Name of Work: Internal Wiring in APF 12 X 80 Mtr. 02 No. At SMY Malihabad Lucknow.
Sl. No.
Item Description
1
Supply and fixing ofrecess/surfacemounting round24 Watt to 32 WattLED Down Lighter having Powder coateddie cast aluminium housing withextended heat sink, diffuser/ Reflector and driver set completed in all respects.
2
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
3
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
4
S/F of 6 amp to 32 amp MCB (10 KA) CCurve. Cat A
5
S/F of 6 amp to 40 amp DP MCB (10 KA) CCurve. Cat A
6
S&F surface/flush mounting 4 ways SPN distribution board without MCBcomplete in all respect,as directed at site byEngineer in charge.
7
S/W of submain with 2 No. 2.5 sqmm. PVC insulated1100 V Multistand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit on surface with one number 1-5 sq. mm. PVC insulated Copper conductor cableas earth continuity wire drawn in conduit.
8
S/L of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer –Incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.6 Sqmm.x 2 core
9
16 Sqmm.x 4 sqmm
10
Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP65 and aboveProtection complete in all respect.
11
Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountendon non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.Incoming 100 Amp. TPN-1 No Outgoing63 Amp. TPN-1 No and 32 Amp. TPN-2 Nos.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
