Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-04-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-04-2025 |
| 2 | 26-03-2025 | AMENDMENT TO TENDER DOCUMENTS AND REVISED BOQ | BOQ | 05-04-2025 |
| 3 | 25-03-2025 | Date corrigendum | Date | 05-04-2025 |
| 4 | 25-03-2025 | Amendments to tender | Other | 01-04-2025 |
| 5 | 21-03-2025 | AMENDMENT TO TENDER DOUCMENTS AND REVISED BOQ | BOQ | 01-04-2025 |
| Sl. No. | Item Description |
| 1 | Demolition of nominal cement concrete manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed. |
| 2 | Dismantling tiles,wall tiles only and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm complete all as specified and directed. |
| 3 | M&L for 25 mm thickCement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished, including cement slurry, but excluding the cost of nosing of steps etc complete all as specified and directed. |
| 4 | Providing and laying Double charge vitrified tile polished finish of size 10mm thick dark shade,area of each tile 600mmx600mm,in floor etc, (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed. |
| 5 | All as per item No 04 above but as in skirting including 12 mm thick screed bed in CM 1:3. |
| 6 | Providing and laying Double charge vitrified tile polished finish of size 10mm thick dark shade,area of each tile 0.42 sqm and not exceeding 0.72 sqm,in floor etc, (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed. |
| 7 | All as per item No 06 above but as in skirting including 12 mm thick screed bed in CM 1:3. |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete all as specified and directed. |
| 9 | Providing and fixing 1st quality Coloured glazed ceramic tiles of size 450mm x 300mm / 450mm x 350mm , in dado/skirting etc. conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed. |
| 10 | M&L for18-20mm thickGranite stone slab colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, steps, floor etcand similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. at all levels complete all as specified and directed. |
| 11 | M&L for providing edge moulding to 18 mm thick Granite work , Vanities etc., including machine polishing to edge to give high gloss finish etc complete all as specified and directed. |
| 12 | Demolition POP false ceiling, cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres leadcomplete all as specified and directed. |
| 13 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm,suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of siz76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange topierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws and With 15 mm thick Tegular edged light weight calciumsliciate false ceiling tiles. The workshall be carried out as per specifications, drawing and complete all as specified and directed. |
| 14 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and of stacking within 50 metres lead of area 3 sq. metres below each complete all as specified and directed. |
| 15 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres & above each complete all as specified and directed. |
| 16 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead of area 3 sq. metres and below complete all as specified and directed. |
| 17 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc.complete all as specified and directed. |
| 18 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.complete all as specified and directed (Glazing, paneling and dash fastenersto be paid for separately). |
| 19 | Providing and fixing 4mm thickfloat glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete all as specified and directed (Cost of aluminium snap beading shall be paid in basic item). |
| 20 | Providing and fixing Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm)glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete all as specified and directed (Cost of aluminium snap beading shall be paid in basic item). |
| 21 | Providing and fixing aluminium tower bolts, 150mmx10mm dia ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc complete all as specified and directed. |
| 22 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete size 100x63x3.2 mm complete all as specified and directed. |
| 23 | Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete all as specified and directed. |
| 24 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete size250x16 mm complete all as specified and directed. |
| 25 | M&L forPrelaminated particle board of 9mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in repairs complete all as specified and directed. |
| 26 | S&F venetian blinds, vertical type, 100 mm slot width of approved fabric and powder coated aluminium top railsetc complete all as specified, including dismantlilng old damaged one complete all as specified and directed.Note:The colour,design and shade shall be as approved by GE. |
