|
| 1 | Fumehood and Accessories : |
| 2 | PP CUPSINK 3x6x4 |
| 3 | FUMEHOOD MICROPROCESSOR BASED AIRFLOW MONITOR AND ALARM -VERTICAL - C/W SM7 SENSOR, SUITABLE POWER ADAPTOR |
| 4 | REAR SCRIBE-18Hx00Dx5L, H=HEIGHT UP TO FALSE CEILING |
| 5 | REAR SCRIBE-35Hx00Dx18L |
| 6 | REAR SCRIBE - 57Hx00Dx05L |
| 7 | BASE MOLDING 4 FT. |
| 8 | FUMEHOOD ELECTRICAL SYSTEM-2+2 NOS 6/16A SOCKETS WITH SWITCH, 1 NO 4FT NON-FLAME PROOF LIGHT FIXTURE ALONG WITH LED & 15 INTENSITY WITH 3 COLOR SETTINGS CONTROL SWITCH, 1 No FUMEHOOD DB AND INTERNAL WIRING WITHIN THE HOOD |
| 9 | FUMEHOOD FRONT CONTROL VALVE FOR COMPRESSED AIR |
| 10 | FUMEHOOD FRONT CONTROL VALVE FOR NITROGEN |
| 11 | FRONT CONTROL VALVE FOR RAW WATER |
| 12 | FUMEHOOD FRONT CONTROL VALVE FOR VACUUM |
| 13 | FUMEHOOD SS304 INTERNAL TUBING UNTIL 150MM ABOVE THE HOOD WITH CAPPED END (1/2 FOR RW, VA, 1/2 WITH INSULATION CWI, CWO, 1/4 FOR N2, CA) |
| 14 | BASE UNIT FH SOLVENT 2 DOOR-35Hx22Dx36L |
| 15 | BASE UNIT FH ACID 2 DOOR-35Hx22Dx36L |
| 16 | FLOOR STANDING WORKTOP SUPPORT OF SIZE:36Hx08L |
| 17 | 6 FEET BENCHTOP HOOD, COMBINATION SASH, SASH OPENING 28\", 30\" INTERNAL DEPTH, 72\" LENGTH, PHENOLIC RESIN LINER, WITH INSERT TYPE WORKTOP |
| 18 | 6 FT FUMEHOOD CEILING ENCLOSURE WITH ACCESS DOOR, SIZE:18H x 30D x 72L, CF=FOR COMBINATION SASH HOOD, H=HEIGHT UP TO FALSE CEILING |
| 19 | EPOXY LATTICE ASSMBLY FOR 6’ BENCHTOP FUMEHOOD |
| 20 | 6 FEET BENCH TOP FUMEHOOD INSERT TYPE GRANITE WORKTOP. |
| 21 | Centrifugal Blowers and Motor:- Medium Pressure Direct Driven PP Centrifugal Blower CMVeco315/280 (1600-2600cfm @ 30-140mm static), with clamp adapter, Electro galvanized stand base frame and fasteners. Refer Cluster details. |
| 22 | G1 M8x50 bolts with nuts & washer (Motor and Blower pedestal) |
| 23 | Vibration Isolators for CMMV-315/280 |
| 24 | M10x100 pin type anchor fasteners |
| 25 | Motor 3.7KW/2P(5HP/2P) TEFC B5/Flange mounted 3phase 50Hz, IE2.Terminal box should be on top side. Motor Shall be compatible for VFD Operation. Refer Cluster details. |
| 26 | PP Weather cowl Dia 350 mm. (1.48 sqm). |
| 27 | MS Stack support for CMVeco-315/280 Model, (Kg: - 90 Kgs ). |
| 28 | Motor Guard with accessories for 5HP, refer motor capacity. |
| 29 | 25x25x14g thk PP Bird mesh for dia 250 mm Bypass end connection, refer drawing. |
| 30 | Dia 315 mm and 3mm thickness PVC Transparent flexible connection for inlet & outlet of the blower, refer cluster details. |
| 31 | PP-FRP Ducting and Accessories - PP-FRP ducting using 3mm thick PPGL sheets 3 mm thick FRP lining using isothelic resin including flanges & bends, gasket, support with threaded rod, clamps, anchor fasteners, washer nuts and bolts and UV resistant painting. |
| 32 | MS Support for Ducts like threded rod,anchor bolts,c-chanels, clamps,angles,bolts & nuts. Inside lab, within Shaft & outside the building. |
| 33 | PP moulded 300mm dia. single leaf Butterfly Manual damper with Both side flanges.Refer drawing. |
| 34 | PP moulded 250mm dia. single leaf Butterfly Manual damper with Both side flanges.Refer drawing. |
| 35 | Fumehood Base cabinet vent connection & Accessories |
| 36 | 40 mm PP Slip x Slip x Slip Tee |
| 37 | 40mm CTS Slip x MPT Male Adapter 2\" with Chuck Nut |
| 38 | 40mm CTS 90-Degree Slip x Slip Elbow |
| 39 | 40mm. x 3000mm PP Exhaust Pipe |
