Tender For Supply Installation Testing And Commissioning Of The Hot And Cold Acs In Various Locations Of Govt. Bj Hospital, Srinagar, srinagar-Jammu And Kashmir

Tender For supply installation testing and commissioning Of The Hot And Cold Acs In Various Locations Of Govt. Bj Hospital, Srinagar- 1 Supply, Installation, testing, and commissioning of Hot and Cold DC inverter Type Split AC Unitcomprising of indoor and outdoor units with R-410A/32A Refrigerant (Green Gas) having twin rotary compressor, indoor Motor, Outdoor Motor, Expansion Valve and a remote-control unit with allied accessories. ACshould be suitable for operation on 50 Hz single Phase AC Supply both the indoor and outdoor units shall be installed on wall and wall/floor brackets respectively as per requirement to hold the units and should be complete with all default accessories as per OEM like Hooking arrangements, Fixtures, frames for holding indoor and for resting outdoor units, Drainage Piping etc .The capacity shall be 1.76 / 2.0 TRand shall have specifications as per annexure B.The price is exclusive of cabling,copper tubing and nitrile foam 2 Supply, Installation, testing, and commissioning of Hot and Cold DC inverter Type Split AC Unitcomprising of indoor and outdoor units with R-410A/32A Refrigerant (Green Gas) having twin rotary compressor, indoor Motor, Outdoor Motor, Expansion Valve and a remote-control unit with allied accessories. ACshould be suitable for operation on 50 Hz single Phase AC Supply both the indoor and outdoor units shall be installed on wall and wall/floor brackets respectively as per requirement to hold the units and should be complete with all default accessories as per OEM likeHooking arrangements, Fixtures, frames for holding indoor and for resting outdoor units, Drainage Piping etc .The capacity shall be 1.4 / 1.5 TRand shall have specifications as per annexure B.The price is exclusive of cabling,copper tubing and nitrile foam 3 Providing, Fitting, Testing and commissioning of below SizedCopper tubing along with jointing, bending etcfor liquid flare and gas flare and duly insulated by Elastomeric nitrile rubber along with fixtures, saddles, ties etcwith dimension of copper tubing as below: 4 Minimum 6.35 mm Dia/AS RECOMMENDED BY OEM. 5 Minimum 12.7 mm Dia/AS RECOMMENDED BY OEM. 6 SITC of 5kvaCopper wound automatic voltage stabilizer single phase with high cut and low cut & allied safety/protections, wall mounted designed at input voltage range of 150-220 volts and output voltage range of 220-240 volt along with the wall mounting brackets and necessary fittings. The job encompasses carrying out repairs to the walls wherever the same are cut. the stabilizer shall have digital meter showing input, output voltage and load of the AC. the item shall confirm to IS 8448 (1989). 7 Providing, laying and fitting ofFRLS (flame retardant low smoke) 2.5 sqmm 4 core with [Communication cable] insulated unarmored sheathed copper cable. The item shall confirm to IEC 60502 and IS-694:2010 8 providing and laying of 20 mm PVC conduit/channel with flexible Conduit wherever required along with fixtures,bends,junction box union, saddle wherever applicable. 9 Providing and fitting of 2 pole 32-amp c-curve type MCB 01 one and 01 no32 Amp single pole MCB with Circuit Breaking Capacity, Icn=10kAinside Powder Coated MS Enclosures to be fitted for each for AC unit. The item shall confirm to is/IEC 60898 and IEC 60947-2. 10 Providing and fitting of 16 Amp ISI marked 3 Pin,2-Pin Switch- Socket with on/Off Switch SSCombine along with 16 Ampere 3-Pin Top arrangement including all fixtures. 11 Providing, laying and fitting ofFRLS(flame retardant low smoke) 4.0 sqmm SINGLEcore, insulated unarmored sheathed copper cable. The item shall confirm to IEC 60502 and IS-694:2010

INR 200 /-

INR 8800.0 /-

INR 4.40 Lakhs /-