Tender For Renovation/Retrofitting Of 100 Nos. Of Toilets Inside Factory At Ofk.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
31 Mar 2025
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khamaria → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation/Retrofitting Of 100 Nos. Of Toilets Inside Factory At Ofk.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry built in cement or cement lime mortar, including all quoins, arches, pillars, etc. as per the directives of EIC. |
| 2 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 3 | Rough excavation soft/loose soil not exceeding 1.5 m deep and getting out and Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 4 | M & L, Hardcore (Broken stone or boulders) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface. |
| 5 | M&L, Cement concrete in foundation, filling and mass concretetype B- 2 1:2:4, 40mm graded aggregate. |
| 6 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4. |
| 7 | S&F, Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. |
| 8 | Taking down cement mortar plaster on brickwalls or surface on concreteetc. including raking out joints, hacking for key, scrubbing downwith water, etc. |
| 9 | M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surface , finished even and smoothwithout using exta cement complete all as specified and directed. |
| 10 | M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surface , finished even and smoothwithout using exta cement complete all as specified and directed in ceilings. |
| 11 | M&L, Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 12 | 15mm thick screed bed of 1:4 cement mortar set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 13 | S & F Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 14 | S&F Glazed ceramic coloured tiles (350 x 250 mm) x 7mm OR 450X350X7MMin wall, set and jointed in neat cement slurry and pointed in coloured cement to match. |
| 15 | M&L, applying3mm thick wall care putty on wall. |
| 16 | Preparation of old wall surface including cracks filling up to 3mmplastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion as specified in clause 15.14.5 in MES SSR Pt-1 1991as directed by Engg In Charge |
| 17 | Preparation of new wall surface including cracks filling up to 3mmplastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion over Chalk whiting, on plastered surfaces, as specified in clause 15.14.5 in MES SSR Pt-1 1991as directed by Engg In Charge |
| 18 | Preparation of old ceiling surface including cracks filling up to 3mmplastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion as specified in clause 15.14.5 in MES SSR Pt-1 1991 s directed by Engg In Charge |
| 19 | Preparation of new ceiling surface including cracks filling up to 3mmplastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion over Chalk whiting, on plastered surfaces as specified in clause 15.14.5 in MES SSR Pt-1 1991and as directed by Engg In Charge |
| 20 | Preparation of old wall surface including cracks filling up to 3mmplastered or unplastered brooming down etc and apply two coat of cement paintspecified in clause 15.7 & 15.15in MES SSR part-1 1991 and as directed by Engg In Charge |
| 21 | Preparation of new wall surface including cracks filling up to 3mmplastered or unplastered brooming down etc and apply two coat of cement paintspecified in clause 15.7 & 15.15in MES SSR part-1 1991 and as directed by Engg In Charge |
| 22 | Preparation of old steel surface of any description over 10 cm girtth or width not otherwise described and apply two coat of synthetic enamelpaint and specified in MES SSR part-1 1991 and as directed by Engg In Charge |
| 23 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial area N exc 150 sq cm. |
| 24 | Taking down chowkhat or frame not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) and removal to store. |
| 25 | Taking down chowkats or frame exc 1.5 sqm n exc 4.0 sqm with shutters (without taking off shutters from frame) and removal to store. |
| 26 | S&F, 4.8 mm thick ,Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, fixed in aluminium frame work. |
| 27 | S & F, Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm. |
| 28 | S&F Solid PVC Door frame of size 50 mm x 47 mm made out 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing. |
| 29 | S&Ffactory made Solid PVC Doorshutter30 mmthick ( style) consisting of framemade outof M.S. square tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side etc. & fixing in the frame at site as per specification & drawing. |
| 30 | S&F Aluminium, anodised, barrel tower bolts 200mm length of extruded section. |
| 31 | S&F, 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 32 | S&F, 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21. |
| 33 | S&F Alluminium alloy handles, of 150mm size cast type anodised. |
| 34 | Dismantling water tanks Capacity in litres Exc 500 & n exc 1000 and removing to store. |
| 35 | S& F of 500 ltr capacity rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed as per specification. |
| 36 | S&F, 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms). |
| 37 | S&F of wash basins, vitreous China (flat back or angle back type) size 630x450mm, including cutting for and pinning inn ends of brackets or erecting stand but exculsive of fixing of supply and waste pipe. |
| 38 | Fixing only in repair wash basins, vitreous China (flat back or angle back type) any size including cutting for and pinning inn ends of brackets or erecting stand but exculsive of fixing of supply and waste pipe. |
| 39 | S&F, 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed. |
| 40 | S&F, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) |
| 41 | S&F, 32mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm. |
| 42 | S & F vitreous china wash down water closet ( Pedestal pattern ), White including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device with PVC valveless syphonic action flusing cistern (10 Litres) low level white with inlet ball valve, float and handle including brakets, flush pipe of polyethylene of low or high density PVC 32 mm dia. |
| 43 | S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with PVC valveless syphonic action flusing cistern (10 litres) low level white with inlet ball valve, float and handle including brakets, flush pipe of polyethylene of low or high density PVC 32 mm dia. Fixing in repair |
| 44 | S & F Vitreous China urinals white colour, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe. |
| 45 | S & F Vitreous china squatting plate urinal, white |
| 46 | S&F, Vitreous China bowl type urinal flat back, sizeof 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe including connections to flushing pipeand outgoing pipes fixed in repairs. |
| 47 | S&F, 32mm Waste coupling of PTMT (half or full threaded) suitable forurinals, (Minimum weight 32mm-45gms) |
| 48 | S&F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 49 | S&F, 10 litres PVC valveless, syphonicaction type, flushing cistern,low level, white, with inlet,ball valve, float and handleincluding brackets fixed in repair. |
| 50 | S&F flush pipe of polythylene of low or high density or PVC 32mm dia,for low level cisterens of squatt patteren closet including all joints and making good to the floor |
| 51 | S&F 15 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors. |
| 52 | S&F 20 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors. |
| 53 | Taking up or down steel tubing 15 mm and connections, including cleaning for refixing or removal to store. |
| 54 | Refixing old steel tubing 15mm and connections in new or old position (Walls, ceiling, floors, etc. |
| 55 | Taking up or down steel tubing 20 mm and connections, including cleaning for refixing or removal to store. |
| 56 | Refixing old steel tubing 20 mm and connections in new or old position (Walls, ceiling, floors, etc. |
| 57 | Cutting existing steel tubing 15 mm for alterations or additions. |
| 58 | Screwing existing steel tubing for alterations or additions (or lengtheningscrew on pipe to form connector) |
| 59 | S&F 15 mm Stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 60 | S & F 15 mmfancy type Bib tapscast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed. |
| 61 | S & F 15 mm, fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with shanks and fly-nuts, screwed for iron pipe and fixed. |
| 62 | S & F 15 mmBib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) |
| 63 | S & F,15 mm Pillar taps of PTMT anycolour high pressurescrewedfor iron pipeand fixed.(Minimumweight 15mm-110gms) |
| 64 | S&F 15 mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms), screwed both ends for iron pipe& fixed. |
| 65 | S&F 15 mm dia PVC connections with PTMT nuts of length 450mm. |
| 66 | S&F 15 mm dia PVC connections with PTMT nuts of length 600mm. |
| 67 | Supply & fixin repairs, 110 mm bore PVC (SWR) pipes, single socketed , in any length with rubber ring joints, fixed to walls/ceiling & including necessary clanps of required size etc complete all as specified & directed. |
| 68 | Supply & fixin repairs, 75 mm bore PVC (SWR) pipes, single socketed , in any length with rubber ring joints, fixed to walls/ceiling & including necessary clanps of required size etc complete all as specified & directed. |
| 69 | S&F 110 mm dia PVC (SWR) soil, waste and vent pipes single socketed,in any length with rubber ring joints, laid in trenches or in floors. |
| 70 | S&F 110 mm dia PVC (SWR) junction single, ( single T), equal or unequal. |
| 71 | S&F 75 mm dia PVC (SWR) junction single, ( single T), equal or unequal. |
| 72 | S&F 110 mm dia PVC (SWR) bends any radius. |
| 73 | S&F 75 mm dia PVC (SWR) bends any radius. |
| 74 | S&F 110 mm dia PVC (SWR) vent cowl. |
| 75 | S&F, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 76 | Removing building materials etc. to a distance of n exc. 1km, beyond the lead included in the rates, including loading, unloading and stacking at the destination. |
AI Tender Summary
Tender Timeline
Mar 11, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 31, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 01, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender