}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 48157352

    • Tender For Supply And Installation Of Incoming Chute And Skirt Board Of Conveyer 2A 2B With Modification Of Frame Of Tail Pulley At Chp Ph1 2X600mw Sstpp Mppgcl Dongalia, dongalia-Madhya Pradesh

    Madhya Pradesh Power Generating Company Limited has published Tender For Supply And Installation Of Incoming Chute And Skirt Board Of Conveyer 2A 2B With Modification Of Frame Of Tail Pulley At Chp Ph1 2X600mw Sstpp Mppgcl Dongalia. Submission Date for this Tender is 23-04-2025. Conveyors and Accessories Tenders in dongalia Madhya Pradesh. Bidders can get complete Tender details and download the document.




    Tender Notice

    48157352
    Corrigendum : Tender For Supply And Installation Of Incoming Chute And Skirt Board Of Conveyer 2A 2B With Modification Of Frame Of Tail Pulley At Chp Ph1 2X600mw Sstpp Mppgcl Dongalia
    Open Tender
    NCB
    Madhya Pradesh
    Dongalia
    23-04-2025

    Tender Details

    Supply And Installation Of Incoming Chute And Skirt Board Of Conveyer 2A 2B With Modification Of Frame Of Tail Pulley At Chp Ph1 2X600mw Sstpp Mppgcl Dongalia , Fabrication & Supply Of Weld Overlay Incoming Chute For Conveyor 2A/2B Of 2X600mw, Chp, Ph-I, As Per Attached Drawing. Material – Weld Overlay Plate ( Impact Plate (16+4)Mm Thk, Erosion Plate(8+4)Mm, Non-Impact Plate 12Mm Ms Specification:- Technical Specification Of Weld Overlay Wear Plates For Conv. 1A/1B To Conv. 2A /2B Chute:- Base Plate Thick-16 Mm, Is-2062, Grade B (Ms) And 4 Mm Hard Facing On One Side. Hardness- 62 Hrc Min. Alloy Basis:- C(3.25-4.55), Mn(0.40-0.70), Si(1.0-2.0), Cr(16-20), B(0.22-.072), W % Of Primary Carbide-35-40%, % Of Eutectic Carbide-24-29% % Of Mar Tensile- 14-20%, % Of Austenite – 15-20% Tolerance Of Hard Facing Thk. Shall Be +/- 0.5 To 1 Mm. Wear Resistance Compare To Ms For Hard Layer Only-35 Times. Material Should Be Supplied With Weld Metallurgy With Primary Carbide As Chromium Carbide & Eutectic Carbide Along With Austenite And Marten Site With Bas Plate Of Is 2062 Grade “B” And This Metallurgy Will Retain Its Hardness Even At Temperature Of 400 Deg. C And Resist Wear Due To Erosion. The Weld Overlay Will Have C, Si, Mn, Cr, B &W As Element Uniformly Distributed Throughout The Matrix Giving Surface Resistance Capacity Towards Extreme Wear. The Cladding Will Be Done With Flux Cored Wire And Hardness Of Weld Overlay Will Be 62 Hrc Min. With The 8 Mm Thickness. , Installation Charges Of Tail Pulley Base Frame & New Chute Of Conveyor 2A/2B

    Corrigendum Details

    Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
    1 09-04-2025 1st Extension of due date Date 16-04-2025
    2 16-04-2025 2nd Extension of due date Date 23-04-2025

    Key Value

    Document Fees
    INR 5000 /-
    EMD
    INR 200000.0 /-
    Tender Value
    INR 1.25 Crore /-
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail