|
| 1 | GAS STATION |
| 2 | Excavation in all types of soil including morrum, hard soil, gravelly soil or slushy soil for foundation of wall, columns, plinth beams, basement, rail ducts, trenches, under ground sumps, septic tanks etc.including shoring, strutting, bailing out water/pumping out water if required, refilling the trenches / foundation pits in layers of 150mm to 200mm, ramming, watering consolidating removing and stack-ing simultaneously the surplus excavated stuff as directed within the site area upto a lead of 100m and or spreading the same in layers for site development and consoli-dating as directed, including cost of labour tools and plants, taxes etc. complete as per direction of Engineer-In-Charge.a) From exiting ground level upto 1.5 M depth. |
| 3 | Providing, supplying and filling approved local sand by mechanical / manual means for land development etc., in low land area, foundation, trenches, & plinth foundation areas, and foundation surrounding areas in layers of 150mm to 200mm including watering, ramming and consolidating, transportation, freight, loading, unloading, labour, T&P, taxes, octori, levies, royalties, spreading and compacting etc. complete as per direction of Engineer-in-charge. |
| 4 | Providing, supplying & laying in position machine mixed plain cement concrete in volumetric proportion (1:3:6) of any thickness forvolumetric proportion 1: 3: 6(1cement: 3 coarse sand: 6 HG stone crusher broken stone aggregates of size 37mm and down) in required thickness, for foundations, below walls, hard park, column footings, sunk floor, terraces, rafts, roads at any height above plinth level, at any depth below floors, plinth protection, etc. including centering and shuttering, if required, laying, spreading, ramming, consolidating, as per requirement and curing etc. including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer- in-charge. |
| 5 | Providing, supplying & fixing plywood shuttering for any shape and size as specified in Architect\"s Drawing including rigid & smooth shuttering centering, bracing & propping, housing, keeping the same in position, providing access, and removal of the same after specified period, cost of all material, carpentry works, nails, including laying of polytheen over the shuttering and including cost of transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge.a) For structural elements, viz. footing foundation, columns, beams, slabs, precast slab, raft, staircase, plinth beam, gutter, bed block, lintels, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, overhead and under ground water tanks, culverts etc. at different levels in any shape as per structural design and as directed |
| 6 | Providing, supplying & laying in position machine mixed and machine vibrated cement concrete of controlled grades of specified volumetric proportions, for reinforcement cement concrete structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, overhead and under ground water tanks, culverts etc. at different levels in any shape as per structural design and as directed in specified compressive strength expressed in N/sqmm at 28 days as per I.S: 456-1978 using 20mm and down size of hard crusher broken black granite aggregates, necessary lift and lead finishing concrete surfaces, and forvolumetric proportion 1:1 1/2: 3(1 cement : 1 1/2 : coarse sand: 3 HG stone aggregates of size 20mm ) and down concrete in ground and plinth etc. excluding cost of centering and shuttering / centering& reinforcement and including cost of all material but excluding cost of reinforcement and including cost of curing,transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge.Do- as per items no 2.06 but for M20 or volumetric proportion 1: 1 1/2: 3 (1cement: 1 1/2 coarse sand: 3 HG crusher broken stone aggregates of size 20mm and down) concrete at all level upto highest plinth level. |
| 7 | Providing, supplying and constructing brick masonry in CM 1:6 (1 cement: 6 coarse sand) in foundation and upto plinth level with 1st class quality approved FLY ASH bricks having minimum crushing strength 70kg/sqcm including soaking the bricks in water vat for 24hoursbefore use in foundation at all levels below and upto highest plinth level, all necessary scaffolding, racking out the joints, including cost of all materials, transportation, curing, loading, unloading, labour, T&P taxes, duties, levies, octroi royalties etc. complete as per direction of Engineer in-charge. |
| 8 | Providing, fabricating and fixing in position steel reinforcement for RCC structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, mullions, overhead and under ground water tanks, road pavement, kerbs, culverts, etc. at different levels in any shape as per structural design and drawing and as directed and specified, as per design at all levels including lift and loading, unloading& transporting steel within site premises from departmental storeto the work site, unloading and incidental charges for handling, cutting, bending and binding at all height and floor with 16 gauge GI wire (to be supplied by the contractor at his own cost), welding if necessary etc., labour, T&P complete as per direction of Engineer-in-charge. Pre-measurement will be made on the length basis and converted into weight by using standard IS co-efficient with Tor steel bars, Do as per mention specificationbut for M20 or volumetric proportion 1: 1 1/2: 3 (1cement: 1 1/2 coarse sand: 3 HG crusher broken stone aggregates of size 20mm and down) concrete at all level upto highest plinth level. |
| 9 | Providing, supplying & fixing plywood shuttering for any shape and size as specified in Architect\"s Drawing including rigid & smooth shuttering centering, bracing & propping, housing, keeping the same in position, providing access, and removal of the same after specified period, cost of all material, carpentry works, nails, including laying of polytheen over the shuttering and including cost of transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge.a) For structural elements, viz. footing foundation, columns, beams, slabs, precast slab, raft, staircase, plinth beam, gutter, bed block, lintels, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, overhead and under ground water tanks, culverts etc. at different levels in any shape as per structural design and as directed |
| 10 | -Do- as per RCCof above plinth but for volumetric proportion 1: 1 1/2: 3 (1cement: 1 1/2 coarse sand: 3 HG crusher broken stone aggregates of size 20mm and down) concrete at all level above highest plinth level.upto 1st floor |
| 11 | -Do- as per items no 7.0 butbrick work in superstructure at all height above highest plinth level upto all height upto 6.0M( Ground floor) |
| 12 | Providing, fabricating and fixing in position steel reinforcement for RCC structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, mullions, overhead and under ground water tanks, road pavement, kerbs, culverts, etc. at different levels in any shape as per structural design and drawing and as directed and specified, as per design at all levels including lift and loading, unloading& transporting steel within site premises from departmental storeto the work site, unloading and incidental charges for handling, cutting, bending and binding at all height and floor with 16 gauge GI wire (to be supplied by the contractor at his own cost), welding if necessary etc., labour, T&P complete as per direction of Engineer-in-charge. Pre-measurement will be made on the length basis and converted into weight by using standard IS co-efficient with Tor steel bars |
| 13 | Providing, supplying and applying 12 mm thick cement plaster in line and level, at all heights above and below plinth level with cement motar 1:4(1 cement: 4 sand) to walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves, etc. including scaffolding, curing, finishing smooth (the plaster surface shall be troweled till the surface shows cement paste), and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties etc. complete as per direction of Engineer – In-Charge |
| 14 | Providing, supplying & applying two or more coats ofcoats of emulsion paints (Waterbased )to of approved make and shade of “Royale Luxury Asian” including cost of Finishing existing wall surface with two more coats of Acrylic wall putty (Waterbased ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges on smooth plaster finished surfaces of walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves etc. at all heights above plinth level and preparation of surface for painting, scaffolding, curing etc., including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties levies, octroi, royalties etc. complete as per direction of Engineer - In-Charge |
| 15 | Providing, supplying, fabricating hoisting and fixing in position M.S. structure fabricated with M.S. channels, angle, flat, joist structure/Truss protection channels of reception dock, Runner & Purloin for laying Asbestos sheet provision etc. as per architectural drawing and design including cutting, electrical arc welding, grinding to smooth surface at all level forGI sheet roofing, drilling holes, welding tie with required GI ‘L’ hooks, nuts, washers & tar washers etc. and grouting with P.C.C. (1:1 ½:3 or M-20) as per design including 2 coats of first quality synthetic enamel paint of make Asian or equivalent all complete. including cost of all materials, transportation, loading, unloading, labour, tools & paints, taxes, duties, levies, lift, octroi, royalties etc. complete as per direction of Engineer-in-Charge. |
| 16 | Providing, supplying and fixing in position in line and level Galvanised Metasheets of 18 gauge in Roofing of reputed brandat all level on, or above the of the M.S. structure with required rust proof GI hooks, screw, nuts, washers & tar washers etc. level including cost of all materials, transportation, loading, unloading, lift, labour T&P taxes, duties, levies, octori, royalties etc. completed as per direction of Engineer-in-charge. |
| 17 | Supplying, fitting, fixing of M.S grills of approved design and specification by using M.S. flat, angle, square bar confirming to I.S. No. 1977/95 in wooden choukath / brick wall with necessary nos of screws as may be required including cutting holes for clamps & fixing the grills with C.C. (1:2:4) by using 12mm size H.G. chips wherever necessary in all floors and all heightsincluding watering, curing ,scafolding with cost, conveyance, taxes of all materials, cost of all labour, labour cess, T&P etc required for the work complete in all respect as directed by Engineer-In-Charge. |
| 18 | STATE LAB INTERIOR WORK |
| 19 | Providing, supplying and filling approved local sand by mechanical / manual means for land development etc., in low land area, foundation, trenches, & plinth foundation areas, and foundation surrounding areas in layers of 150mm to 200mm including watering, ramming and consolidating, transportation, freight, loading, unloading, labour, T&P, taxes, octori, levies, royalties, spreading and compacting etc. complete as per direction of Engineer-in-charge. |
| 20 | Providing, supplying and constructing brick masonry in CM 1:6 (1 cement: 6 coarse sand) in foundation and upto plinth level with 1st class quality approved Fly Ash bricks having minimum crushing strength 70kg/sqcm including soaking the bricks in water vat for 24hoursbefore use in foundation at all levels below and upto highest plinth level, all necessary scaffolding, racking out the joints, including cost of all materials, transportation, curing, loading, unloading, labour, T&P taxes, duties, levies, octroi royalties etc. complete as per direction of Engineer in-charge. |
| 21 | Providing, supplying , laying and fixing of vetrified tile at all levels 10mm thick 600x600 of approved make such as \"Johnson & Johnson or Somani brand \"in Floor/dado / skirting to any height in all floors fixed with neat cement slurry after soaking the tiles in water, under layer of 12mm thick CM (1:3) mix, (The rate shall be inclusive of center point firing i.e. extra labour materials etc. to be considered so as to get outlet of plumbing / sanitary fitting at the junction of floor tile), with white cement pointing in joints including washing and cleaning polish with oxalic acid, including cost of all materials, transportation, curing,loading, unloading, labour, T&P, taxes, duties, levies, octroi, royalties, etc. complete as per direction of Engineer-in-charge |
| 22 | Providing, supplying and applying 12mm thick cement plaster in line and level, at all heights above and below plinth level with cement motar 1:4(1 cement: 4 sand) to walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves, etc. including scaffolding, curing, finishing smooth (the plaster surface shall be troweled till the surface shows cement paste), and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties etc. complete as per direction of Engineer – In-Charge |
| 23 | Providing, supplying & applying twocoats ofemulsion paints to of approved make and shade of “Royale Luxury Asian” including cost of Finishing existing wall surface with two more coats of Acrylic wall putty (Waterbased ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges on smooth plaster finished surfaces of walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves etc. at all heights above plinth level and preparation of surface for painting, scaffolding, curing etc., including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties levies, octroi, royalties etc. complete as per direction of Engineer - In-Charge |
| 24 | Supplying, fitting, fixing up one track FIX TYPE window made up Galvanize aluminum Section 4703 (white powder coating) as window frame, secton No. 2496,4902as shutter ,section No.4702 as bottom rail ,section no.2495 as vertical inter lock with 5mm thick double tinted glass as panel fitted with silicon rubber (complete Air tight) bending including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 25 | Providing fitting, fixing of (PUFF SANDWICH) Al.Door made up Galvanize aluminum Section of 9202 as vertical member,9201 as top member, 9200 as bottom & middle member and 12mm thick Puff Pannel fixed on door(top & bottom pannel) with frame section as 9221by means of tappered clip no 4660 and the frame to be completed by means of jointihg angle no1855 includingfittted with silicon rubber all cost of labour, T&P.hire charges of drilling machines, labour charges etc. complete. |
| 26 | Providing and fixing in position Gypsum Ceiling . including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties, levies, octroi, royalties etc.Precoated angles of size 25x25 mm are screw fixed to the perimeter of the wall or partition at the given ceiling level. Main ‘T’ sections 3600mm long, with \"H\" slots at 150 or 300mm centers in its vertical flange, to hold the cross \"T\" sections, are suspended from the soffit with the help of rawlplug, soffit cleat and G.I. wire(4mm dia) at 1200mm c/c. These sections also have notch at its both ends to increase the length. Cross \"T\" sections of 1200mm length with \"H\" slot in the center and notches at both ends are inserted fixed into the main \"T\" at 600mm c/c to form a regular grid of 600x1200mm. Cross \"T\" of 600mm length is inserted fixed into the 1200mm cross \"T\" to form a regular grid of 600x600mm. complete as per direction of Engineer in-charge. (Measurements to be considered for payment shall be the clear size of opening plus guide channels on both sides for width and 450mm on top for drum height) |
| 27 | Prividing fitting and fixing up partition walling by using Galvanize alluminium Frame (fabricated as per architect’s design) jointed, miteredwith aluminum lugs embedded in cement concrete blocks 150x100x100mm of mix 1:2: 4(1 cement: 2 coarse sand: 4 hard granite stone, 19mm and down grade) including glazing with approved quality plain 6mm thick toughened glass or galvanize Alluminum panel fixed bothside with all accessorieslike gaskets , handled hinges , locking arrangements fittings, white silicon rubbers etc. complete. Including cost of all materials, transportation, load-ing, unloading, labour T&P, taxes, duties, levies, octroi, royalties, etc. complete as per direction of Engineer -in-charge. |
| 28 | Supplying, fitting, fixing up Cupboard under or over slab or window (sliding or openable type) made up galvanize aluminum Section 9778 as window fram, secton No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick toughened glass or alluminum panel as panel fitted with white silicon rubber bending including locking arrangemet including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 29 | Providing, supplying & laying in position machine mixed and machine vibrated cement concrete of controlled grades of specified volumetric proportions, for reinforcement cement concrete structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, overhead and under ground water tanks, culverts etc. at different levels in any shape as per structural design and as directed in specified compressive strength expressed in N/sqmm at 28 days as per I.S: 456-1978 using 20mm and down size of hard crusher broken black granite aggregates, necessary lift and lead finishing concrete surfaces, and forvolumetric proportion 1:1 1/2: 3(1 cement : 1 1/2 : coarse sand: 3 HG stone aggregates of size 20mm ) and down concrete in ground and plinth etc. excluding cost of centering and shuttering / centering& reinforcement and including cost of all material but excluding cost of reinforcement and including cost of curing,transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge. -Do- as per items no 2.06 but for M20 or volumetric proportion 1: 1 1/2: 3 (1cement: 1 1/2 coarse sand: 3 HG crusher broken stone aggregates of size 20mm and down) concrete at all level above plinth level. |
| 30 | Dismantling the RCC beams, slabs, lintels, columns, pardis, walls, platform etc. of any thickness & at all height providing & fixing necessary prop with chisels, hammer etc. including finishing the broken surface to match with the surrounding, supports, removing and stacking the debris as directed within site upto a lead of 100m, including cutting the reinforcement if any, etc. including labour, T&P scaffolding taxes and duties etc. complete as per direction of Engineer-in-charge. |
| 31 | Dismantling the brick work etc. of any thickness & at all height providing & fixing necessary prop with chisels, hammer etc. including finishing the broken surface to match with the surrounding, supports, removing and stacking the debris as directed within site upto a lead of 100m, including cutting the reinforcement if any, etc. including labour, T&P scaffolding taxes and duties etc. complete as per direction of Engineer-in-charge. |
| 32 | Dismantling the plaster and existing Granite slab removing and stacking the debris as directed within site upto a lead of 100m, including cutting the reinforcement if any, etc. including labour, T&P scaffolding taxes and duties etc. complete as per direction of Engineer-in-charge. |
| 33 | Dismantling and removing the old existing window, door & partition, including removal of frame, glass, hings, fastening in all floors at all heights and stacking the useful materials for reuse and removing the debris away from the work site with all leads including cost of all labour, sundries and T&P etc. required for the work compete as directed by the Engineer- in - Charge. |
| 34 | Supply fitting fixing and furnished of Granite Tiles of 16mm thickness of all materials carriage including all cost of all materials, labour T & P required for the work etc complete. |
| 35 | Supplying, fitting and fixing of M.S. grill in windowsincluding screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 36 | Providing, supplying, fabricating & laying in position the 304 Stain Steel laborotory Platform over the existing concrete slab of different size and height as per site requirement including all accessories, materials, labour T & P required for the work etc complete. |
| 37 | Providing, supplying, laying, fitting & fixing concealed underground / overhead / open structure, water line of C.P Schedule 80 \"B\" class water supply pipeline of reputed brand with ISI mark of following nominal bores, at all level, including all necessary excavation and necessary specials & fittings like union bends short pieces, making zaries, making holes, cutting floor, tread, cutting, jointing with jute fiber & paints/putty stainless steel. fixing clamps etc. or jointed by electrical welding and painting with two coat of anti-corrosive bituminous paints, sand cushioning and covering with sand after checkingstainlesss steel specials and fittings refilling of trenches etc. including cost ofall labour, material, transportation, levies, royalties, lead and lift T&P. all taxes and duties etc. complete as per direction of Engineer-in-charge.-Do- as per items no 11.02 but For 25mm dia NB pipe |
| 38 | Do- as per items no 11.02 but For 20mm dia NB pipe |
| 39 | Providing, supplying and fixing C.P heavy-duty bibcock of ESSCO/ Ark / Gem brand ISI marked with chromium-plated disc. Etc. for 12mm nominal bore pipelines, including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties, levies, octori, royalties etc. completed as per direction of Engineer-in-charge. |
| 40 | Providing, supplying and fixing C.Pheavy-duty stopcock of ESSCO/ Ark / Gem brand ISI marked with chromium-plated disc. Etc. for 12mm nominal bore pipelines, including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties, levies, octori, royalties etc. completed as per direction of Engineer-in-charge. |
| 41 | Providing and fixing adjustable type of C.P. shower rose of approved Brand with ISI mark with chromium plated Disc shower arm etc. with 15 to 20mm inlet including cost of all materials, transportation, loading unloading, labour, T&P, taxes, duties, levies, octroi, royalties etc. completed as per direction of Engineer-in-charge. |
| 42 | Supplying all materials, labour and T&P for fixing of standard size C.P towl ring fixed to stainless steel plugs withand washers etc. all complete as per specification (3.3.29/359) (including cost of towl ring) |
| 43 | Fixing 5\" dia stainless steel Jalli of following nominal diameter for wash basin or sink including brass check nut complete as per specification. |
