Tender For The Work For Load Increasing Of 33 Kv District Court Hathras Under Eudd Hatras On Turn-Key Basis - Supply Of Following Material As Per Relevent Iss 2 St Pole 9 Mtrlong 3 Ms Angle With Clamp 4 11 Kv Disc Insulator Complete 5 Earthing Com, hathras-Uttar Pradesh

Tender For The Work For Load Increasing Of 33 Kv District Court Hathras Under Eudd Hatras On Turn-Key Basis - Supply of Following Material as per relevent ISS 2 ST Pole 9 MtrLong 3 MS Angle with clamp 4 11 KV Disc Insulator complete 5 Earthing Complete 6 Stay Set Complete 7 Top Channal 8 Dropper Channel 9 ACSR Weasel conductor 10 LT XLPE Cable AL 3.5x150 sqmm 11 33 kv Cable Jointing Kit 3x120 sqmm 12 Cable AL 3x120 sqmm XLPE 33 kv 13 100 KVA T/F 33/0.4 KV 14 M.S Nut & Bolt 15 Holding clamp 16 Aluminium Lug 17 LT Protection Panel with D.B Box 18 Scope of work 19 Erection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work. 20 ST Pole 9 MtrLong 21 Fixing/ Erection of following item, cost of labor, material and T&P which required for completion of work 22 MS Angle with clamp 23 11 KV Disc Insulator complete 24 Top Channal 25 Dropper Channel 26 33 kv Cable Jointing Kit 3x120 sqmm 27 M.S Nut & Bolt 28 Holding clamp 29 Aluminium Lug 30 LT Protection Panel with DP Box 02 No. ckt of Stud type tailless fuse unit (500A, 650V) (Height of Tailless Unit 48 inch and width of tailless unit 3 inch) Panel Size H-(1650+300) mm, W-600mm, D-520 mm & thickness of CRCA sheet-2m along with Alu Busbar of size 60x10 mm for phases & neutral with colour code heat shrink sleeve and mounting stand of 50x50x6 mm MS Angle with Earthing Arrangement, Compatible for installation of MCCB 400 Amp 4 pole 31 Installation offollowing T/F on new constructed double pole in proper alignment direction & making HT/LT connection. 32 100 KVA T/F 33/0.4 KV 33 Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost. 34 Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer. 35 Cable Laying Structure as per RESPO Norms and as per direction of supervising engineer. 36 Laying, sagging and stringing and jumpering/binding etc. in 33 KV/11 KV / LT lines as per RESPO manual and as per direction of supervising engineer. 37 ACSR Weasel Conductor 38 LT XLPE Cable AL 3.5x150 sqmm 39 Cable AL 3x120 sqmm XLPE 33 kv

INR 1180 /-

INR 10000.0 /-

Refer document