|
| 1 | S/F of surface / flush mounting 4 ways SPN distribution board with additional metal door without MCBs complete in all respects and as directed at site by engineer incharge. |
| 2 | S/F of surface / flush mounting 4 ways TPN distribution board with additional metal door without MCBs complete in all respects and as directed at site by engineer incharge. |
| 3 | S/F of 6 to 32 Amp. SP MCB (10KA) C Curve |
| 4 | S/F of40 Amp. DP MCB (10KA) C Curve |
| 5 | S/F of63 Amp. 4 PoleMCB (10KA) C Curve |
| 6 | Supply and burring of Safe Earthing Electrode T-39, ( Hot Dip Galvanized), Length up to 3000mm, outer door pipe 76mminner Dia 38 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive propertywith 50 kgs activatedsoil(BFC) capable of reducing the soil resistivity with good mixture of retainingcapacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (from apron to switch board, of 25mm x 3mm G.I. stripwill be extra) make as App. in UP PWD & CPRI Certified |
| 7 | S/F of one number 8 SWG copper wire in 15mm dia G.I pipe for Earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. |
| 8 | Supply and wiring of sub main with two number 4 sqmm. FRLSH PVC insulated 1100 V grade single core multistrand single core copper conductor cable in 20mm dia heavy PVCconduit on surface,and partly laid in slab alongwith the reinforcement before concreting, complete with 2.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable as earthwire drawn inside the conduit,including matching color wash etc. complete in all respects. |
| 9 | S/F of IP 20, Mid Power SMD type LED Light 1\"\"X1\"\" square shaperecess/surface mounting round 18 watt to 20 watt LEDlighthaving powder coated die cost aluminiumhousing with heat sink, High purity / transmisivity, UV Stablized Non yellowish duffuser/reflector for uniform light distribution,detachable driver set, suitable for 24 Hr Continuous operation, complete in all respect. 2160-2400 system lumens, 120lm/W, PF>0.95, THD<10% at full load CRI>80, >300v over voltege protection, 205KV internal surge Protection with 5years warantee. |
| 10 | S/L of6 Sqmm2 Core Al Conductor PVC insulated armoured sheathed cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M. clamps etc. of suitable size or as directed the Engineer- incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 11 | S/L of16 Sqmm4 Core Al Conductor PVC insulated armoured sheathed cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M. clamps etc. of suitable size or as directed the Engineer- incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 12 | S/L of Al Conductor PVC insulated armoured sheathed cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M. clamps etc. of suitable size or as directed the Engineer- incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (1) 120 Sqmm 3.5 Core |
| 13 | S/F of LED street light fittingwith Mandatorydriver sethaving die cost aluminium body and lenses suitable for 75 to 90 watt. Conforming to IP 66 & IK07 & aboveprotection having Co. LOGO Engravedcomplete in all respect.including labour CAT AAA. 9000-10800 system lumens, high power LED with lenses, >120lm/W, PF>0.95, THD<10% at full load, CRI>70 potted driver set in Metal housing (not circuitory) phase to phase protection at 440V & 300V auto cut & restartfeature with 5years warantee |
| 14 | S/F of 32 Amp. 240V SPN metal clad rewireable type switch fuse unit on MDFEG/ Teak wood board complete in all respects. |
| 15 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respects. |
| 16 | S/F of Cubical box dust and vermin proof 2/3/4way distribution box 16 SWG M.S sheet of 1.5mm thick with the suitable size of copper bus bar 3 Nos. 500 AMP cut out unit as incoming inside locking arrangement handle danger plate etc. I/c two coats of approved quality paint the job including all material labour T&P suitable foundation for mounting the bars etc. complete in all respects. (Sanctionedby mandi Parishad) |
| 17 | Supply and fixing of120 Sqmm palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per direction of the Engineer-incharge. |
