|
| 1 | Demolishing R.C.C. work manually by mechanically means including stacking of steel bars and disposal of unserviceable material within 50 metres(fifty metres) lead as per direction of Engineer-in-charge |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 (fifty) metres lead as oper direcrtion of Engineer-in-charge including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth any level 1:5:10 ( One cement : five coarse sand : ten graded stone aggergate 40mm (forty milimetre) nominal size including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 4 | Structural steel work reiveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 5 | Half brick masonry in common burnt clay F.P.S. b (non modular)brick of class designation 7.5 (seven point five) in superstructure above plinth level upto floor to any level in cement mortar 1:3(one cement :three coarse sand) including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 6 | Providing 1st class klin seasoned door wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or witrh dash fasterners of required dia and length( hold fast lugs or dash fastener shall be paid for seprately including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 7 | Providing 30mm (thirty milimetre) thick1st class deodar wood for frames of doors.windows and clerestory windows using 6mm (six milimetre) thick double float glass panes,including, beading, ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 8 | Providing and fixing panelling in panelled door shutters( area of opening for panel insertsexcluding portion inside grooves or rebates to be measured). Styles of door should be 35mm (thirty five milimetre) thick first class deodar wood with side rails and top rails 100x40mm (one hundred into forty milimetre) finished size, k middle rail 150x40mm (one hundred fifty into forty milimetre) finished size,infull panel of door should be 12mm (tweleve milimetre) thick phenol bonded exterior grade commercial boardpre-laminated from both sides in matt finish of approved shade including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 9 | Providing and fixing 19mm (nineteen milimetre) thick water proof commercial board in shelves/box for cup board with butt joints and fixingwith nails and screws etc. including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 10 | Providing and fixing 19mm (nineteen milimetre) thickcommercial board water proof shutterfor cup boards including fixing with niockel plated piano hinges with screws etc. completeincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 11 | Providing and fixing magentic catcher of approved quality in cop board /ward robe shuttersincluding fixing with necessary screws completetriple strip vertical type including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 12 | Provididng and fixing bright/matt finished stainless steel handles of approved quality and make with nencessary screws etc completetriple strip vertical type including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 13 | Providing and fixing 50mm (fifty milimetre) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws ertc. Completetriple strip vertical type including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 14 | Providing and fixing 300mm (three hundred milimetre) long with necessary screws etc. complete as per directions of Engineer-in-chargetriple strip vertical type including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 15 | Providing 250x16mm (two hundred fifty into sixrteen milimetre) sliding door bolts with nuts and screws etc. complete including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 16 | Providing and fixing 200x10mm (two hundred into ten milimetre) ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws completetriple strip vertical type including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 17 | Providing and fixing 100x10mm (One hundred into ten milimetre) ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws completetriple strip vertical type including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 18 | Providing and fixing 125mm (one hundred twenty five milimetre)handles, ISI marked, oxidisedM.S. handles conforming IS:4992 with necessary screws completeincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 19 | Providing and laying fully body vitrified floor tiles of size single piece of thickness 10mm (ten milimetre) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS:15622, of approvedmake, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4(one cement : four coarse sand), jointing with grey cement slurry @ 3.3kg/sqm (three point three kilogrames per square metre) including grouting the joints with white cement and matching pigments etc., complete AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws complete including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 20 | Providing and laying fully body vitrified floor tiles of size single piece of thickness 10mm (ten milimetre) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS:15622, of approvedmake, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:3(one cement : three coarse sand), jointing with grey cement slurry @ 3.3kg/sqm (three point three kilogrames per square metre) including grouting the joints with white cement and matching pigments etc., complete AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws complete including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 21 | Provididng and fixing anit-skid 1st guality matt finished ceramic glazed floor tiles weith antiskid pattern conforming IS:15622 10mm (ten milimetre) thick of approved make in all colours,shades excedpt burgundy,green, black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm (tweleve milimetre) thick bed of ceement mortar 1:3( one cement :three coarse sand) and jointing with grey with grey cedment slurry @ 3.3kg (three point three kilogrames) per square metre including pointing in white cement mixed with pigment of matching shade complete, size 30x60cm (thirty into sixty centimetres) including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 22 | Granite of thickness 18mm (eighteen milimetre) for wall lining (veneer work) backing filled with fa grout of average 12mm (tweleve milimetre) thick in cement mortar 1:3(one cement : three coarse sand) including pointing with white cement mortar 21:2 (one cement :two marble dust) with an admixture of pigment to match the martble shade ( to be secured to the backing by means of cramps , which shall be paid for separately) area of slabn over 0.50 (zero point five zero) square metreincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 23 | Providing 20mm (twenty milimetre) cement plaster in cement mortar 1:4 (one Cement :4 fine sand)including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 24 | Finishingwith delux Multi surface paint system of interiors and exteriors using primer as per manufactures specifications, painting steel work with Delux Multi surface paint to give an even shade two or more coat applied @0.90 litre/10 square metre over an under coat of primer applied @ 0.75 litre/10 square metreof approved brand and manufacture including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 25 | Finishingwith delux Multi surface paint system of interiors and exteriors using primer as per manufactures specifications, painting steel work with Delux Multi surface paint to give an even shade two or more coat applied @0.90 litre/10 square metre over an under coat of primer applied @ 0.80 litre/10 square metreof approved brand and manufacture including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 26 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture to give an even shade New work over and including thinnable primer coat with cement primerincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 27 | Providing and fixing vitreous chian dual purpose closet suitable for use as squatting pan of European type water closet(Anglo Indian W.C. pan) with seat and lid fixed with C.P. brass hinges and rubber buffers 10 Litre (Ten litre) low level flushing cistern with fitting and brackets 40mm (forty milimetre) flush bend, 20mm (twenty milimetre) over flow pipe, wtih specials of standard make and monsquioto proof coupling of approved muncipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required, white vitreous china of universal 2061 EWC570x460x400(five hundred seventy into four hundred sixty into four hundred)with combi flush of cera of its equivalent with white solid plastic seat and lid with C.P. flush bendincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 28 | Providing and fixing G.I. inlet connection for flush pipe connectring with W.C.panincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 29 | Providing and fixing wash basin with C.I. brackets, 15mm (fifteen milimetre) C.P. brass pillar tap, 32mm (thirty two milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereever reuire, white vitreous china wash basin No. 10001 of size 550x400 (five hundred into four hundred milimetre) of hardware or equivalent with a pair of 15mm(fifteen milimetre) C.P. brass pillar tapincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 30 | Providing and fixing 600mmx450mm(six hundred into four hundred fifty milimetre) bevelled edge mirror of superiorglass (of approved quality) mounted on 6mm (six milimetre) thickhard board ground fixed to wooden cleats with C.P. brass screws and washers completeincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 31 | Providing and fixing C.P. soap dish holder type(S-steel) No. 1531 of hitliner series of jaaguar or ESS-ESS or its equivalent with necessary fitting, screws etc. completeincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 32 | Providing and fixing toilet paper holder with flat recessed type No. 1553 of hotiner series of jaguar or ESS-ESS or irts equivalent witrh necessary fitting, screws etc. completeincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 33 | Providing and fixing C.P. cloth linear retractrable (Ring) no. hotinear series of jaguar opr ESS-ESS complete with necessary fittings, screws etc. completeincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 34 | Providing and fixing C.P. jet spray of approved quality and colour with one metre tube pipe with necessary fittings etc. completeincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 35 | Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm (forty milimetre), including painting or fittings and brackets cutting and making good the walls wherever required kitchen sink with drain board 510x1040mmm ( five hundred ten into one thousand forty milimetre) bowl depth 250mm (two hundred fifty milimetres) including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 36 | Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100mm (one hundred milimetre) outlet hubless centrifugally cast(spun) iron epoxy coated inside and outside as per IS:15905including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 37 | Providing and fixing polyethelene -Aluminium-polyethelene PE-AL-PE composiste pressure pipes conforming to IS-15450, U.V. stabilized weith carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80° C, incuding all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees,reducers,couplers and connections etc. with clamps at 1.00 ( one metre) spacing.This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer-in-charge concealed work, including cutting chases and making good the wall etc. including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 38 | Providing and fixing 110 mm (one hundred ten milimetre) dia high pressure UPVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including all special fittings of composite material(engineering plastic blend and brass inserts weherever required) e.g. single equal branch, oval access doors, collars, P or S trap etc. with claps at 1.20 metres (one point two zero metre) spacing. This includes the costs of cutting chases and including testing of joints complete as per directrion of Engineer in charge concealed work, ,including cutting chases and making good the walls etc. including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 39 | Providing and placing on terrace( at all floor level) polyethylene water storge tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without and the base support for tank |
| 40 | Providing and fixing 15mm (fifteen milimetre) nominal bore C.P. brass angle valve with basin mixer and geyser points of approved qualityconforming IS:8931including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 41 | Providing and fixing 32 mm (thirty two milimetre) dia C.P. brass chain and rubber plug for sink or wash basinincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 42 | Providing and fixing PTMT liquid soap container 109mm ( one hundred nine milimetre) wide, 125mm (one hundred twenty five milimetre) high and 112mm (one hundred tweleve milimetre) distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, sweighing not less than 105 (one hundred five grams)including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 43 | Providing and fixing C.P. towel rack with single rail No. 1581 of hotlinear series of jaguar or ESS-ESS complete with brackets fixed to wooden cleatrs withg C.P. brass screws with concealed fitrtings arrangement of approved quality and colour with necessary fitting screws etc. complete including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 44 | Providing and fixing 15mm (fifteen milimetre) nominal borebrass bic cock of approved quality conforming to IS :8931including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 45 | Providing and fixng 15 mm (fifteen milimetre) dia C.P. brass stop cock concealed of standard design and of approved make conforming IS:8931 including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 46 | Providing and fixing 15mm (fifteen milimetre) nominal boreuplasticised PVC connection pipe with brass unions 45cm (forty five centimetre) lengthincluding hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
| 47 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete G.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm(three hundred into three hundred milimetre) size (inside) the weight of cover to be not less than 4.50 kgs ( four point five zero kilograms) and frame to be not less than 2.70 kg ( two point seven zero kilograms) as per standard design 150x100 ( one hundred fifty into one hundred milimetre) size P type with common clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) round mouth traps, 100mmx100mm( one hundred into one hundred milimetre) size kP or S type including hauling/ carriage ofall labour equipementsand materials to various locationsthrough all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge. |
