|
| 1 | Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete. |
| 2 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. |
| 3 | Providing and casting in situ Cement Concrete of trap/ granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineerin- charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)For all types of Columns2) In RCC M-200 |
| 4 | Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase2) In RCC M-200 |
| 5 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259)Lift 0 to 1.5 M |
| 6 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in- charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)Lift 0 to 1.5 M |
| 7 | Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F- 17/306)Corrosion Resistant Steel (Fe 500) |
| 8 | Tor Steel |
| 9 | Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. Note : Only SBR Rubber gaskets to be used as per. Only 85 % rate shall be payable till satisfactory Hydraulic testing is given.b)) C.I. ‘L.A.\" Class / Mortar inlined DI K-9/K-7 Without Rubber Rings With Rubber Rings2) 100 mm. |
| 10 | Providing and supplying ISI standard C I flanged / S& S specials excluding GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store /site, unloading stacking etc. complete.b)) S /S Specials / S ocketed B ranch F langed S pecials1) 80 to 300 mm dia |
| 11 | c)) Plain ended/ plain ended branch flanged specials1) 80 to 300 mm dia |
| 12 | Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. Providing and supplying ISI standard welded DI doublea)) 80 to 300 mm dia. |
| 13 | H ydraulic testing of C .I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor.b)) With Rubber Rings2) 100 mm. |
| 14 | P roviding D .I. p ipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi- tion/revision with amendments for Rubber Gaskets. Note: For DI pipe supply from MJP 18% GST would be applicable. Same should be considered for estimation purpose.b) ( IS:8329-2000 Latest Version) D.I. K-91) 100mm |
| 15 | Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259)Lift 0 to 1.5 M |
| 16 | Excavation in laterite rock masses mechanically, including lift upto 1.5 M including trimming and levelling the bed removing the excavated material upto a distance of 50 metres beyond the area and lift as below stacking by as directed by Engineer-in-charge, normal dewatering excluding backfilling, etc. complete. .Lift 0 to 1.5 M |
| 17 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)Without by pass arrangement - PN -1.64) 100 mm. |
| 18 | Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed.100 mm dia |
| 19 | 150 mm dia |
| 20 | Add for every additional lift beyond initial lift of 1.5 M for Item Nos. 5 to 10 |
| 21 | Supply of C. I . Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993.100 mm dia |
| 22 | 150 mm dia |
| 23 | Supply of CI Mechanical joint Double Socket with Flanged Tees dimensionally described in Table -19 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R.( dimensionally described in IS-12820/ 1989) with cast iron follower gland and mild steel nut bolts coated or galvanised coated or otherwise protected from rusting and suitable for C. I. pipes100x100x100 mm dia |
| 24 | 150x150x100 mm dia |
| 25 | Supply of CI Mechaincal joint Double Socket Reducers as described in Table -21 of IS - 13382/1992 complete with sealing rubber gasket of SBR( dimensionally described in IS-12820/ 1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.100x80 mm dia |
| 26 | 150x100 mm dia |
| 27 | Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 28 | Add for every increase in depth of 30 cm or part thereof |
| 29 | WM 2 Ultrasonic / Electromagnetic Water Meter B) AMR Bulk Meters Providing,installing testing and commissioning of in line battery operated ultrasonic bulk type water meters ISO 4064 with built in data logger and GSM/GPRS modem for transfer of data communication to remote central computer as per working on following conditions and specifications.The meter shall be suitable for 50oC and provided with IP 68 protection class with complete immersion of water.The meter shall have battery life of min.10 years should be able to detect the reverse flow volume and tampering.The accuracy of the meter shall be +/- 1 % of measured value including 36 months guarantee etc complete.( With Simcard and its charges,valid for 36 months) 3) 100 mm dia |
| 30 | Loading & Un loading the pipe -100mm dia D.I.K -7 class FROM MIDC STORE at Beed to Site Of work at DHARUR @ 70.0KM Rate Rs. 121+121 = Rs.242/ Per MT |
| 31 | Provision for electric power supply connection & cable/wire |
| 32 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 33 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Sq.m as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 34 | Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stagesPM 1-2-7) 7.5 HP |
| 35 | 3 core PVC insulated, PVC sheathed copper conductor flat submersible cableSupplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.CB 1-6) 3 core 16 sq mm |
| 36 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 37 | Supplying, erecting, testing and commissioning of soft starters for three phase, 415 V, A.C. supply water pump upto 15 HP consisting of RS-485 communication port, compact size & range, internal bypass contactor, 400% max. allowed overload of nominal current, with compatibility with teleservice software \"remote drive\" on internet, having protection for motor overload, phase sequence, excess start time, phase loss, power circuit fault, supply frequency, communication failure etc. complete. |
| 38 | Supplying, erecting, testing and commissioning of directly operated single phasing preventer complete erected and connected to supply to operate in case of single phasing with guarantee for minimum one year. |
| 39 | Carrying out below mentioned tests on CEMENT as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Standard Consistency Fineness, Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness |
| 40 | Carrying out below mentioned tests on WATER as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. PH Value, Sulphate & Chloride Content |
| 41 | Carrying out below mentioned tests on CRUSHED SAND as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete. Fineness Modulus (Sieve Analysis), Silt & Clay Content |
| 42 | tests on CRUSHED SAND -Silt Factor |
| 43 | CRUSH SAND Chloride & Sulphate Content |
| 44 | Provision |
