|
| 1 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in hard/ dense soil for laying of GI/DI Pipe all as specified and directed. |
| 2 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 Cms thickness all as specified and directed. |
| 3 | Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 4 | Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 15mm dia complete all as specified and directed. |
| 5 | Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 20mm dia complete all as specified and directed. |
| 6 | Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 25mm dia complete all as specified and directed. |
| 7 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 100mm dia all as specified and directed. |
| 8 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 150mm dia all as specified and directed. |
| 9 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 200mm dia all as specified and directed. |
| 10 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 250mm dia all as specified and directed. |
| 11 | Ductile iron pipe 100mm bore dia, spigot and socket ends, class \"K-9\" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed. |
| 12 | Ductile iron pipe 150mm bore dia, spigot and socket ends, class \"K-9\" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed. |
| 13 | Ductile iron pipe 200mm bore dia, spigot and socket ends, class \"K-9\" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed. |
| 14 | Ductile iron pipe 250mm bore dia, spigot and socket ends, class \"K-9\" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed. |
| 15 | Ductile iron specials such as bends, tapers, tee pieces (singleand double branch) any type and angle / radius and straight connecting piece but all ends socketed / flanged of size 80, 100 to 150mm dia bore all as specified and directed. |
| 16 | Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 100mm dia bore including fixing and testing complete all as specified and directed. |
| 17 | Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 150mm dia bore including fixing and testing complete all as specified and directed. |
| 18 | Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 200mm dia bore including fixing and testing complete all as specified and directed. |
| 19 | Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 250mm dia bore including fixing and testing complete all as specified and directed. |
| 20 | DI mechanical joint 100 mm confirmiring to relevant to latest IS code all as specified and directed |
| 21 | DI mechanical joint 150 mm confirmiring to relevant to latest IS code all as specified and directed |
| 22 | DI mechanical joint 200 mm confirmiring to relevant to latest IS code all as specified and directed |
| 23 | Automatic Air release Valve Reducer 100mm to 80mm confirmiring to relevant latest IS code all as specified and directed. |
| 24 | Automatic Air release ValveReducer 200mm to100mm confirmiring to relevant latest IS code all as specified and directed. |
| 25 | Supply and fix threaded/ Welded MS flange joint for 80mm GI pipe with all necessary fittings all as specified and directed |
| 26 | Supply and fix threaded/ Welded MS flange joint for 50mm GI pipe with all necessary fittings all as specified and directed |
| 27 | Supply and fix threaded/ Welded MS flange joint for 40mm GI pipe with all necessary fittings all as specified and directed |
| 28 | Material and labour for servicing to MGF and ACF filteration plant, Old media removing from vessels, Rubbing and cleaning of vessels, Washing media, Loading of new filter media and epositing the old filter media 50 m away from the tank, the materials included as mentioned below:Supply of PSF support & filter media:MGF - Size - 2000 mm (D) * 1500 mm (H), Vessel Quantity - 01 No, Coarse silex - 400 kg\"sFine silex - 400 kg\"s, Caarse sand - 2500 Kgs, , Fine send - 1,500 kg\"s, Media per vessel - 6200 kg\"sSupply of ACF filter media:ACF - Size - 2000 mm (D) * 1500 mm (H), Vessel Quantity - 01 Nos, Activated carbon - 1,400 kg\"sSupply of 600 mm Rubber gasket for drain cover and manhole coverMOC - EPDM Rubber, Thick - 5 mm, Quantity - 04 Nos for 2 vesselsSupply of bolt, nuts for Top opening Manhole cover, and Bottom opening Drain coverSize - 15 mm (D) x 62 mm (L), (1 Bolt+ 1 Nut + 2 washer), Qty-12 Nos for 2 vesselsSupply of bolt, nuts for frontal pipe line valve flanges:Size - 15 mm (D) x 100 mm (L),(1 Bolt+ 1 Nut+2 washer), Qty-08 Nos for 2 vesselsSupply and service charge for painting inside - Epoxy 1 layers of ccating, Outside - Aluminum paint 1 layer of coating, Caverage area - 800 sqft for 2 vesselsService charge for media replacing and plant commissioning workACF size – 2500 * 1500 mm – 01 jobPSF size – 2500 * 1500 mm – 01 jobOld media removing from vessel (for each job)– 2 no’sRubbing and cleaning of vessels (for each job)– 2 no’sWashing media’s (for each job)– 2 no’sLoading media’s(for each job) – 2 no’sMaterial transport charges |
| 29 | Taking up/down carefully serviceable / unserviceable GI Pipe and connections from the trenches or removal from walls, floors etc of size 15mm dia all as specified and directed. |
| 30 | Taking up/down carefully serviceable / unserviceable GI Pipe and connections from the trenches or removal from walls, floors etc of size 20mm dia all as specified and directed. |
| 31 | Taking up/down carefully serviceable / unserviceable GI Pipe and connections from the trenches or removal from walls, floors etc of size 25mm dia all as specified and directed. |
| 32 | Taking up/down carefully serviceable / unserviceable GI Pipe and connections from the trenches or removal from walls, floors etc of size 40mm dia all as specified and directed. |
| 33 | Taking up/down carefully serviceable / unserviceable GI Pipe and connections from the trenches or removal from walls, floors etc of size 50mm dia all as specified and directed. |
| 34 | Taking up/down carefully serviceable / unserviceable GI Pipe and connections from the trenches or removal from walls, floors etc of size 80mm dia all as specified and directed. |
| 35 | Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 15mm dia all as specified and directed. |
| 36 | Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 20mm dia all as specified and directed. |
| 37 | Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 25mm dia all as specified and directed. |
| 38 | Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 40mm dia all as specified and directed. |
| 39 | Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 50mm dia all as specified and directed. |
| 40 | Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 80mm dia all as specified and directed. |
| 41 | Cutting existing steel tubing 15mm dia for alterations and screwing existing steel tubing with required accessories (Tee, Nipple etc) all as specified and directed. |
| 42 | Cutting existing steel tubing 20mm dia for alterations and screwing existing steel tubing with required accessories (Tee, Nipple etc) all as specified and directed. |
| 43 | Cutting existing steel tubing 25mm dia for alterations and screwing existing steel tubing with required accessories (Tee, Nipple etc) all as specified and directed. |
| 44 | Cutting existing steel tubing 40mm dia for alterations and screwing existing steel tubing with required accessories (Tee, Nipple etc) all as specified and directed. |
| 45 | Cutting existing steel tubing 50mm dia for alterations and screwing existing steel tubing with required accessories (Tee, Nipple etc) all as specified and directed. |
| 46 | Taking out existing unserviceable gunmetal gate valve of size 50/40/25/20mm dia after dismantling existing union, nipple and cutting the rusted out thread and making new thread for inserting new gate valve all as specified and directed. |
| 47 | Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 50mm dia all as specified and directed. |
| 48 | Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 40mm dia all as specified and directed. |
| 49 | Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 25mm dia all as specified and directed. |
| 50 | Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia all as specified and directed. |
| 51 | Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 15mm dia all as specified and directed. |
| 52 | Supply and fixwater level monitoring instrument based on magnetic level sensing, sensor should sealed inside stainless steel and actuated by float and LED display Gives Level Indication (5 stages of 20% each) Automatic Control of Pump and Warning Alarms if level goes outside the automation range, including of necessary electrical wiring from float to LED display all as specified and directed. |
| 53 | Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 80mm dia all as specified and directed. |
| 54 | Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 100mm dia all as specified and directed. |
| 55 | Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 200mm dia all as specified and directed. |
| 56 | Cutting PCC paving / road etc not exceeding 15cm thick for laying of Pipe all as specified and directed. |
| 57 | PCC 1:2:4 type B-1 using 20mm graded stone aggregate 150mm thick for making good road, finished fair and even all as specified and directed. |
| 58 | Construction of brick masonry valve chamber230 mm thick wall of 600 mm x 600 mm x 860 mm height internal size, for valves upto 50mm sizenecessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to mS angle iron frame made out of 40mm x 40 mm 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete all as specifed and directed. |
| 59 | Construction of brick masonry valve chamber 230 mm thick wall of 900 mm x 900 mm x 860mm height internal size, for valves of size 80/100 mm , necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to mS angle iron frame made out of 40mm x 40 mm 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete all as specifed and direted. |
| 60 | Construction of brick masonry valve chamber 230 mm thick wall of 1200 mm x 1200 mm x 860mm height internal size, for valves of size more than 100mm , necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B -1 using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete all as specifed and directed. |
| 61 | Foot valves of size 80 mm of cast iron flange ends swing type with rubber seats of single disc type complete all as specified and directed. |
| 62 | Foot valves of size 100 mm of cast iron flange ends swing type with rubber seats of single disc type complete all as specified and directed. |
| 63 | Disconnecting the electric motor of capacity 10HP from position, strip opening the motor, taking out burnt copper winding wire from slots, cleaning the slots, rewinding the motor with suitable gauge of copper winding wire, insulating and vernishing, baking, including supply and replacing the bearings and refixing the motor with proper alignment with pump set, connecting up the electric connections testing, commissioning and transporting complete all as specified and directed. |
| 64 | All as per item No 63 hereinbefore but 15HP motor all as specified and directed. |
| 65 | All as per item No 63 hereinbefore but 25HP motor all as specified and directed. |
| 66 | All as per item No 63 hereinbefore but 40HP motor all as specified and directed. |
| 67 | All as per item No 63 hereinbefore but 30HP motor all as specified and directed. |
| 68 | All as per item No 63 hereinbefore but 2HP motor all as specified and directed. |
| 69 | All as per item No 63 hereinbefore but 1HP motor all as specified and directed. |
| 70 | All as per item No 63 hereinbefore but 7.5HP centrifugal pump all as specified and directed. |
| 71 | All as per item No 63 hereinbefore but 10HP centrifugal pump all as specified and directed. |
| 72 | Dismantling the defective centrifugal pump set, multi stage of capacity 40HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed.Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items.(ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paint etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item.(iii) The spares shall be of original make of pump as suitable as approved |
| 73 | Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 40HP all as specified and directed. |
| 74 | Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed. |
| 75 | Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed. |
| 76 | Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 40HP all as specified and directed. |
| 77 | Supply only Key suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed. |
| 78 | Supply only Coupling set suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed. |
| 79 | Supply only rubber bush with bolts, nuts, washers and spring washers suitable for centrifugal pump set, multi stage of capacity 40HP all as specified and directed. |
| 80 | Dismantling the defective centrifugal pump set, multi stage of capacity 25HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed.Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items.(ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item.(iii) The spares shall be of original make of pump as suitable as approved |
| 81 | Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 25HP all as specified and directed. |
| 82 | Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed. |
| 83 | Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed. |
| 84 | Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 25HP all as specified and directed. |
| 85 | Dismantling the defective centrifugal pump set, multi stage of capacity 15HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation commisioning and testing on full load complete all as specified and directed.Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items.(ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item.(iii) The spares shall be of original make of pump as suitable as approved |
| 86 | Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 15HP all as specified and directed. |
| 87 | Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed. |
| 88 | Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed. |
| 89 | Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 15HP all as specified and directed |
| 90 | Dismantling the defective centrifugal pump set, multi stage of capacity 10HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation commisioning and testing on full load complete all as specified and directed.Note: (i) The rate quoted for this item shall include labour charge only for maint repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items.(ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item.(iii) The spares shall be of original make of pump as suitable as approved |
| 91 | Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 10HP all as specified and directed. |
| 92 | Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 10HP all as specified and directed. |
| 93 | Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 10HP all as specified and directed |
| 94 | Fully Automatic Star Delta Starter 7.5 to 15 HP type ML 1.5 current rating 10 to 25 Amps in Sheet-Steel Enclosurewith Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed.Make L&T Cat No. SS94362 or equivalent in ABB/ Siemens. |
| 95 | Fully Automatic Star Delta Starter 25 HP type ML-2 current rating 25 to 40 Amps in Sheet-Steel Enclosurewith Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed.Make L&T Cat No. SS94364 or equivalent in ABB/ Siemens. |
| 96 | Fully Automatic Star Delta Starter 40 HP type ML-3 current rating 35 to 65 Amps in Sheet-Steel Enclosurewith Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed.Make L&T Cat No. SS94366 or equivalent in ABB/ Siemens. |
| 97 | Fully Automatic Star Delta Starter 12.5 HP type ML 1.5 relay range 9 to 14 Amps in Sheet-Steel Enclosurewith Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed. |
| 98 | Three core flat PVC insulated Copper Cable, nominal area of conductor 6 Sqmm, 1100 volts, conforming to IS:694 all as specified and directed. |
| 99 | Three core flat PVC insulated Copper Cable, nominal area of conductor 10 Sqmm, 1100 volts, conforming to IS:694 all as specified and directed. |
| 100 | Supply only Sodium hypochlorite granule. Make: Aquafit |
| 101 | Supply only Alum (poly aluminum chloride) for water treatment. Vikram Pac |
| 102 | Single phase preventer all as specified and directed. |
