|
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed. |
| 2 | Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 3 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 4 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 5 | Rendering 15mm thick in Cement and Sand mortar 1:4 overfair faces of brick / concrete ,finished even and smooth without using extra cement, including using water proofing compound, including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified.Note : WPC shall be measured and paid separately. |
| 6 | Rendering 15mm thick in Cement and Sand mortar 1:6 over fair faces of brick/concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and directed. |
| 7 | Rendering 5mm thick in cement mortar 1:3on fair faces of concrete surfaces as in ceilings , finished fair and smooth, complete all as specified and directed. |
| 8 | Dubbing out average 20mm thick on irregular faces of walls, exposed reinforced surfaces, in Cement and Sand mortar 1:4 complete all as specified and directed |
| 9 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 10 | Dismantling floor hearth or wall tiling including cementmortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 11 | Glazed ceramic coloured tiles of size 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over and including 10mm thick bedding layer in CM 1:4complete all as specified and directed. |
| 12 | Non skid ceramic coloured tiles7 to 8 mm thicksquare/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed. |
| 13 | Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 14 | Taking down chowkhats or framen.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 15 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame,complete all as specified and directed. |
| 16 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 17 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge |
| 18 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 19 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed. |
| 20 | Solid PVC board 20mm thick, with 2mm thickprelam PVC sheet on the front face & 2mm relam PVC sheet on back with particle board core fixing in frame at site to cup board sgutter, sheleves and kitchen cabinet complete all as specified and directed. |
| 21 | Continuous (piano) hinges, mild steel bright finish, width of flap when open30mm,complete all as specified and directed. |
| 22 | 100mm hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 23 | PVC body magnetic shutter catcher for kitchen cup boards, fixed with standard steel screws, complete all as specified and directed. |
| 24 | 100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed. |
| 25 | D\" type, 100mmExtruded aluminium alloy handle fabricated typecomplete all as specified and directed. |
| 26 | 100 mm size aluminium , barrel tower bolt of extruded section complete all as specified and directed. |
| 27 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. |
| 28 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 29 | Powder coated aluminium grill (minimum thickness of powder coating 50 micron) of approved design / pattern (Apprature of grill should not be more than 75mm) with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening , including aluminium ‘U’ channel and all necessary fitting complete all as per requirement of Engineer-in-Charge. |
| 30 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples,complete all as specified & directed. |
| 31 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples,fixed as in repair complete all as specified & directed. |
| 32 | 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 33 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square exc 0.5 Sqm in each panes,including hacking out old broken glass complete all as specified and directed. |
| 34 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; manhole cover; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe 165-0,as in repair all as specified and directed. |
| 35 | Mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required,as in repaircomplete all as specified and directed. |
| 36 | Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 37 | Preparation of old steel surfaces of any description over 10cm width or girth and applying one coatof synthetic enamel paint complete all as specified and directed. |
| 38 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coatof synthetic enamel paint complete all as specified and directed. |
| 39 | Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. |
| 40 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. |
| 41 | 30mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides etc. complete all as specified and directed. |
| 42 | Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause8.20 (a) including Kiln seasoned and chemically pressure treated,complete all as specified & directed. |
| 43 | preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 44 | 150 mm size aluminium , barrel tower bolt of extruded section and complete all as specified and directed. |
| 45 | D\" type, 150mmExtruded aluminium alloy handle fabricated type,complete all as specified and directed. |
| 46 | Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 47 | 300mm mild steelordinary rat tail rod pattern spring including roller and roller plate, including welding on chowkhat complete all as specified and directed. |
| 48 | 25mm dia stainless steelcurtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 49 | Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbishall as specified & directed by Engineer-in-charge. |
| 50 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 51 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base finished fair and even without using extra cement, complete all as specified and directed. |
| 52 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge. |
| 53 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth , complete all as specified and directed. |
| 54 | Removal of excavated material to distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed. |
| 55 | HDPE double wall corrugated (DWC) pipes (ISI Marked) 150mm SN-8 class as per IS 16098 Part -II for non pressure underground drainage and sewage applications with speials including cost of special O rubber rings couplers etc, laid in trenches on concred bed to level / gradient, jointing with appropriate class fittings as per manufacturer\"s instructios including jointing accessories and fittings complete all as specified and directed. |
| 56 | Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, hold fast, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge. - NOTE : (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. |
| 57 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc complete all as specified & directed. |
| 58 | PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels, benching and drains complete all as specified and directed. |
| 59 | Plain cement concrete, type C-2, 1:3:6, using 40mm graded crushed stone aggregate as in bed to drainpipe including packing under pipes and testedafter the pipe are laid, complete all as specified and directed. |
| 60 | Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas, shelves and similar suspended work, including cutting of reinforcement to facilitate demolition and removal of debris , complete all as specified and directed. |
| 61 | pre-cast reinforced cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in cover slab of shaft at roof level in four storey buildingetc set in cement mortar 1:4,complete all as specified and directed. |
| 62 | Demolition of 25mm thick RCC louvers / jalli in shaft & other similar placeand removal of debris, including all necessary scaffolding and safety arrangementcomplete all as specified and directed. |
| 63 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed. |
| 64 | Complete removal of existing wall treatement (internal / external surface)upto & including 4 storey building complete all as specified and directed. |
| 65 | Applying Wall care putty (average thickness 1-2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 66 | Preparation of new surfaces of any description of wall, facia, ceiling, RCC / surface prepared under item No 63 etc and applying two coats of oil bound destemperi complete all as specified and directed. |
| 67 | Finishing walls with Acrylic Smooth exterior paint of required shade,on new work/ surface prepared under item No 63 (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 68 | Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed brick aggregate as in sunken filling and mass concrete complete all as specified & directed. |
| 69 | Wire brushing and cleaning top surface, terrcing or cement concrete , including flashings and junction of parapet etc and 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructionsincluding dismantling of existing felt /treatment, complete all as specified & directed. |
| 70 | Preparing surface of wall and applying 15mm thick cement plaster in 1:4 cement sand mortar mixed with integral water proofing compound in wall surface including applying two coats of Epoxy Resin coating Polymer modified cementation coating like brush bon of Fosroc, Asian paint, Pidilite and Bostic as per manufacturers inductions as on wall surface (shaft area), upto 4 storey building including all necessary scaffolding and safety arrangement complete all as specified and directed. Note : Above coated rates are inclusive of liquid water proofing compound and epoxy rasin |
| 71 | Preparation of wall or similar surface by removing all loose material, clean by wire brush and water, applying two coats of dampproof component, sure seal (Dr Fixit) or equivalent as per manufacturer instruction. Applying the component by brush 1.10kg/sqm for each coat, second coat in perpendicualr direction to first coat and after 4-6 hour dry of first coat, complete all as specified and directed. |
| 72 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 73 | Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 74 | Two coats of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed. |
| 75 | PVC (SWR) floor trap 100mm bore, plain with grating includingjointing to waste pipe jointed and setting/fixed in cement concrete type B-1, 1:2:4 , fixed as in repair complete all as specified and directed. |
| 76 | PVC (SWR) floor trap \"P\" type 100mm bore, plain with grating includingjointing to waste pipe jointed and setting/fixed in cement concrete type B-1, 1:2:4 , fixed as in repair complete all as specified and directed. |
| 77 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP waste coupling, angle brackets, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 78 | Vitreous china, wash down water closet pan, white, pedestal pattern with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed. |
| 79 | Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed. |
| 80 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 81 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 82 | Taking down and refixing in repair of Wash hand basin, vitreous china, flat back,with waste coupling, angle brackets, PVC waste pipe, complete all as specified and directed. |
| 83 | Taking down and refixing in repair of Vitreous china, wash down water closet pan, white, pedestal pattern with ‘P’ or ‘S’ trap, (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed. |
| 84 | Taking down and refixing in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor,complete all as specified & directed. |
| 85 | PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. |
| 86 | Towel rail 600mm long ofCP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 87 | Towel ring ofCP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 88 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 89 | Taking up ordown steel tubingand connections 15mm bore, complete all as specified and directed. |
| 90 | Taking up ordown steel tubingand connections 20mm bore ,complete all as specified and directed. |
| 91 | Taking up ordown steel tubingand connections 50mm bore ,complete all as specified and directed. |
| 92 | 16 mm (outer dia) CPVC pipes,SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors,complete all as specified. |
| 93 | 20 mm (outer dia) CPVC pipes,SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors,complete all as specified. |
| 94 | 25 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed. |
| 95 | 50 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors , in complete all as specified and directed. |
| 96 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified |
| 97 | Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore iron pipe , fixed as in repair complete all as specified. |
| 98 | Bib tap brass, fancy type, long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 99 | Taking down and refixing in repair Bib taps brass, suitable for 15mm bore pipe,complete all as specified and directed. |
