Tender For Repair Of Court Complex At Payal Luhdiana (Courtroom At Ground Floor).
Tender Value
7.67 Lakhs
Estimated cost
Bid Submission
12 Mar 2025
0 days left
EMD
15348
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
payal → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Court Complex At Payal Luhdiana (Courtroom At Ground Floor).
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work:Scrappng |
| 2 | Dismantling concrete |
| 3 | Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50Metres lead |
| 4 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. |
| 5 | Finishing walls with PremiumAcrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @1.43litre/10Sqmover and including base coat ofwaterproofingCement Paint applied @ 2.20 Kg/10 Sqm |
| 6 | Cement concrete 1:3:6 |
| 7 | Preparation of plywood surface for paintingincluding sand papering the surface andapplying filling with approved quality fillersconsisting of white lead, linseed oil, Varnish,and Chalk Mitti including finishing the surfaceto required finish complete. |
| 8 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbingdown old paint. |
| 9 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 10 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 11 | Providing and fixing1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approvedmake in all colours, shadesexcept burgundy, bottlegreen, blackof size 600x300mm as approved byEngineer-in Charge in skirting, risers of steps and dados over 12mm thickbedofcementMortar1:4(1cement: 4 finesand)andjointingwithgreycementslurry @3.3kg per sqm including pointing in white cementmixedwithpigment ofmatchingshade complete. |
| 12 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 13 | Providing and fixing commercial plywood12mm thick. |
| 14 | Hollock wood cup board shutter with plywoodpanelsorfacedonbothsidefixed inposition(excludingthecostofhandles, bolts haspwith staple but including the labour for fixing them) |
| 15 | Kail wood planking planed on both sides rebated and fixed in position including nails and screws etc. |
| 16 | Providing & fixing 6\" stainless steel tower bolts ISI marked on door& window frames complete in all respect as per the directions of Engineer-in-charge. |
| 17 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppersandscrewetc. for these fittings (Excluding sliding bolt) |
| 18 | Curtain rod 25mm dia aluminum pipe with brackets fixed inposition includingnails and screws etc. (Teak Wood) |
| 19 | Washing |
| 20 | Dry Cleaning |
| 21 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 |
| 22 | Public Health:Repair of 15 No. Air Conditioners:Replacement of Compressor of 2 Tonne Split type Air Conditioner including cost of material, labour, carriage and Refrigerant Gas recharging etc complete in all respect |
| 23 | Replacement of Compressor of 1.5 Tonne Split type Air Conditioner including cost of material, labour, carriage and Refrigerant Gas recharging etc complete in all respect |
| 24 | Full Refrigerant Gas recharging of Air Conditioner |
| 25 | Half Refrigerant Gas recharging of Air Conditioner |
| 26 | Replacement of contactor of Air Conditioner |
| 27 | Repair of PCB of Air Conditioner |
| 28 | Replacement of Fan motor of Air Conditioner |
| 29 | Repair/ Rewinding of Fan motor of Air Conditioner |
| 30 | Full Service of Split type Air Conditioner without dismantling indoor unit |
| 31 | Full Service of Split type Air Conditioner including dismantling indoor unit |
| 32 | Full Service of Window type Air Conditioner |
| 33 | Shifting of air coditioner split type including labor and material complete. |
| 34 | Shifting of air coditioner window including labor and material complete. |
| 35 | P/F copper pipe 5/8 inch |
| 36 | P/F copper pipe half quarter |
| 37 | Repair of Fire Extinguishers:Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect. C) 6 Kg Capacity |
| 38 | Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect. c)4.5 Kg Capacity |
| 39 | Providing and fixing of FIRE EXTINGUISHER, CO2 stored Pressure type as per IS: 15683 complete with all accessories and Ceiling Stand as per Manufactures Specification. 9 Kg Capacity |
| 40 | Providing and fixing of FIRE EXTINGUISHER, ABC stored Pressure Modular type as per IS: 15683 complete with all accessories as per Manufactures Specification.10 Kg Capacity |
| 41 | Providing and fixing G.I. Fire Bucketincluding cost of painting etc complete in all respect. 9 Litre Capacity |
| 42 | Providing and fixing Fire Bucket Stand for four buckets including cost of painting etc complete in all respect. |
AI Tender Summary
Tender Timeline
Mar 06, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMar 12, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender