Tender For Upgradation And Additional Security Works Of Dc Bungalow And Office, Churachandpur Under Part-V Of The Scheme For Assistance To State For Capital Investment Fy 2024-25, Imphal West-Manipur

TDR : 48173927

Tender Notice
BOQ

Expired

Imphal West , Manipur

Tender Brief : Tender For Upgradation And Additional Security Works Of Dc Bungalow And Office, Churachandpur Under Part-V Of The Scheme For Assistance To State For Capital Investment Fy 2024-25

Document Fees
₹ 25000 /-

EMD
₹ 608500.0 /-

Tender Value
₹ 3.04 Crore /-

Submission Date
17-03-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	DC Bangalow
2	( I )- Construction of Perimeter fencing
3	SH: (A)DISMANTLING & DEMOLISHING
4	Dismantling barbed wire or flexible wire rope in fencing includingmaking rolls and stacking within 50 metres lead.
5	Dismantling steel work in single sections including dismemberingand stacking within 50 metres lead in:(i)Channels, angles, tees and flats
6	Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge.
7	Demolishing dry brick pitching in floors, drains etc. includingstacking serviceable material and disposal of unserviceablematerial within 50 metres lead
8	SH: (B)FENCING(182 Rm + 53.00 m for old fencing=235.00Rm)
9	EARTH WORK
10	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
11	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
12	CONCRETE WORKS
13	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
14	RCC WORKS
15	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
16	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
17	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
18	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a )Mild steel
19	(b)Thermo-Mechanically Treated bars
20	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
21	(b) Columns, Pillars, Piers, Abutments, Posts and Struts.
22	BRICK WORKS
23	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i)cement mortar 1:4 (1 cement : 4coarse sand)
24	STONE WORKS
25	Polygonal rubble masonry/R.R. masonry (uncoursed/brought to courses) squared rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation & plinth in cement mortar 1: 6 (1 cement:6 coarse sand) i/c levelling up with cement concrete 1:6:12 (1 cement:6 coarse sand:12 stone aggregate20 mm nominal size) at plinth level.
26	FINISHING
27	12mm cement plaster 1:4 (1 cement : 4 coarse sand).
28	15mm cement plaster 1:4 (1 cement : 4coarse sand).
29	Finishing walls with textured exterior paint of required shade : (i)New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
30	MISCELLANEOUS
31	75 cm, high fencing with angle iron post 50 X 50 X 6 mm of 1.24 m long placed at every 2.44 m apart embeded in R.C.C. columns and every 1st, 5th and corner posts to be struted providing with 6 (six) horizontal lines and two diagonals of G.I. barbed wire ( 0.164 kg/m.) between two posts filledand fixed with G.I. staples etc. complete.
32	( II )- Construction of Steel Gate
33	EARTH WORK
34	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
35	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
36	CONCRETE WORKS
37	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5 coarse sand :10 graded stone aggrt. 40mm nominal size).
38	RCC WORKS
39	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
40	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
41	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a )Thermo-Mechanically Treated bars
42	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
43	(b) Columns, Pillars, Piers, Abutments, Posts and Struts.
44	BRICK WORKS
45	Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in Superstructure aboveplinth level upto V level in all shapes and sizes in: (i) (1 Cem: 4C/Sand)
46	STEELWORKS
47	Providing and fixing steel gate partly grills and partly M.S. sheet 3.16 mm thick with M.S. angle frame of 65 X 65 X 6 mm including handles, hold fasts, locking arrangment and applying a priming coat of red lead paint ( as per standard design),
48	FINISHING
49	12mm cement plaster 1:4 (1 cement : 4coarse sand).
50	Finishing walls with textured exterior paint of required shade : (i)New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
51	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
52	( III )- Repairing of DC Residential building
53	SH: (A)DISMANTLING & DEMOLISHING
54	Dismantling cement asbestos or other hard board ceiling orpartition walls including stacking of serviceable materials anddisposal of unserviceable materials within 50 metres lead.
55	Dismantling doors, windows and clerestory windows (steel orwood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within50 metres lead (i)Of area 3 sq. metres and below
56	Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within 50metres lead :15.35.1 Upto 10mm thick
57	Dismantling tile work in floors and roofs laid in cement mortarincluding stacking material within 50 metre lead.15.23.1 For thickness of tiles above 25 mm and upto 40 mm
58	SH: (B) REPAIRING BUILDING
59	CONCRETE WORKS
60	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
61	Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq. metres and under including cutting the patch in propershape, raking out joints and preparing and plastering the surface ofthe walls complete including disposal of rubbish to thedumpingground within 50 metres lead :14.1.1With cement mortar 1:4 (1 cement: 4 fine sand)
62	WOOD WORKS
63	Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood
64	Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood(b)35 mm thick shutters
65	Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.
66	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm
67	Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm
68	(b) 100x10 mm
69	Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm
70	(b) 100 mm
71	Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm
72	Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.
73	ROOFING AND CEILING
74	P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).
75	FLOORING
76	Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm
77	FINISHING
78	Applying priming coat :-(a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
79	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
80	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
81	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.
82	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
83	2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.
84	SH : ( B )SANITARY ITEMS
85	Providing and fixing white vitreous china pedestal type watercloset ( European type W.C. pan ) with seat and lid, 10 litre low levelwhite PVC. flushing cistern i/c flush pipe ,manually controlled device (handle lever) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required:i) W.C pan with ISI marked white solid plastic seat and lid.
86	Providing and Fixingwash basinwithC.I. brackets, 15mm C.P BRASS PILLAR TAPS, 32mm C.P brass waste of standard patter, i/c painting of fittings and brackets,cutting and making good the walls whereever required a) white vitreous china flat back wash basin size 450x300mm with single 15 mm C.P brass pillar tap.
87	Providing and fixing C.P. bib cock of superior quality.
88	Providing and fixing brass stop cock of superior quality.
89	Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws
90	Providing and fixing 600 X 450 mm bevelled edge Mirror ofsuperior glass (of approved quality) quality complete with 6mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washers complete.
91	Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work). a)15 mm diameter
92	Providing and fixing G.I. pipes complete with G.I. fittings andclamps i/c cutting and making good the walls etc. (External work).a)32 mm diameter
93	Providing and fixing 100mm H.C.I. soil, waste & vent pipe
94	Providing and fixing grating for gully trap or Nahni trap. Satinless steel i) 100 mm nominal diameter.
95	Providing and fixing Lead chaulked joints to 100 mm H.C.I. pipes
96	Providing and fixing 100 mmterminal guard.
97	Providing and fixing 100x100x100mm H.C.I.plain branch of the required degree.
98	Providing and fixing C.P. brass shower rose with 12.5 mm or 19 mm inlet.(a)20 mm diameter. ordinary
99	SH: Providing and installing IEI
100	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.
101	Group A
102	Group B
103	Group C
104	Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.
105	Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.
106	(a) 2X2.5mm2+1X2.5mm2 earth wire
107	(b) 2X4mm2+1X4mm2 earth wire
108	Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.
109	5/6 amps switch
110	15/16 amps switch
111	3 pin 5/6 amps socket outlet
112	6 pin 15/16 amps socket outlet
113	SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell\"s)
114	S/F 48\"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)
115	S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.
116	S/F call bell/buzzer suitable foe DC/AC single phase 230V complete as reqd.
117	S/F bell push modular type complete as reqd.
118	S/F 25 amp air-conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front, 25 amp modular starter modular socket outlet and 25 amp plug i/c connection etc. as reqd.
119	S/F 1.5 ton 5 stars inverter service split air conditioner with stabilizer in built including all accessories for maximum separation of 5mts and connection as reqd. Make Samsung, Model No. AR18TV5PAWK.
120	S/F brass batten/angle holder i/c connection etc.as reqd.
121	S/F 12W LEDbulb
122	S/F 305mm sweep exhaust fan complete with accessories i/c connection etc. as reqd.
123	S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way
124	S/F 5 amp to 32 amp rating 230V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole
125	(a)10 amp MCB \"C\" Curve
126	(a)20 amp MCB \"C\" Curve
127	Supplying & fixing (following rating) double pole 240V isolatorin existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp
128	( IV )- Extention of Bedroom
129	EARTH WORK
130	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
131	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
132	Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km
133	CONCRETE WORKS
134	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
135	RCC WORKS
136	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
137	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
138	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
139	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level. ( a )Thermo-Mechanically Treated bars
140	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
141	(b) Columns, Pillars, Piers, Abutments, Posts and Struts.
142	(c)Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.
143	BRICK WORKS
144	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i)cement mortar 1:4 (1 cement : 4coarse sand)
145	FINISHING
146	12mm cement plaster 1:4 (1 cement : 4 coarse sand).
147	15mm cement plaster 1:4 (1 cement : 4coarse sand).
148	15 mm cement plaster 1:3(1 cement:3coarse sand)finished with a floating coat of neat cement.
149	WOOD WORKS
150	Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood
151	Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position.(a) First class Uningthou wood.
152	Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood(b)35 mm thick shutters
153	Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.
154	Providing and fixing M.S. round holding down with nuts and wahser plates completes
155	Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand: 6 stone aggrt. 20mm nominal guage).
156	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm
157	Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm
158	(b) 100x10 mm
159	Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm
160	(b) 100 mm
161	Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm
162	ROOFING AND CEILING
163	P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).
164	Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall befixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with
165	Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.
166	FLOORING
167	Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm
168	FINISHING
169	Applying priming coat :-(a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
170	Applying priming coat :-(b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:
171	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
172	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
173	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.
174	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
175	2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.
176	SH : ( B )SANITARY ITEMS
177	Providing and fixing white vitreous china pedestal type watercloset ( European type W.C. pan ) with seat and lid, 10 litre low levelwhite PVC. flushing cistern i/c flush pipe ,manually controlled device (handle lever) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required:i) W.C pan with ISI marked white solid plastic seat and lid.
178	Providing and Fixingwash basinwithC.I. brackets, 15mm C.P BRASS PILLAR TAPS, 32mm C.P brass waste of standard patter, i/c painting of fittings and brackets,cutting and making good the walls whereever required a) white vitreous china flat back wash basin size 450x300mm with single 15 mm C.P brass pillar tap.
179	Providing and fixing C.P. bib cock of superior quality.
180	Providing and fixing brass stop cock of superior quality.
181	Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws
182	Providing and fixing 600 X 450 mm bevelled edge Mirror ofsuperior glass (of approved quality) quality complete with 6mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washers complete.
183	Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work). a)15 mm diameter
184	Providing and fixing G.I. pipes complete with G.I. fittings andclamps i/c cutting and making good the walls etc. (External work).a)32 mm diameter
185	Providing and fixing grating for gully trap or Nahni trap. Satinless steel i) 100 mm nominal diameter.
186	Providing and fixing Lead chaulked joints to 100 mm H.C.I. pipes
187	SH: Providing and installing IEI
188	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.
189	Group A
190	Group B
191	Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.
192	Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.
193	(a) 2X2.5mm2+1X2.5mm2 earth wire
194	(b) 2X4mm2+1X4mm2 earth wire
195	Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.
196	5/6 amps switch
197	15/16 amps switch
198	3 pin 5/6 amps socket outlet
199	6 pin 15/16 amps socket outlet
200	SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6IA2W012 complete with connection as rqd. (Havell\"s)
201	S/F 48\"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)
202	S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.
203	S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way
204	S/F 5 amp to 32 amp rating 230V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole
205	(a)10 amp MCB \"C\" Curve
206	(a)20 amp MCB \"C\" Curve
207	Supplying & fixing (following rating) double pole 240V isolatorin existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp
208	(V) Construction of SM Barrack
209	EARTH WORK
210	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
211	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
212	Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km
213	CONCRETE WORKS
214	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
215	RCC WORKS
216	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
217	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
218	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
219	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.
220	( b )Thermo-Mechanically Treated bars
221	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
222	(b) Columns, Pillars, Piers, Abutments, Posts and Struts.
223	(c)Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.
224	BRICK WORKS
225	Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4C/Sand)
226	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i)cement mortar 1:4 (1 cement : 4coarse sand)
227	STEELWORKS
228	Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes
229	Providing & fixing 3 mm thick M.S. sheet door shutter and gateshutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.
230	Extra for providing and fixing wind ties of 40x 6mm flat iron section
231	FINISHING
232	12mm cement plaster 1:4 (1 cement : 4 coarse sand).
233	15mm cement plaster 1:4 (1 cement : 4coarse sand).
234	15 mm cement plaster 1:3(1 cement:3coarse sand)finished with a floating coat of neat cement.
235	WOOD WORKS
236	Steel glazed windows and ventilators of standard rolled steel sectionjoints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.(i) Ready made steel windows (side hung /top hung)
237	Providing and fixing M.S. round holding down with nuts and wahser plates completes
238	Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand: 6 stone aggrt. 20mm nominal guage).
239	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm
240	Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm
241	Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm
242	Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.
243	ROOFING AND CEILING
244	P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).
245	Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall befixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with
246	Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.
247	FLOORING
248	Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm
249	FINISHING
250	Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
251	Applying priming coat :-(b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:
252	Finishing walls with textured exterior paint of required shade : (i)New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
253	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
254	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.
255	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
256	2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.
257	SH: Providing and insstalling IEI
258	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.
259	Group A
260	Group B
261	Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.
262	Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.
263	(a) 2X2.5mm2+1X2.5mm2 earth wire
264	(b) 2X4mm2+1X4mm2 earth wire
265	Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.
266	5/6 amps switch
267	3 pin 5/6 amps socket outlet
268	S/F brass batten/angle holder i/c connection etc.as reqd.
269	S/F 12W LEDbulb
270	S/F 48\"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)
271	S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.
272	P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.
273	S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way
274	S/F 5 amp to 32 amp rating 230V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole
275	(a)10 amp MCB \"C\" Curve
276	(a)20 amp MCB \"C\" Curve
277	Supplying & fixing (following rating) double pole 240V isolatorin existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp
278	Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.
279	Extra for using salt and charcoal for pipe electrode as reqd.
280	P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.
281	Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.
282	(VI) Construction of Kitchen cum dining hall
283	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
284	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
285	Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km
286	CONCRETE WORKS
287	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
288	RCC WORKS
289	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
290	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
291	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
292	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.
293	( b )Thermo-Mechanically Treated bars
294	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
295	(b) Columns, Pillars, Piers, Abutments, Posts and Struts.
296	(c)Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.
297	BRICK WORKS
298	Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4C/Sand)
299	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i)cement mortar 1:4 (1 cement : 4coarse sand)
300	STONE WORKS
301	Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighatcoarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighatcoarse sand)
302	STEELWORKS
303	Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes
304	Extra for providing and fixing wind ties of 40x 6mm flat iron section
305	FINISHING
306	12mm cement plaster 1:4 (1 cement : 4 coarse sand).
307	15mm cement plaster 1:4 (1 cement : 4coarse sand).
308	15 mm cement plaster 1:3(1 cement:3coarse sand)finished with a floating coat of neat cement.
309	WOOD WORKS
310	Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood (b)35 mm thick shutters
311	Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood
312	25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :a) Ist class teak wood
313	Providing and fixing M.S. round holding down with nuts and wahser plates completes
314	Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand: 6 stone aggrt. 20mm nominal guage).
315	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm
316	Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm
317	(b) 100x10 mm
318	Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm
319	(b) 100 mm
320	Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm
321	Providing and fixing M.S. round holding down with nuts and wahser plates completes
322	Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.
323	ROOFING AND CEILING
324	P/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished wiP/F false ceiling with 12 mm thick plain / semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bounded pressed particle board conforming to I.S: 3087 finished with a ccoat of aluminium primer on both sides 7 edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-section 35 X 15 X 1.5 mm size main runners placed 600 mm centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600 X 1200 mm centre to centre i/c fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).
325	Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall befixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with
326	Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.
327	FLOORING
328	Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwith grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tilesmust be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet for placingthe tiles gently and easily.(1)Double charge vitrified tile polished finish of size (ii)Size of Tile 600 x 600 mm
329	FINISHING
330	Applying priming coat :-(a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
331	Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
332	Applying priming coat :-(b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:
333	Finishing walls with textured exterior paint of required shade : (i)New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
334	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
335	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
336	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.
337	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
338	2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.
339	SH: Providing and installing IEI
340	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.
341	Group A
342	Group B
343	Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in PVC casing & capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.
344	Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.
345	(a) 2X2.5mm2+1X2.5mm2 earth wire
346	(b) 2X4mm2+1X4mm2 earth wire
347	Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.
348	5/6 amps switch
349	15/16 amps switch
350	3 pin 5/6 amps socket outlet
351	6 pin 15/16 amps socket outlet
352	S/F brass batten/angle holder i/c connection etc.as reqd.
353	S/F 12W LEDbulb
354	S/F 48\"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades without regulator etc.as reqd. (Make Bajaj/Usha or Similar)
355	S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.
356	P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.
357	S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way
358	S/F 5 amp to 32 amp rating 230V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole
359	(a)10 amp MCB \"C\" Curve
360	(a)20 amp MCB \"C\" Curve
361	Supplying & fixing (following rating) double pole 240V isolatorin existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp
362	Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.
363	Extra for using salt and charcoal for pipe electrode as reqd.
364	P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.
365	Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.
366	( VII) Construction of Toilet block
367	EARTH WORK
368	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
369	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
370	Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km
371	CONCRETE WORKS
372	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
373	(b) 1:3:6 (1 cem :3coarse sand:6 graded stone aggrt.40mm n/size).
374	(c) 1:2:4 (1 cem :2coarse sand:4 graded stone aggrt.20mm n/size).
375	RCC WORKS
376	Providing and laying in position ready mixed plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement, admixture in recommended proportions as per IS:9103 to accelerate / retard setting of concrete,to improve ductility and workability withoutimpairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-charge; for the follwing grades of concrete.
377	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
378	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
379	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.
380	( b )Thermo-Mechanically Treated bars
381	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
382	(b) Columns, Pillars, Piers, Abutments, Posts and Struts.
383	(c)Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.
384	BRICK WORKS
385	Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4C/Sand)
386	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i)cement mortar 1:4 (1 cement : 4coarse sand)
387	STONE WORKS
388	Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighatcoarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighatcoarse sand)
389	STEELWORKS
390	Extra for providing and fixing wind ties of 40x 6mm flat iron section
391	FINISHINGS
392	12mm cement plaster 1:4 (1 cement : 4 coarse sand).
393	15mm cement plaster 1:4 (1 cement : 4coarse sand).
394	15 mm cement plaster 1:3(1 cement:3coarse sand)finished with a floating coat of neat cement.
395	WOOD WORKS
396	Providingandfixingpanelledorpanelledandglazedshuttersfordoors,windowsandclerestorywindowsincludingISImarkedM.Sbutthingesbrightfinishedofrequiredsizewithnecessaryscrews,excludingpanellingwhichwillbepaidforseparately,allcompleteas per direction of Engineer-in-charge.(a) Local best quality Tolhao wood (b)35 mm thick shutters
397	Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood
398	Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position. (c) Uchan/Tairen/Tolhao/Khangra.
399	25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :a) Ist class teak wood
400	Providing and fixing M.S. round or square bars with M.S. flats at required spcing in wooden frames of windows and clerestory windows.
401	Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand: 6 stone aggrt. 20mm nominal guage).
402	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :(a) 300x16 mm
403	Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250x10 mm
404	(b) 100x10 mm
405	Providing and fixing bright finished brass handles with screws etc. complete :(a) 125 mm
406	(b) 100 mm
407	Providing and fixing bright finished brass hard drawn hooks and eyes (i) 300mm
408	Providing and fixing M.S. round holding down with nuts and wahser plates completes
409	Providing and fixing 20mm plank as eave board with :- (a) Tolhao/Uchan wood.
410	ROOFING AND CEILING
411	Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall befixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with
412	Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.
413	FLOORING
414	Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand)(.i)Acid and alkali resistant tile.
415	Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand) (.i)In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand).
416	FINISHING
417	Applying priming coat :-(a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
418	Applying priming coat :-(b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:
419	Finishing walls with textured exterior paint of required shade : (i)New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
420	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
421	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
422	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with cement primer:- sqm Rs.
423	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
424	2nd class brick masonary 15 x 15cm open surface drain in c.m. 1: 5(1cem: 5 c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem: 5 c/sand : 10gr. st. aggrt. 40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem: 3 c/sand) with a floating coat of neat cement inside & outside as per standard design.
425	SH : ( B )SANITARY ITEMS
426	Providing and fixing white vitreous china pedestal type watercloset ( European type W.C. pan ) with seat and lid, 10 litre low levelwhite PVC. flushing cistern i/c flush pipe ,manually controlled device (handle lever) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required:i) W.C pan with ISI marked white solid plastic seat and lid.
427	Providing and Fixingwash basinwithC.I. brackets, 15mm C.P BRASS PILLAR TAPS, 32mm C.P brass waste of standard patter, i/c painting of fittings and brackets,cutting and making good the walls whereever required a) white vitreous china flat back wash basin size 450x300mm with single 15 mm C.P brass pillar tap.
428	Providing and fixing C.P. bib cock of superior quality.
429	Providing and fixing brass stop cock of superior quality.
430	Providing and fixing 610 x 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws
431	Providing and fixing 600 X 450 mm bevelled edge Mirror ofsuperior glass (of approved quality) quality complete with 6mm thick hard board ground fixed to wooden cleat with C.P. brass screws and washers complete.
432	Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work). a)15 mm diameter
433	Providing and fixing G.I. pipes complete with G.I. fittings andclamps i/c cutting and making good the walls etc. (External work).a)32 mm diameter
434	Providing and fixing 100mm H.C.I. soil, waste & vent pipe
435	Providing and fixing grating for gully trap or Nahni trap. Satinless steel i) 100 mm nominal diameter.
436	Providing and fixing Lead chaulked joints to 100 mm H.C.I. pipes
437	Providing and fixing 100 mmterminal guard.
438	Providing and fixing 100x100x100mm H.C.I.plain branch of the required degree.
439	Providing and fixing C.P. brass shower rose with 12.5 mm or 19 mm inlet.(a)20 mm diameter. ordinary
440	P/F C.I cover with frame for (manhole and chamber) (a) 600x450mm (Heavy duty)
441	SH: Providing and installing IEI
442	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.
443	Group A
444	Group B
445	Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC casing & capping etc.as reqd.
446	(a) 2X2.5mm2+1X2.5mm2 earth wire
447	(b) 2X4mm2+1X4mm2 earth wire
448	S/F brass batten/angle holder i/c connection etc.as reqd.
449	S/F 12W LEDbulb
450	Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioningetc. as reqd.
451	S/F 12\"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)
452	P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.
453	Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.
454	Extra for using salt and charcoal for pipe electrode as reqd.
455	P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.
456	Wiring for submain with 10m2 weather proof twin core Al. cond. Cableand G.I. bearer wire as reqd.
457	(VIII) Construction of 15000 litre Water Reservoir
458	EARTH WORK
459	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
460	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
461	CONCRETE WORKS
462	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level
463	(b) 1:3:6 (1 cem :3coarse sand:6 graded stone aggrt.40mm n/size).
464	(c) 1:2:4 (1 cem :2coarse sand:4 graded stone aggrt.20mm n/size).
465	RCC WORKS
466	Providing and laying in position ready mixed plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement, admixture in recommended proportions as per IS:9103 to accelerate / retard setting of concrete,to improve ductility and workability withoutimpairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-charge; for the follwing grades of concrete.
467	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
468	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)
469	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars
470	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
471	(b) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.
472	(c)Edges of slab and breaks in floors and walls (i) Under 20cm wide
473	FINISHING
474	15 mm cement plaster 1:3(1 cement:3coarse sand)finished with a floating coat of neat cement.
475	FLOORING
476	Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand)(.i)Acid and alkali resistant tile.
477	Providing and fixing 10mm thick acid and/or alkali resistant tilesof approved make and colour using acid and/or alkali resistingmortar bedding and joints filled with acid and/or alkali resistingcement as per IS : 4457 complete as per the direction of Engineer-in- Charge(a)In flooring on a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand) (.i)In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand).
478	SH : ( B ) ELEVATED PLATEFORM
479	EARTH WORK
480	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
481	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
482	CONCRETE WORKS
483	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
484	RCC WORKS
485	Providing and laying in position ready mixed plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement, admixture in recommended proportions as per IS:9103 to accelerate / retard setting of concrete,to improve ductility and workability withoutimpairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-charge; for the follwing grades of concrete.
486	Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Mild steel and Medium\Tensile steel bars.
487	( b )Thermo-Mechanically Treated bars
488	Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundation footings, bases of columns etc. and mass concrete.
489	STEELWORKS
490	Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes
491	Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominalG.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.(i)1000 litres net capacity storage tanks
492	(IX) SH: Construction of Sentry Tower (2 nos)
493	EARTH WORK
494	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.
495	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
496	Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km
497	CONCRETE WORKS
498	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a)C.C. 1:5:10 (1 cement :5coarse sand :10 graded stone aggrt. 40mm nominal size).
499	RCC WORKS
500	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size.)

Also Visit

Tenders

Manipur Tenders

Services Tenders

Human Resouce Service Tenders

Security Guard Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Upgradation And Additional Security Works Of Dc Bungalow And Office, Churachandpur Under Part-V Of The Scheme For Assistance To State For Capital Investment Fy 2024-25, Imphal West-Manipur

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Upgradation And Additional Security Works Of Dc Bungalow And Office, Churachandpur Under Part-V Of The Scheme For Assistance To State For Capital Investment Fy 2024-25, Imphal West-Manipur

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us