|
| 1 | Taking out Jhaw / Eucalyptus piles from river bed or from elsewhere including carrying, stacking materials in the nearest stack yard. (b) Above 17.5 cm. and up to 25 cm. diameter |
| 2 | Labour charges for taking out old wood work including cutting bolts and nuts and stacking within a lead of 100 metre etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) |
| 3 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed.Note Diameter of pile to be measured at a distance of 1.5 m from the thicker end. |
| 4 | (v) 20 cm av. Diameter. |
| 5 | iii) 15 cm av. Diameter |
| 6 | Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles.1) Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end. 3) For driving done by pile engine set (without satging ) under specific instruction of Engineer incharge, the rate will be enhanced by Rs. 4.00 per meter. |
| 7 | (v) 20 cm av. Diameter |
| 8 | iii) 15 cm av. Diameter |
| 9 | Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. (a) Width of thinner end above 10 cm. and less than 15 cm.(i) Jhaw / Eucalyptus |
| 10 | Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels)(b) Hard Wood (Mahua / Arjun / Tentul etc or similar quality hard wood as approved by the Engineer-in-charge) |
| 11 | Supplying at site and fitting & fixingMild Steel long nuts & bolts etc. complete as per the direction of the Engineer- in- charge. |
| 12 | Coal Tarringwith 5% pitch including cost of material and labour complete as per direction of the Engineer -in- charge b) Two coat. |
| 13 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incidental charges etc. all complete(capacity 50 Kg |
| 14 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials).Note: Volume of earth /sand filled bags should not be less than 0.028 cum./bag |
| 15 | Dumping in position earth/ sand filled gunny/ poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts |
| 16 | Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing reaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading,transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same on embankments, clannels, filling depressions in requisite profile, levelling as per direction of the Engineer-in-charge within a lead of, NB :- Measurement to be taken on the basis of stack measurement / prepost work section measurement after deduction of void as per norms. No extra payment will be made for stacking.E) Beyond 4.00 km and upto 5.00 km Note of Royalty: This rate is includes compensation for earth for land owned/arranged by the contractor @ Rs 25.00 per cum and royalty charges on earth @ Rs 29.00 per cum and cesses charges @ Rs. 5.30 per cum.. The royalty and cess will be paid to the agency on production of necessary documents in support of payment made towards the royalty and cess. |
| 17 | Supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter (Dia to be measured at mid length) |
| 18 | Driving bamboo pins in standing or flowing water including scaffolding and driving appliances a) Where boats are not necessary |
| 19 | Supplying, fitting and fixing with iron nails half splitbamboowailing pieces (av. dia. of bamboo not less than 5.0 cm.) |