| 18 | Supply and fixing of 16 Sqmm palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per direction of the Engineer-incharge. |
| 19 | S/F of 100Amp. 415V metal clad TPN rewireable type switch fuse unit on angle iron bracket complete in all respects. Cat B |
| 20 | S/F of LED street light fittingwith Mandatorydriver sethaving die cost aluminium body and lenses suitable for 75 to 90 watt. Conforming to IP 66 & IK07 & aboveprotection having Co. LOGO Engravedcomplete in all respect.including labour CAT AAA. 13200-15600 system lumens, high power LED with lenses, >120lm/W, PF>0.95, THD<10% at full load, CRI>70 potted driver set in Metal housing (not circuitory) phase to phase protection at 440V & 300V auto cut & restartfeature with 5years warantee. |
| 21 | S/I/T/Cof LT Panel vermin proof floor mounting MS Chanel base with bottom & Fabricated out of 2.0/1.6 mm thick CRCA sheet steel, painted with powder coated paint of shade as per the direction of Er in-charge after proper sheet treatment process ofsheet Steel. The Busbar of panel shall be of electrical grade high condutive Al. alloy of appropriate cross section as per rating. The main busbar shall non throught the panel of rating as main incomer rating. The busbar shall be supported by non hygrbscopic SMC/DMC bus bar supports which shall be mounted on proper interval to ensure the bear the jerks ofshort circuit of 50KA for panels having ACB as Incimmer & 36 KA for panels having MCCB incommers Panel shall be constructed in filly segregated compartment design for each feeder as per 3b constrution format. The panel shall be completed en all respect as per IS:8623 Part 2&3. There shall be Separate Metering compartment for incommermetering & outgoing mertering.All incommer feeders shall be provided with multifunctional metering along with phase indicating lights & other associated components such as CT, contror MCB terminal block etc. & all Outgoing feeders 100A & above shall be provided with 3 phase Ammeter along with phase indicating lights & other associated components such as CT, contror MCB terminal block etc. The feeders above shall be provided ac accommodated all measuring instruments shall be digital type & all indicating lights shall be LED type wiring shall be done from 1100v grade PVC insulated copper flexible wire. All ACB shall be Electrically operated draw-out type with microprocessor based O/L, S/C & E/F released of breahing/ withstand capacity(ICU/ICs/Icw) 50KA or more all MCCB shall be thermal magnetic microprocessor with O/L & S/C Protection along with required spreaders & extended rotary handle with pad loking facility of breaking capacity (ICU/ICS) 36 KA or more all MCB shall be10 KA C Curve Cubical type switch board shall be Cat-B onlyIncomming- 400Amp. MCCB-01 NosOutgoing- 200 Amp MCCB- 01 No, 100 Amp. 01 No & 63 Amp MCCB- 02 Nos. + 63 Amp 4 Pole MCBs-03 Nos& 400Amp4 Pole on load Change Over |
| 22 | Supply and burring of Safe Earthing Electrode T-39, ( Hot Dip Galvanized), Length up to 3000mm, outer door pipe 76mminner Dia 38 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive propertywith 50 kgs activatedsoil(BFC) capable of reducing the soil resistivity with good mixture of retainingcapacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (from apron to switch board, of 25mm x 3mm G.I. stripwill be extra) make as App. in UP PWD & CPRI Certified |
| 23 | S/L of 32mm x 6mm G.I. stripfrom earth electrode directly in the ground asrequired complete in all respects SI No.-716 |
| 24 | Dismentling of LED Street Light (L/R 1424) |
| 25 | Dismentling& Re-Fixing of High Mast Lighting System |
| 26 | S/F ofPortted Driver set for 110W to 200W LED Light (Sanctionedby mandiParishad)) |
| 27 | S/F ofSurge Protection Device(SPD) ForLED Light(Sanctionedby mandi Parishad) |
| 28 | Re-Fixingof LED Street Light(L/R 1424) |
| 29 | S/F of 25 Amp. TPN capacity of automatic street light cubical control panel painted with anticorrosive alkali & acid proof paint consisting of time switch TSO 100 Series with contactors, HRC Fuses, Isolating switch metering instrument & instruments box with CTs etc. in case of TPN, complete in all respects. |