| 27 | S&F for Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 28 | M&L 35 mm thick 2nd class hard wood factory made plain framed panelled, door shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 29 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete all as specified and directed. |
| 30 | Supplying and fixing FACTORY MADE SOLID PANEL PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed. |
| 31 | S&F Toughened glass 12 mm thickness as in partition ofwork station, shaped and moulded complete all as specified and directed |
| 32 | M&L for Pre-laminated particle board of thick ness 12 mm with decorative lamination on both sides, Grade I, Type II, IS:12823 marked , Grade I, Type II IS: 12823 marked fixing in aluminum/wooden partion with Rubber/screw as in repairs complete all as specified and directed. |
| 33 | S& F slip on hinges make ebco or its equivalent hydraulically closed type CP to fix in CB shutter complete all as specified and directed. |
| 34 | M&L PVC lipping on edges with adhesiv toprelaminated particle board with matching colour to the prelamboard to get aesthetic finish complete all as specified and directed. |
| 35 | M & L Solid PVC Wall Lining consisting of 5mm thick wood grain printedPrinted colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 36 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 37 | M & L in repairs 2 mm th Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting with adhesive complete all as specified and directed. |
| 38 | Dismantling structural steel work including doors, gates, stairways but excluding framed truss etc complete all as specified and directed. |
| 39 | Providing and fixing M.S. grills of required pattern in frames of windows Fixed to openings /wooden frames with rawl plugs screws etc . with M.S. flats, square or round bars etc. including priming coat with approved steel primer complete all as specified and directed. |
| 40 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead complete all as specified and directed. |
| 41 | M&L 15 mm thick plaster in CM 1:4 on fair faces of walls, finishing the surfaces even and smooth w/o using extra cement complete all as specified and directed. |
| 42 | M&L 10 mm thick internal plaster in CM 1:6 on other thanfair faces of walls , finishing the surfaces even and smooth w/o using extra cement complete all as specified and directed. |
| 43 | M&L 5 mm thick plaster in CM 1:3 , as in ceiling, finishing the surfaces even and smooth w/o using extra cement complete all as specified and directed. |
| 44 | M&L for preparation of plastered or unplastered surface & Distempering 02 coats with oil bound washable distemper of approved brand and manufacture to give an even shade over and including water thinnable priming coat with cement primercomplete all as specified and directed. |
| 45 | All as per item No 44 above, but on old surfaces including complete removal of existing treatment of any type and in any condition. |
| 46 | M&L one coat of synthetic enamel Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete all as specified and directed. |
| 47 | M&L two coat of synthetic enamel Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete all as specified and directed. |
| 48 | M&L for preparation of oldwooden surfaces Painting with synthetic enamel paint of approved brand and manufacture to give an even shade one coat on old work complete all as specified and directed. |
| 49 | M&L for preparation of old/new wooden surfaces Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work complete all as specified and directed. |
| 50 | M&L for praparing new plastering surface of ceiling and applying three coat of white wash complete all as specified and directed. |
| 51 | M&L for praparing old ceiling surface and applying two coat of white wash complete all as specified and directed. |
| 52 | M&L for Finishing walls with 100% Premium acrylic external emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed. |
| 53 | All as per item No 52 but one coat on old surfaces of walls. |
| 54 | M&L for 10mm thick cement screedin CM 1:3 over roof concrete surface and finishing the surface even and smooth with water proofing compound complete all as specified and directed (WPC shall be measured and paid seperately). |
| 55 | Supply only integral water proofing compound complete all as specified and directed. |
| 56 | (a) M&L for mechanical cleaning of surface to make it free from any bituminous residue/dirt oil and Grease etc all as specified and directed by GE/Engr-in-charge.(b) M&L for cracks treatment by cutting open cracks and cleaning it from dirt/loose materials etc and filling with polyurethane based sealant with and including application of PU based primer all as direct by GE/Engr-in-charge.(c) M&L for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% or specific primer matching same material as per manufacturer specification and as directed by GE/Engineer-in-Charge. A layer of geotextile grid of minimum 40gsm sandwich in between two PU layers as per manufacturer’s specification be provided. Properties of Poly urethane based chemical shall confirm to following techincal parameters:- (i) Highly elastic (ii)UV resistance (iii)Adhesion to concrete >1N/Sqmm (iv) Tensile Strength- not less than 2.0 N/Sqmm for free film (v) Elongation- Not less than 300% (vi) Solid content by weight - not less than 60% (vii) Air/Water permeability BSEN 12390 at 5 bar -72 hours should be Nil and minimum dry film thickness of water proofing membrane must be 1.0mm.(viii)Accelerated weathering (ASTM 453) : Pass 1000 hours.(ix) Reaction of fire - non inflammable. |
| 57 | Notes :-1. WPT shall be carried out/applied by the rep of manufacturer\"s test certificate for the above mentioned technical parameters alongwith purchase voucher.2. Removal of existing treatement to be paid separately.3. Roof slope to be ensured to avoid water ponding/seepages.4. For accessible terrace and in-accessible terrace 300mm height of vertical surface/parapet wall to be treated with same specification of WPT of slab. |
| 58 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete all as specified and directed. |
| 59 | Taking down collapsible steel gates/shutters consisting of channel, pickers, pivoted flat bars, top and bottom runners for servicing and checking its function including fixing only new wheels, top and bottom channels, cleaning and greasing of wheels and channels etc., complete and fixing in its original position complete area exc 4.00 Sqm and n.exc 10 Sqm each complete all as specified and directed. |
| 60 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) complete all as specified and directed. |
| 61 | S&F in repairs steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required complete all as specified and directed. |
| 62 | All as per item No. 60 above but of size of 20mm bore |
| 63 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000L of three layers, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including removal of old one complete all as specified and directed. |
| 64 | Supply and fix in repair 15 mm CP cast copper alloy bib taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 65 | S & F in repairs C.P. Brass stop cock (concealed) 15 mmscrewed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed. |
| 66 | Providing & fixing White Orissa pattern W.C Pan of size 580x440 mm(Indian type)along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba,complete all as specified and directed. |
| 67 | Providing and fixing in repair white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (W.C. pan with ISI marked white solid plastic seat and lid ) complete all as specified and directed. |
| 68 | S & F in repair Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) complete all as specified and directed. |
| 69 | Providing and fixing in repairs white solid plastic seat with lid for pedestal type complete all as specified and directed. |
| 70 | Providing and fixing ball valve (brass) of approved quality of 20 mm nominal bor High or low pressure, with plastic floats complete all as specified and directed. |
| 71 | Providing & fixing in repair White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS:2556 complete all as specified and directed. |
| 72 | Providing and fixing Granite Stone of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter andembedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) complete all as specified and directed. |
| 73 | Providing and fixing in repairwash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm and a 15 mm C.P. brass pillar tap including PVC waste pipe complete all as specified and directed. |
| 74 | S & F in repair 450mm long PVC connection with PTMTcheck nuts for 15mm bore pipes of approved quality complete all as specified and directed. |
| 75 | Providing and fixing CP towel rail 20mm dia of length 60 cm complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete all as specified and directed. |
| 76 | S & F in repair 600mm x 450 mm size and 4mm thick beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed. |
| 77 | Providing and fixing toilet paper holder C.P. brass including dismantiling complete all as specified and directed. |
| 78 | S & F in repair angle cock fancy type chromium plated 15mm bore complete all as specified and directed. |
| 79 | S&F in repairs CP health Faucets (1m tube & Hook) Prayag cat part No. BEA-81 or techno commercial make of Hindware/Somany/Jaquor complete all as specified and directed. |
| 80 | Demolition of PCC or old brick work of any description and in any position complete all as specified and directed. |
| 81 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 82 | Demolition and breaking up rain waterPVC or AC pipes of dia 150mm fixed in any condition upto 4 mtr height complete all as specified and directed. |
| 83 | S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 84 | S&F for 110mm bore PVC (SWR) shoe bend complete all as specified and directed. |
| 85 | S&F for 110mm bore PVC (SWR) bends any radious provided with access door complete all as specified and directed. |
| 86 | Material and labour for Stainless Steel railing/posts of required size, fixed to sides of platform/ path/ stairways etc including suitable size steel bolt/ fastners/ fitting etc complete all as specified and directed. |
| 87 | Material and labour for 75mm thick cement concrete (1:3:6) type C2using 40 mm graded crushed stone aggregate as in Plinth protection with smooth finish by using extra cement complete all as specified and directed. |
| 88 | Providing and fixing to the inlet mouth of Nahi trap/drain PTMT (an Engineering Thermoplastic) gratinground 100 mm dia with a height of 8 mm and weighing not less than 75-100 gms complete all as specified and directed. |
| 89 | Dismantlingroofing including ridges, hips, GI Sheets, valleys and gutters etc., and stacking the material within 50 metres lead of complete all as specified and directed. |
| 90 | Providing & Fixing 0.63mm thick corrugated G.S. sheet roofing including vertical/horizontal/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (Height up to 12 to 15 Mtr, factory type bldg/Hangar) complete all as specified and directed. |
| 91 | S&F in bevelled edge Mirror of size 1500x600 mm with 6mm hard board, wooden frameand wooden beading around the glass all as specified and directed. |
| 92 | M & L For Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 93 | M& L for Mortice lock, vertical type, size 100 Brass metal and4 Leverscomplete all as specified and directed. |
| 94 | Taking down carefully U/Saluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,light fittings etc , removing allmaterial for reuse/ issued under sch of credit and making good the distrubed surface as the existing one, complete all as directed. |
| 95 | M&L Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through and including non metallic rigid PVC heavy dutyconcealed conduit (minimum 25 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I,ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed surface/ concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLScable as earth continuity wire including modular type metal flush box with cover plate and frame of required modulemounting of modular switches, sockets, switch sockets, fan regulators with required modules complete all as specified and directed for the follwing :- |
| 96 | One light point controlled by one wayswitch complete |
| 97 | One fan/exhaustpoint controlled by one wayswitch complete |
| 98 | One 3 pin socket point 5 Amps on same board complete |
| 99 | One 3 pin socket point 5 Amps on independent board complete |
| 100 | All as per item No 94 here-in-before but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLScable with copper conductor size 1.5 sqmmPVC insulatedunsheathed continuous earth continuityfor 3 pin 15 amps soket outletindependently. |
| 101 | Supply & fix switch modular type single pole 1 way 5 Amp 230 volt complete all as specified and directed. |
| 102 | Supply & fixsocket combination6 Amps modular type, 230 volts grade complete all as specified and directed. |
| 103 | Supply & fixSocket combination6A/16A modular type 230 volts grade with frame and cover complete all as specfied and directed. |
| 104 | Supply & fix switch modular type single pole 1 way 16 Amp 230 volt complete all as specified and directed. |
| 105 | Supply & fix ceiling rose surface backelite two to three terminal complete all as specified and directed. |
| 106 | Supply and fixing of sheet metal enclosure of thickness 1.2mm powder coated, Distribution board, Double Door type,VTPN MCCB 200Ampsas Incomer, 6way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Door earthing complete all as specified and directed. |
| 107 | Supply and fixing of sheet metal enclosure of thickness 1.2mm powder coated, Distribution board, Double Door type,VTPN MCCB 200Ampsas Incomer, 8way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Door earthing complete all as specified and directed. |
| 108 | Supply and fixing of sheet metal enclosure of thickness 1.2mm powder coated, Distribution board, Double Door type,VTPN MCCB 200Ampsas Incomer, 12way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Door earthing complete all as specified and directed. |
| 109 | Supply & fixing of MCCBs 415V, 4 pole 100 Amps 16 KAfor fixing in VTPN DB complete all as specified and directed. |
| 110 | Supply and fixing of4 way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 Volts on recess complete with tinned copper bus bar 100 Amps capacity, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required (but without MCB/RCCB/isolaltor) complete all as specified and directed. |
| 111 | Supply and fixing of6 way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 Volts on recess complete with tinned copper bus bar 100 Amps capacity, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required (but without MCB/RCCB/isolaltor) complete all as specified and directed. |
| 112 | Supply and fixing of8 way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 Volts on recess complete with tinned copper bus bar 100 Amps capacity, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required (but without MCB/RCCB/isolaltor) complete all as specified and directed. |
| 113 | Supply and fixing of12 way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 Volts on recess complete with tinned copper bus bar 100 Amps capacity, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required (but without MCB/RCCB/isolaltor) complete all as specified and directed. |
| 114 | Supply and fixing of4 way single pole and neutral, sheet steel, MCB distribution board, 240 Volts on recess complete with tinned copper bus bar 100 Amps capacity, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required (but without MCB/RCCB/ isolaltor) complete all as specified and directed. |
| 115 | Supply and fixing of8 way single pole and neutral, sheet steel, MCB distribution board, 240 Volts on recess complete with tinned copper bus bar 100 Amps capacity, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required (but without MCB/RCCB/ isolaltor) complete all as specified and directed. |
| 116 | Supply and fixing of12 way single pole and neutral, sheet steel, MCB distribution board, 240 Volts on recess complete with tinned copper bus bar 100 Amps capacity, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc as required (but without MCB/RCCB/ isolaltor) complete all as specified and directed. |
| 117 | Supply & fix\"C\" Curve MCBTPN 32 Amps 415volts 10 KA rupturing capacity complete all as specified and directed. |
| 118 | Supply & fix MCB SPN 6 to 40 Amps 240 volts 10 KA rupturing capacity complete all as specified and directed. |
| 119 | Supply & fix\"C\" Curve MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as specified and directed. |
| 120 | Supply and fixing of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug socket complete withone single 20 Amps volts complete all as specified and directed. |
| 121 | M&L for sub main wiring complete with 4 runs of 16 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends includingtwo runs of 10 Sqmm of PVC insulated unsheathedcopper conductor cable green colour as continuous earth continuity conductor complete all as specified and directed. |
| 122 | M&L for sub main wiring complete with 4 runs of 10 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends includingtwo runs of 6 Sqmm of PVC insulated unsheathedcopper conductor cable green colour as continuous earth continuity conductor complete all as specified and directed. |
| 123 | M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends includingone runs of 6 Sqmm of PVC insulated unsheathedcopper conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as specified and directed. |
| 124 | M&L for sub main wiring complete with 2 runs of 4 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends includingtwo runs of 6 Sqmm of PVC insulated unsheathedcopper conductor cable green colour as continuous earth continuity conductor complete all as specified and directed. |
| 125 | Taking down ceiling fan/ Exhaust fan ,dismantling the fan for carrying out servicing, greasing including replacing rubber reel, clamps, cottor pin and other minor parts etc, cleaning and filling cavities with filler and painting of ceiling fans with one coat of synthetic enamel paint by spraying and refixing the same and making electric connection with proper cable complete all as specified and directed. |
| 126 | Taking down old existing Wall mounted fan Air circulater Servicing of wall fans and refixing and connecting with necessary cable fromor connector to fan and making good to damaged surface of wall/ceiling to match existing finish complete all as specified and directed |
| 127 | Power console made out of aluminium insulation material poly carbonate sheet of colour as approved in standard length comprising of 5 Nos 5/15 Amps5 pin electric socket controlled by one switch (modular type) with one control MCB 20 Amps SP and indication lamp fitted, internal wiring including fixing of console on pedestal made out of MS frames, etc of suitable size complete all as specified anddirected. |
| 128 | M & L for Earthing with copper earth plate 600 x 600 x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc with charcoal/coke and salt as required testing and submission of test reports within permissible limit complete all as specified and directed. |
| 129 | M & L for copper earth continuity main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit of size 20 x 3 mm complete all as specified and directed. |
| 130 | Supply and fixingof SPN enclouserwith 2 pin and earth plug socket complete with one SP 20 Amps MCBcomplete all as specified and directed |
| 131 | Supply and fixing DLP U-PVC Cable trunking systems and acessories snap on trunking 80 x 50 mm supplied without cover,80mmx50mm PVC Trunking complete all as specified and directed |
| 132 | Supply and fixing ofFlexible cover only, full cover size width 65 mmsuitable for80mmx50mm PVC Trunking complete all as specified and directed |
| 133 | Supply & fixing of 32 Amps TPN Industrial Socket with 32 Amps MCB complete all as specified and directed |
| 134 | Supply & fixing of 63 Amps TPN Industrial Socket with 32 Amps MCB complete all as specified and directed |
| 135 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 136 | Supply and fixing LED lights fitting 1x 40 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 137 | Supply and fixing of LED luminaire 600 x 600 x 36mm, 230 volts recessed type with high efficiency PMMA diffuser soft glare light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core copper flexible conductor of suitable size complete all as specified and directed. |
| 138 | Supply and fixing of Change over switch 100 amps TPN capacity with sheet steel enclosure complete all as specified and directed |
| 139 | Supply and fixing of Circular LED high bay with tapered fin design 70 Watts, Indoortype with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as spcified and directed . |
| 140 | Supply and fixingCircular LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as spcified and directed . |
| 141 | Supply and fixing of round shape 12 watt 230 volts recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core copper flexible conductor of suitable size complete all as specified and directed. |
| 142 | Supply and fix MCB TP 40 Amps 240 volts 10 KA rupturing capacity complete all as specified and directed. |
| 143 | Taking down of existing sub main wiring any size capacity with conduit and accessories complete all as specified and directed. |
| 144 | Supply and installhi wall split units indoor/outdoor complete with cordless remote control unit, inverter AC copper condenser minimum 3 star ratingof EER 3.20 of capacity of 2 TR, connecting in and including copper refrigerant, with insulation material wire, copper tube complete all as specified and directed. |
| 145 | Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140 volts to 280 volts with out put voltage stablized at 200-240 volts with accuracy of +/- 3% with high low cut off and intelligent time delay, capacity 5 KVA complete all as specified and directed. |
| 146 | M&L for MS stand duly painted suitable for fixing 2 TR AC outdoor unit and fixed complete all as specified and directed. |
| 147 | Supplying and laying of 20 mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed to walls, ceilings or in floors etccomplete all as specifiedand directed. |
| 148 | M&L making opening/drilling of size 65 mm dia, using heavy duty stone driller/cutter machine in the stone machinry wall for installing spilit type air conditioners and for passing suction and discharge refrigerant pipe lines, drain pipe, cable etc and making good the disturbed surface complete all as specified and directed. |
| 149 | M&L for Sub main wiring2 x 4 sqmm + 1 x 4 sqmm earth wire, PVC Insulated, Unsheathed, multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including suitable PVC non matallic rigid conduit medium grade with accessories fixed on walls/roofs/floors/ceiling etc and connecting terminl ends complete all as specified and as directed. |
| 150 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. complete all as specified and directed. |
| 151 | Supply and fixing fire alarm control panel complying with BSEN 54 single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete all as specified and directed. |
| 152 | Supply and fix addressable detector with heat and smoke combination complete all as specified and directed. |
| 153 | Supply and fix Fire Alarm sounders / Sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for 1000 metre range complete all as specified and directed. |
| 154 | S&F, Addressable manual call point resettable type complete all as specified and directed. |
| 155 | Supply and laying of 2x1.5 Sqmm fire armoured cable 600/1000 V , rated with annealedcopper conductorhaving XLPE insulation, steel wire armouring& FRLS outer sheath complete all as specified and directed |
| 156 | S&F beam detector with transmitter and receiver complete all as specified and directed. |
| 157 | Taking down carefully old unserviceable fire alarm system battery, detector any type call point wiring etc complete all as specified and directed. |
| 158 | Supply instal power supply unit and module comprising of 12 volt (2x7 AH) complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
