line diagram at Both pumping Stations |
| 84 | Design, Supply, Installation, Testing and Commissioning of 110V Ni-Cd battery, battery charger & DC distribution board and accessories |
| 85 | Design, Supply, Installation, Testing and Commissioning of 415 V, Indoor Switch board PMCC panel (including 5 soft starters, Lighting and Power arrangements) atPumping Station |
| 86 | Design, Supply, Installation, Testing and Commissioning of 415 V, APFC panel of suitable rating complete with required APFC relay and capacitor bank complete. |
| 87 | Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - external lighting |
| 88 | Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, utility sockets (3ph and 1ph.) and necessary accessories - internal lighting |
| 89 | Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories |
| 90 | Complete cabling system with HV Power cables,cable trays, route marker, steel structure for cable trench, pipes and accessories |
| 91 | Complete cabling system with LV power and control cables, cable trays, route marker, steel structure for cable trench, pipes and accessories |
| 92 | Start stopPush Button Stations |
| 93 | AUTOMATION WORKS: Installation of Instrumentation and Control Equipment including, but not limited to, safe storage, protection, civil works, erection, installation, testing and commissioning required to complete the Works in all respects for the following equipment:Transyamuna Raw Water Pumping Station |
| 94 | CE & UL approved manufacturer\"s RTU/PLC suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified for each tubewell & CWR to store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification sheet including Control panel with IP 54 protection industrial grade for all equipments (Separate for control (24 V) and power equipments) with CE / UL approved manufacturer’s Surge protector for Control Panel and CE / UL approved manufacturer’s 7\" HMItouchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters as specified in tender technical specification sheet . |
| 95 | GSM/GPRS based wireless communicationmodem for RTU/PLC capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant as specified in tender technical specification sheet. |
| 96 | CE / UL Certified 3 KVA UPS with batteries as per specification mentioned in technical bid documents. |
| 97 | CE/UL approved manufacturer\"s Intelligent smart energy meter with memory real time clock and 1 serial port integrated with R.T.U. as per spec mentioned in technical bid documents. |
| 98 | CE / UL approved manufacturer’s Radartype Level Transmitter for CWR as specified in tender technical specification sheet |
| 99 | CE / UL approved manufacturer’s Pressure Transmitterin indivisual delivery line as well main header line of Pump as per specifications specified in tender technical specification sheet. |
| 100 | CE/UL surge protector for control panel |
| 101 | CE/UL Certified 7\" HMI Touchscreen suitable to commuticate with PLC / RTU for loac display and control of process parameter. |
| 102 | Completecontrol cable of all equipments at ZPS |
| 103 | Control Panel with IP54 protection Indsutrial grade for all equipmets seprate for control (24 Volt) and power equipment. |
| 104 | Complete instrumentation earthing system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories |
| 105 | Security Surveillance IP Camera with Recorer |
| 106 | Instaallation, Testing & Commissioning |
| 107 | Trial Run for 3 Month |
| 108 | Clear Water Pumping Station at WTP |
| 109 | Providing, erecting, commissioning and giving test and trial of VT pump set , water lubricated type and having following duty point,operating speed including providing and fixing ISMB grating etc including Suppy and delivery of Vertical hollow /solid shaft squirrel gauge induction motor (IS 325) suitable for the above pumps continuous rated TEFC/ SPDP type with class F insulation for operation in AC 3-phase/ 50Hz (+/- 5%), 415 volt (+/- 10%)running with the speed of pump noted above and with inbuilt thrust bearing assembly capable of taking of the entire load and non reverse ratchet assembly etc complete. The motor rating noted above is the minimum and shall be such that it should never be overloaded when the pump works at the MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficient to have maximum efficiency at high powerfactor. Separate thrust bearing assembly could also be supplied to takeup the down load. 1500 RPM, as per detailed specifications. |
| 110 | Tedi Baghiya FM Pump : - Q=95.4LPSH=17mwith suitable motor HP |
| 111 | Etmadpur FM Pump : - Q=81.3LPSH=62mwith suitable motor HP |
| 112 | Transyamuna-I & II FM Pump :- Q=210.6LPSH=17m with suitable motor HP |
| 113 | Supply of double flangedDI short body pattern butterfly valvewith electrical actuator having integal starter and related hardware, including chair support, etc., conforming to IS 13095/BS EN 593, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . |
| 114 | Tedi Baghiya FM Pump : - 400 mm |
| 115 | Etmadpur FM Pump :- 250 mm |
| 116 | Transyamuna-I & II FM Pump : - 400 mm |
| 117 | Supply of double flanged, DI, short body sluice valves with electrical actuator having integal starter and related hardware conforming to IS 14846, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . |
| 118 | Commonl Header, mm |
| 119 | Tedi Baghiya FM Pump : - 500 mm |
| 120 | Etmadpur FM Pump : - 300 mm |
| 121 | Transyamuna-I & II FM Pump :- 800 mm |
| 122 | Supply of flanged DI Kinetic air valve including isolated sluice valve and related hardware conforming to IS 14845 / C512, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . |
| 123 | Commonl Header |
