Tender For Construction Of Niabat Office At Achabal.
Tender Value
14.96 Lakhs
Estimated cost
Bid Submission
17 Mar 2025
0 days left
EMD
29920
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rafiabad → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Niabat Office At Achabal.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including dewatering (if any),getting out excavated earth and disposal of surplus excavated earth up to all leads and lifts. Complete Job |
| 2 | Providing and laying in position dry Nallah soling / Boulder filling with hand packing including carriage by Mechanical Transport / Manual Head Load (if any). Complete job |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 Mix (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) including carriage of ingrediants (mechanical / manual). Complete Job |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for:(a) Raft/Foundation/Plinth- upto plinth level |
| 5 | (b) Suspended floors, roofs, landings, balconies and access platforms |
| 6 | Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centering, shuttering and reinforcement with: 1:1.5:3 Mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage of ingrediants (mechanical / manual). Complete Job |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 Mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of ingrediants (mechanical / manual). Complete Job |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing and Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 10 | Filling available excavated earth in trenches, plinth, sides of foundations etc in layers incl ramming, watering etc complete. |
| 11 | Cement concrete flooring 1:2:4 mix finished with a floating coat of neat cement incl all carriages, complete. 50mm thick. |
| 12 | 12 mm thick cement sand plaster in 1:4 mix. Complete job |
| 13 | Providing and Fixing in position reinforcement steel incl. cutting and bending etc. Complete job. |
| 14 | Wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length, applying wood primer, wood preservatives and paint including cost of hold fasts and other necessities. Complete job. (KD Wood) |
| 15 | Providing and fixing glazed shutters for doors, windows and clearstorey windows using 4mm thick flaot glass panes with necessary screws, including cost of hinges, tower bolts, handle and necessary nails and screws etc. all complete as per the direction of Engineer-in-charge. 35mm KD wood |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors incl all necessary screws etc, complete job. 35mm KD wood. |
| 17 | Structural steel work in built up sections, trusses and framed work incl cutting, hoisting etc incl eaves boarding/soffits and priming coat, complete job. |
| 18 | Providing / fixing corrugated G. S. sheet roofing of 0.50 mm thickness including vertical/curved surface fixed with nails / washers etc. Complete job |
| 19 | Providing /fixing ridges or hips of width 60cm overall width plain G S Sheets incl hooks, bolts etc complete. |
| 20 | Providing and applying enamel synthetic paint of approved brand and manufacture on wood work to give an even shade (Two or more coats on new work) including single coat of wood primer. Complete job |
| 21 | Providing and laying vitrified floor tiles of different sizes in all colours and shades laid on 20mm thick cement mortar 1:4 incl grouting the joints with white cement and matching pigments atc complete job. |
| 22 | Providing and fixing Ist quality ceramic glazed Walltiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | RR Stone masonry with hard quary stones laid dry including all carriages up to all leads. |
| 24 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer |
| 25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 26 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints. |
| 27 | A. PN-16 pipe , 25 mm OD(SDR-7.4) |
| 28 | B. PN-16 pipe , 32 mm OD(SDR-7.4) |
| 29 | C. PN-16 pipe , 20mm OD(SDR-7.4) |
| 30 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 31 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards |
| 32 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, |
| 33 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereverequired : ,White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 34 | Providing and fixing of 25 litresgeysers specifications as per IS Standard. |
| 35 | Providing and fixing water closet squatting pan (Indian type W.C. pan/European as required ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 36 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 37 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 38 | Providing and fixing ball valve (brass 25 mm) of approved quality, High or lowpressure, with plastic floats complete |
| 39 | PVC conduit of 1\"\" diawith assorted fitting of bends, tees, juction boxes,saddles clamps wooden gut ties screws/Nailsetc. |
| 40 | P/f of M.Sfan box of standard quality and make. |
| 41 | P/f of round junctionbox with plate for lighting point. |
| 42 | P/f of Towel rods incld. necessary accessories and all costs/ carriages |
| 43 | SITC of 09 lighting points incl Led Lights,04 heating points,02 No Fans,01 no exhaust Fan etc etc incl c/o all accessories,wires,MCB Junction board etc as directed by site engineer |
AI Tender Summary
Tender Timeline
Mar 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 17, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 18, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender