|
| 1 | Supplying of labours vehical with fuel & lubricants with all tools & plants for repair & maintenance of drilled tubewells in DMC Dhanbad for minor repair as per direction of E/I. |
| 2 | Supplying of labours tools and equipments for dismantling of Head water tank assembly and rotten old sunction pipe, connecting rod, cylinder assemble and charging of old damaged spare parts and sunction pipe connecting rod etc, and making good condtion of T/ Well all transportation cost including carriage of old materials etc, all complete jobs as per direction of E/I. |
| 3 | Supplying fitting & fixing the spare parts of approved make of ISI mark as required to maintain the proper water discharge to the beneficiary payment should be made as per actual consumption of materals against certification of consumption.-----------Hexagonal bolt M12x1.75x40mm long |
| 4 | Hexagonal nut M12x1.75mm |
| 5 | Washer M12 (2.5mm thick) |
| 6 | High Tensile bolt M10x1.50x40mm long |
| 7 | Nyloc nut M10x1.5mm |
| 8 | Handle Axle (Stainless steel) |
| 9 | Washer for Handle Axle (4mm thick) |
| 10 | Ball bearing 6204 Z |
| 11 | Spacer for Handle |
| 12 | Chain with coupling |
| 13 | Hexagonal Bolt for front Cover M12x1.75mm long |
| 14 | Nitrile Rubber cup washer for Mark-II |
| 15 | Nitrile sealing ring Mark-II |
| 16 | Nitrile rubber sealing Big for lower valve mark - II |
| 17 | Nitrile rubber sealing Small for Upper valve mark - II |
| 18 | Hexagonal rod coupling M12x1.75x50mm long |
| 19 | Pump Head assembly (G.I.) with front cover, Bolt and third plate |
| 20 | Front cover (G.I.) |
| 21 | Handle Assembly (G.I.) |
| 22 | Water Tank Assembly for Mark-II (G.I.) |
| 23 | Stand Assembly (G.l.) Normal |
| 24 | Connecting Rod 3mtr. Long with coupling and nut (Electrogalvanized) |
| 25 | Cylinder Assembly complete set for Mark - II |
| 26 | Upper valve Assembly complete set for India Mark - II |
| 27 | Lower valve Assembly complete set for India Mark - II |
| 28 | Reducer Cap for cylinder Mark - II |
| 29 | Planger rod (S.S.) for Mark-II |
| 30 | Rubber seat Retainer for Mark - II |
| 31 | Third Plate for head Assembly (Galvanized) |
| 32 | Gun Metal Spacer |
| 33 | Check valve Guide Mark - II |
| 34 | Check Valve Seat for Mark-II |
| 35 | Nitrile Rubber \"O\" Ring VLOM - 50 |
| 36 | Brass liner IM-II |
| 37 | 32 mm seamless pipe socket (G.I.) |
| 38 | G.I. pipes 3.00 mtr. (TATA mark or equivalent) 32mm dia |
| 39 | Add CP + Overhead Charges (10% + 5%) |
| 40 | Add 18% GST |
| 41 | Add 1% Labour Cess |
