Tender For Repairing And Cleaning Of Coagulation Tank Reservoir Tank Bleaching House , Filter House, Over Head Tanks, Pipe Lines Pits And Other Connected Works In Side Factory Perimeter And Edk Area At Ofk.
Tender Value
20.36 Lakhs
Estimated cost
Bid Submission
31 Mar 2025
0 days left
EMD
40735
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khamaria → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing And Cleaning Of Coagulation Tank Reservoir Tank Bleaching House , Filter House, Over Head Tanks, Pipe Lines Pits And Other Connected Works In Side Factory Perimeter And Edk Area At Ofk.
BOQ
| Sl. No. | Item Description |
| 1 | Dewatering (for desilting) in chamber with connected Channel system of Coagulation Tanks having Capacity 3 lakh Gallon Approximate & Depth upto 5.50 M approx. in filter Houseincludingall necessary temporary arrangements with required tools, plants & manpower etc. As directed by Engineer-in-charge. |
| 2 | Dewatering (for desilting) in reservoir tankshaving Capacity 5 lakh Gallon Approximate & Depth upto 5.50 M approx. in filter House includingall necessary temporary arrangements with required tools, plants & manpower etc. As directed by Engineer-in-charge. |
| 3 | Dewatering (for desilting) in reservoir tanks having Capacity Approx. 1.5 lakh Gallon& Depth upto 5.5 M Approx.in filter Houseincludingall necessary temporary arrangements with required tools, plants & manpower etc. As directed by Engineer-in-charge. |
| 4 | Uprooting the shrubs, herbs and any types of trees/plantsfrom Coagulation tank with connected channels, reservoir tank and other under ground sumps/tanks ( depth upto 5.5m approx.) includingall necessary temporary arrangements with required tools, plants & manpower etcand applying acid to these area including washing, rubbing down and Cleaning Complete remove silt, scale, mud and dirt etc with bleaching powder then clean & washout with clean waterand making surface good with 1:4 cement mortar. As directed by Engineer-in-charge. |
| 5 | Cleaning of existing Over Head Tanks (Height approximate 15m from ground level) includingall necessary temporary arrangements with required tools, plants & manpower etc.Complete removal of silt, scale, dirt etc with bleaching powder then clean & washout with clean water. As directed by Engineer-in-charge. |
| 6 | Supplied only 100mm cast iron pipes with spigot and socket ends. |
| 7 | Cutting chases for cracks in stone concrete block/ wall or where as required not exc. 20cm girth and making good to facing in cement mortar 1:3/cement concrete as directed by Engineer-in-charge. |
| 8 | Taking down old cement plaster/ old treatmentincluding raking out joints, hacking for key, scrubbing down with water and rendering 15 mm thick cement plaster on old brick or concrete surfaces of wall with 1:4 cement mortar and Surface to be finished even and smooth (without using extra cement). |
| 9 | M&L, rendering 15 mm thick cement plaster on new brick or concrete surfaces of wall with 1:4 cement mortar and Surface to be finished even and smooth (without using extra cement). |
| 10 | Complete removal of existing treatment on wall surfaces and applied one coat of primer then two coat of distemper oil emulsionon on outer wall. |
| 11 | Preparation of old wall surface including cracks filling up to 3mmplastered or unplastered brooming down etc and applyone coat of white washing on old decoratedinside wall surface and as directed by Engineer-in-charge. |
| 12 | Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in anyposition. |
| 13 | Demolition ofcement concretein ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 14 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. |
| 15 | M&L, Modular brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in 1:4 cement mortar. |
| 16 | M/L Hardcore of gauge n exc. 63 mm,(Broken Stone or Bolders) deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surface. |
| 17 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm |
| 18 | M/LCement concrete type B- 2, 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete. |
| 19 | M/L, Reinforced cement concrete (design mix) M-30 (20mm gradedaggregates) inFoundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 20 | M/L, Reinforced cement concrete (design mix) M-30 (20mm gradedaggregates) in Walls,retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilastersandbuttresses. |
| 21 | Supplied only Liquid water proofing compound. |
| 22 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation, plinth beams and similar work on rough finished flat surface; vertical or to batter. |
| 23 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work on rough finished flat surface including attached pillasters, buttresses, etc.; vertical or to batter. |
| 24 | Removing building materials etc. to a distance of 100m or under, including loading, unloading and stacking at the destination. As directed by Site-in-charge/Engineer-in-charge. |