| 100 | Two way Bib tap brass, fancy type, (incl fixing arrangement of health faucet) long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 101 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down,screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 102 | Wall mixer system with L bend incl provn of over head shower, cast copper alloy , chromium plated screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 103 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 104 | Taking down and refixing in repair wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe,complete all as specified and directed |
| 105 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long, fixed as in repaircomplete all as specified and directed. |
| 106 | Cast copper alloy, chromium plated, fancy type shower rose with swivel joints 125mm dia including fixing to CPVC pipe 15mm bore, fixed as in repaircomplete all as specified and directed. |
| 107 | 25mm bore Union, brass to connect iron to polyethylene and fixed, fixed as in repairs complete all as specified and directed. |
| 108 | Cutting holes of superficial area n.exc 150 Sqcm and depth upto 30 centimeter into or through brick wall built in cement mortar/ RCCChajjas, surfaces etc with core cuttingmethod and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as requiredafter fixing of mild steel pipe sleeves in wall / slab as required complete all as specified and directed. Note : MS sleeve shall be measured and paid separately. |
| 109 | Supply and laying 125mm galvanised steel tubes, medium grade uto to suitable length for sleeve fixed to wall or RCC slab to pass plumbing pipe trhrough wall / ceiling or RCC slab complete all as specified and directed. |
| 110 | PVC(SWR) rain water pipe, 110mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 111 | PVC(SWR) rain water pipe, 75mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 112 | PVC(SWR) rain water pipe, 110mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 laid in trenches or in floor etc, fixed as in repair complete all as specified and directed. |
| 113 | PVC(SWR) rain water pipe, 75mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 laid in trenches or in floor etc, fixed as in repair complete all as specified and directed. |
| 114 | 110 mm bore PVC (SWR) bends with acceess doorcomplete, all as specified and directed. |
| 115 | 75 mm bore PVC (SWR) bends with acceess doorcomplete, all as specified and directed. |
| 116 | 110mm borePVC (SWR) junction single, (Single T/ Y) equal or unequal, with access door complete all as specified and directed. |
| 117 | 75mm borePVC (SWR) junction single, (Single T/ Y) equal or unequal, with access door complete all as specified and directed. |
| 118 | 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 119 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complet all as specified and dircted. |
| 120 | Plain cement mortar 1:3:6 (type C-2 using 20mm graded aggregate), 75mm thick as in Plinth protection , finishing cement concrete even and smooth without using extra cement,all as specified.Note: 10mm construction joint will be provided and panel should not be more than 3metre in length and joint filled with filler bitumen and sand in ratio (1:3) |
| 121 | Rendering 20mm thick in CM 1:4 over brick tiles surface, including racking and cleaning of brick tile joint & made surface free from vegetation including flashings and junction of parapets etc and adjoining vertical surfaces and applying protective coating with “FOSROC BRUSHBOND” additives powder mixed together with liquid component of blended acrylic co-polymets and wetting agents. The total dry film thickness of coating shall not less than 2mm and shall be capable to providing resistance to wear and weather and good chemical resistance to mild in-organic acid solution, diesel oil, gasoline, chlorides, deicing salts, effluents and organic solvent all as per manufacturer instruction by “FOSROC BRUSHBOND / DR FIXIT” complete all as specified and directed.NOTE :1. rates are applicable upto 4 storey building 2. Make and application process shall be approved by GE.3. All stage will be passed by GE. |
| 122 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. |
| 123 | Disconnecting existing tanks exc 500 and n.exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified & directed by Engineer-in-charge. |
| 124 | Dismantling ofwall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 125 | Providing & fixing hangers of 6 mm dia. aluminium (upto 1200mm length), adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat of 40 x 3 mm size, 60mm long and expansion hold fasteners of 12.5mm dia, 40mm long with and including anodised aluminium snapgrid of size 605mm x 605mm, framed work for false ceiling with and including 4mm thick nonasbestos fibre cement building boardsfixed in aluminium framework with screws, complete all as specified and directed |
| 126 | Demolition of stone slabs and tiles of any description or thicknessin floors laid, bedded and pointed in any mortarincluding disposal of demolished materialcomplete all as specified and directed. |
| 127 | Kota Stone Slab flooring, 16-18mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. |
| 128 | All as per serial item No 127 hereinbefore but on skirting / vertical surfaces laid over and including 10mm screed layer in cement mortar 1:3, cutting, rubbing, grinding and polishing complete, all as specified. |
| 129 | 20mm thick Granite work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite compelte all as specified and directed. |
| 130 | Sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 430mm bowl size 430mm x 380mm x 203mm fixed as in repair compelte all as specified and directed. |
| 131 | Plate rack of stainless steel of size 610mmx 914mm x 254mm with steel shelves and hanging arrangements for utensil, fixed as in repaircomplete all as specified and directed. |
| 132 | Note : 1. Before commencement of any work inside / outside of bldg. Complete double steel scaffolding shall be carried out in wall adjoining to toilet / kitchen /bath/ shaft are for safety of labour and execution work . The same shall be certified by GE / Concerned Engineer-in-Charge before commencement. No extra cost shall be paid on this account. Steel scaffolding will only be removed after testing of sanitary fitting/ leakage / seepage.2. Complete sanitary / plumbing work shall be got tested for pressure test/ smoke test/leakage seepage test before concealing of pipes.3. Dismantling of all existing CI pipe and fittings shall be carried out by core cutter of required size/ using any mechanical method without disturbing the existing RCC structure / brick wall. Any damages made to the structure shall be make good by the contractor using the standard engineering practice without any extra cost. |