| 124 | Tedi Baghiya FM Pump :- 100 mm |
| 125 | Etmadpur FM Pump :- 100 mm |
| 126 | Transyamuna-I & II FM Pump :- 200 mm |
| 127 | Supply of dismantling joints and related hardware, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . |
| 128 | Individual Header, mm |
| 129 | Tedi Baghiya FM Pump :- 400 mm |
| 130 | Etmadpur FM Pump :- 250 mm |
| 131 | Transyamuna-I & II FM Pump :- 400 mm |
| 132 | Commonl Header, mm |
| 133 | Tedi Baghiya FM Pump :- 500 mm |
| 134 | Etmadpur FM Pump :- 300 mm |
| 135 | Transyamuna-I & II FM Pump :- 800 mm |
| 136 | Providing and supplying ISI mark DI D/F reflux valves (non-returnvalves ) of following dia including all railway freight, inspection chargesunloding from railway wagon,loading into truck, transportation upto departmental stroes/ site,unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I(1984). |
| 137 | Pumping Main |
| 138 | Tedi Baghiya FM Pump :- 400 mm |
| 139 | Etmadpur FM Pump :- 250 mm |
| 140 | Transyamuna-I & II FM Pump :- 400 mm |
| 141 | Providing, errecting, commissioning and testing of non clog sump pump set havingpump discharge capacity of 30 LPS raw water with silt and mid at a total head of 30m with piping and other necessary arrangements. |
| 142 | Q=30LPS, H=30m with suitable motor HP |
| 143 | Providing, fabricating, testing, transporting, and handling mild steelpipes and bendsas per IS 5504, IS 3589 and the specifications and drawings.The rate to include transportation of pipes to site, loading, unloading, storage, guarding, and issuance to works as per specifications. The rates shall be inclusive of Collecting materials from storage, loading, transporting, unloading, laying and jointing/welding pipe connections to correct line and level as per the specifications and drawings.The rate to includehoisting, lowering, marginal cutting wherever necessary, assembling, providing supports, thrust blocks, anchor blocks etc., as per specifications and drawings.The rate also includes testing of field joints . The rate shall also inclusive of internal and external epoxy coating and lining for corrosion protections as specified in the Specifications. |
| 144 | Indivisual Header, mm |
| 145 | Tedi Baghiya FM Pump :- 400 mm |
| 146 | Etmadpur FM Pump :- 250 mm |
| 147 | Transyamuna-I & II FM Pump :- 400 mm |
| 148 | Commonl Header, mm |
| 149 | Tedi Baghiya FM Pump - 500 mm |
| 150 | Etmadpur FM Pump - 300 mm |
| 151 | Transyamuna-I & II FM Pump - 800 mm |
| 152 | Supply and errection of new Electrical Operated Crane (EOT) with chain pulley block complete.10 T and Above 8 m upto 10 m span |
| 153 | Providing and supplying ISI mark Electromagnetic Flow meter of following dia including all railway freight, inspection charges unloading from railway wagon, loading into truck, transportation up to departmental stores / site, unloading, stacking etc. complete. |
| 154 | On feeder Main |
| 155 | Tedi Baghiya Feeder Main - 500 mm |
| 156 | Etmadpur Feeder Main |
| 157 | CWR WTPto Junction-1 (TY Zone-2) - 500 mm |
| 158 | Junction-1 to Nauki Sarai Ex. CWR (TY Zone-2) - 350 mm |
| 159 | Junction-1 to Junction-2 (TY Zone-2) - 400 mm |
| 160 | Junction-2 to Chhalesar CWR (TY Zone-2) - 350 mm |
| 161 | Junction-2 to Etmadpur CWR (Etmadpur Nagar Palika Parishad) - 300 mm |
| 162 | Trans Yamuna-I&II Feeder Main |
| 163 | CWR WTPto Junction-1 (TY Zone-2) - 1000 mm |
| 164 | Junction-1 to Kalandi Vihar CWR (TY Zone-2) - 500 mm |
| 165 | Junction-1 to Junction-2 (TY Zone-1) - 900 mm |
| 166 | Junction-2to Sita Nagar CWR (TY Zone-1) - 500 mm |
| 167 | Junction-2to Prakash Nagar CWR (TY Zone-1) - 700 mm |
| 168 | Spetials, fittings,Pressure gauge, Saddle,Nuts Bolts washers etc, cost, Work includes making connection with existing pipes etc |
| 169 | Tedi Baghiya FM Pump |
| 170 | Etmadpur FM Pump |
| 171 | Transyamuna-I & II FM Pump |
| 172 | E&I Worksfor TransyamunaCWR Pumping Station at WTP |
| 173 | Electrical System |
| 174 | Design, Supply, Installation, Testing and Commissioning of oil immersedOutdoor type Power distribution transformer 33/0.433 KV rating 2500 KVA double wound with copperwinding, ONAN with onload tap changer operated for voltage variation + 10.0 % to - 10%in step of 1.25%with their RTCC panel alongwith marshalling box, WTI, OTI, Buchholz relay etc conforming to releavent Indian Standardscomplete with standard fitting & accessories complete in all respect atB-1, Trans Yamuna CWR Pumping Station |
| 175 | Design, Supply, Installation, Testing and Commissioning of 33 kV indoor HT Panel as per approved single line diagram at Both pumping Stations |
| 176 | Design, Supply, Installation, Testing and Commissioning of 110V Ni-Cd battery, battery charger & DC distribution board and accessories |
| 177 | Design, Supply, Installation, Testing and Commissioning of 415 V, Indoor Switch board PMCC panel (including 13 soft starters, Lighting and Power arrangements) atPumping Station |
| 178 | Design, Supply, Installation, Testing and Commissioning of 415 V, APFC panel of suitable rating complete with required APFC relay and capacitor bank complete. |
| 179 | Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - external lighting |
| 180 | Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, utility sockets (3ph and 1ph.) and necessary accessories - internal lighting |
| 181 | Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories |
| 182 | Complete cabling system with HV Power cables,cable trays, route marker, steel structure for cable trench, pipes and accessories |
| 183 | Complete cabling system with LV power and control cables, cable trays, route marker, steel structure for cable trench, pipes and accessories |
| 184 | Start stopPush Button Stations |
