|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 2 | Material and Labour for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishescomplete all as specified and directed. |
| 3 | Material and Labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 4 | Material and Labour for light shade or printed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exc 0.36 sqm but not exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 5 | Material and Labour glazed ceramic joint free coloured tiles in vertical surfaces 450x300x7mm/600x300x7mmthick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 6 | Material and Labour for machine cut kota stone slab flooring 20-25mm thick over 15mm thick 1:4 cement mortar screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing includingdismantling complete all as specified and directed. |
| 7 | Material and Labour for machine cut kota stone slab flooring 18-20mm thick over 10 mm thick 1:4 cement mortar screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completein riser to steps, skirting dado and wall including dismantaling old unserviceable one complete all as specified and directed. |
| 8 | Demolition of brick work or stone / boulderor concrete block masonry includingall quoins, arches, pillars, etc. built in cement mortar complete all as specified. |
| 9 | Material and Labour for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 10 | Dismantling wall and ceiling boards ( fibre pulp, insulation etc ) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed. |
| 11 | Material and Labour for aluminiumanodised snap grid frame work of size 605x605mm for false ceiling withhanging arrangement of 6mm dia G .I( up to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made outof GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed. |
| 12 | Material and Labour for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed. |
| 13 | Supply and fixing in repair solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of salvent cement and fixing at site including of PVC frame of size 5mm thick PVC sheet fillet of width 35mm complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 15 | Material and Labour for Rendering 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | Material and Labour for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening complete all as specified and directed. |
| 17 | Material and Labour for rendering 10 mm thick in cement mortar 1:4 on concrete/Brick surfaces, chajja or projectionsfinished even and smooth without using extra cement complete all as specified and directed. |
| 18 | Material and Labour for Preparation of new plastered surface of walls & apply two coat of cement base paint complete all as specified and as directed |
| 19 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 but not exceeding 4.0 sqm each complete all as specified and directed. |
| 20 | Supply and fixing aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mmthick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick including aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock, double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed. |
| 21 | Taking down carefully steel windowincluding shutter, grill and glass panesof any size and making good to the damaged/ disturbed surfaces while cutting holescomplete all as specified and as directed. |
| 22 | Supply and fixing powder coatedaluminium (glazed/ gauged) window shutterssliding type including 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws includingfittingscomplete all as specified and directed |
| 23 | Supply and fixing aluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thick with fixing arrangement complete all as specified and directed |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 25 | Supply and fixing sheet glass in repairs ordinary quality 5.5 mm thick type fixed to aluminium doors in squares exc 0.5 sqm in each pane |
| 26 | Supplying and fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and wooden beads upto four storied of building complete all as specified and as directed. |
| 27 | Supply and fixing in repairs 4 mm th Sheet glass, ordinary quality and glazing with oil putty/wooden beads in square in any size all as specified and directed. |
| 28 | Supply and fixing 100mm long butt Hinges, medium weight, cold rolled mild steelfixef in repair complete all as specified and directed. |
| 29 | Supply and fixing in repairs of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 30 | Supply and fixing in repairs of 125 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 31 | Supply and fixing in repairs of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 32 | Material and Labour in repairs for 15 mm bore Chromium plated fancy type Bip taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 33 | Material and Labour in repairs for 15 mm dia Fancy type Chromium plated stop valves( Angular type), cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 34 | Supply and fixing in repairs PTMT 32mm dia waste coupling (half or full threaded), minimum weight 60 gms) fixed to stainless steel sinks complete all as specified and directed. |
| 35 | Supply and fixing in repairs for 125mm dia PTMT grating doom with waste hole for wastepipe ( minimum weight 40 gram) ccomplete all as specified and directed. |
| 36 | Supply and fixing in repairs for 450mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings complete all as specified. |
| 37 | Supply and fixing in repairs for PVC waste pipe 32/40mm bore fixed to PTMTwaste coupling for kitchen sink complete all as specified and directed. |
| 38 | Supply and fixing in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specified. |
| 39 | Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve foat and handle including brackets 10 litres complete all as specified and directed. |
| 40 | Supply and fixing in repairs viterous China wash basin, white flat back, size 550x400mm excluding taps, waste chain and plug and porcelan stopper but including brackets complete all as specified and directed. |
| 41 | Supply and fixing in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 42 | Material and Labour for 75 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in complete all as specified and directed. |
| 43 | Material and Labour for preparation of new steel surfaces over 10cm width or girth and applying two coatsof synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 44 | Taking down PVC chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 45 | Material and Labour for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications complete all as specified and directed. |
| 46 | Material and Labour for factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheety strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet fortop rail, lock rail and bottom rail on either side and as gap insert for top rail and bottomrail; panelling of plain colour PVC sheet to be fitted in the MS frame welded.sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 47 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 48 | Material and Labour for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as inplinth protection surface finished fair and evencomplete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed. |
| 49 | Material and Labour for 100mm thick cement concrete type B-2, 1:2:4 (40 mm graded stone aggregate) as in hard standing and footpaths complete all as specified and as directed. |
| 50 | Material and Labour for 25mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in finishing cement concrete surface even and smooth (without using extra cement) complete all as specified and as directed. |
| 51 | Material and Labour for cement concrete type D-2 1:4:8 (using 40 mm graded stone graded stone aggregate) as in sub base for tiling complete all as specified and directed. |
| 52 | Material and Labour Hard core of Broken bricksof gauge n.exc63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness all as specified and directed. |
| 53 | Supply and fixing 80 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-40 grade of approved shade with grey cement and pigment laid over 50mm thick sand cushion and filled with fine sandincluding removing old serviceable one complete all as specified and directed. |
| 54 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m depth; for fdn etc,or for shafts n.exc 10 sqm on plan in soft soilall as specified and as directed.all as specified and as directed.. |
| 55 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified and as directed. |
| 56 | Removing excavated materials n.exc 50M and depositing where directed at a level n.exc 1.5M above the starting pointall as specified and as directed. |
| 57 | Material and Labour for Salt-glazed stonewaredrain pipes 150mm borelaid in trenches and jointed as specified and as directed. |
| 58 | Material and Labour for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe, all as specified and as directed. |