| 25 | S&F, TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 26 | Site cleaning on soft/loose soil and as required. |
| 27 | Rough excavation in mud not exceeding1.5 m deep and getting out. Returning, filling of loose/hard soil in trench/excavated area, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 28 | Rough excavation in mud, exc 1.5m and n.exc. 3.00min depth and getting out.Returning, filling of loose/hard soil in trench/excavated area, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 29 | S&F 50 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors/trench including cutting of existing steel tubing in any position. |
| 30 | S&F 80 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors/trenchincluding cutting of existing steel tubing in any position. |
| 31 | S&F 100 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors/trench including cutting of existing steel tubing in any position. |
| 32 | S&F 150 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors/trenchincluding cutting of existing steel tubing in any position. |
| 33 | M&L,Runlead joint for 80mm spigot socketed C.I. pipes in any position. Dismantling cast iron detachable joints and burning out lead joint in any position, including removing old lead to store, etc. as directed by Engineer-in-charge. |
| 34 | M&L, Runlead joint for 150mm spigot socketed C.I. pipes in any position. Dismantling cast iron detachable joints and burning out lead joint in any position, including removing old lead to store, etc. as directed by Engineer-in-charge. |
| 35 | M&L,Runlead joint for 200mm spigot socketed C.I. pipes in any position. Dismantling cast iron detachable joints and burning out lead joint in any position, including removing old lead to store, etc. as directed by Engineer-in-charge. |
| 36 | M&L, cement joint for 100mm spigot socketed cement concrete pipes in any position. Dismantling cement joint of spigot and socket pipesin any position, including removal of any useful materials to store. As directed by Engineer-in-charge. |
| 37 | M&L, cement joint for 150mm spigot socketed cement concrete pipes in any position. Dismantling cement joint of spigot and socket pipesin any position, including removal of any useful materials to store. As directed by Engineer-in-charge. |
| 38 | M&L, cement joint for 200mm spigot socketed concrete pipes in any position. Dismantling cement joint of spigot and socket pipesin any position, including removal of any useful materials to store. As directed by Engineer-in-charge. |
| 39 | M&L, cement joint for 250mm spigot socketed cement concrete pipes in any position. Dismantling cement joint of spigot and socket pipesin any position, including removal of any useful materials to store. As directed by Engineer-in-charge. |
| 40 | M&L, cement joint for 300mm spigot socketed cement concrete pipes in any position. Dismantling cement joint of spigot and socket pipesin any position, including removal of any useful materials to store. As directed by Engineer-in-charge. |
| 41 | S&F, Clamps for water pipes of any size including nut bolts, bands, straps, supports or stays, plate washers and similar small articles for water pipe lines in any position conforming to Fe-290 Gde-E-165. |
| 42 | S&F, Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; ladders; framedbalusters; walk ways; railings; framework of water tanks, pits and similar work conforming to Fe.290.Gde-E-165. |
| 43 | S&F, Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. |
| 44 | S&F, Welded steel wire fabric and complete fixed with wood or steel members, weight N exc 4 kg per square meter. |
| 45 | M&L, 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, shed etc. fixed with L-type or J-type or cranked hook bolts. |
| 46 | Preparation of new steel surface of any description over 10 cm girtth or width not otherwise described and apply one coat of red oxide with two coat of synthetic enamelpaint and as directed by Engineer-in-charge. |
| 47 | Preparation of old steel surface of any description over 10 cm girtth or width not otherwise described and apply one coat of red oxide with two coat of synthetic enamelpaint and as directed by Engineer-in-charge. |
| 48 | Preparation of old steel surface of any description over 10 cm girtth or width not otherwise described and apply one coat of red oxide primer with two coat of Acid resistancepaint and as directed by Engineer-in-charge. |
| 49 | Preparation of old steel surface of any description over 10 cm girtth or width not otherwise described and apply one coat of aluminium red oxide primer with two coat of Aluminiumpaint and as directed by Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Mar 11, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 31, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 01, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender