Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-03-2025 | Tender Postponed | Date | 26-03-2025 |
| 2 | 16-03-2025 | Revised BOQ | BOQ | 26-03-2025 |
| Sl. No. | Item Description |
| 1 | M&L for Surface excavation n. exc 30 Cm deep and averaging 15 cm deep and getting out in Soft/loose soilcomplete all as specified and directed. |
| 2 | Earth work in Excavation over areas not exceeding 1.5m depth for foundation in any type of soil and getting out complete all as specified and directed. |
| 3 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation, pipe line or for manholes not exc 10 Sqm on plan and not exc 1.5m in depth in any type of soil and getting out all as specified and as directed. |
| 4 | Returning, filling in (soil)including spreading, levelling, watering and well ramming in layers not exc 25cm thick all as specified and all as directed. |
| 5 | Removal of excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and as directed. |
| 6 | M&L for plain cement concrete, 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 7 | M&L for moorum filling in floorsor paving, laid in layers not exec 15cm thick, including spreading, levelling, rammingand watering in layers complete all as specified and as directed. |
| 8 | Filling under floors including spreading, levelling, rammingand watering in layers not exc.25 cm thick complete all as specified and as directed. |
| 9 | M&L for hard core of broken stone/boulders of gauge not exc 63mm deposited spreed and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 10 | M&L for RCC, M-25 (design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and as directed. |
| 11 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and as directed. |
| 12 | M&L for RCC,M-25 (design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts etc. complete all as specified and as directed. |
| 13 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns etc. for rough finished surfaces of concrete complete all as specified and as directed. |
| 14 | M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in beams,cantilevers,bressummers, lintels over 1.5m span etc. complete all as specified and as directed. |
| 15 | M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in shelves and the like complete all as specified and as directed. |
| 16 | Use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including supports, etc for rough finished surfaces of concrete complete all as specified and as directed. |
| 17 | M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs complete all as specified and as directed. |
| 18 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc for rough finished surfaces of concrete complete all as specified and as directed. |
| 19 | M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed. |
| 20 | M&L for mild steel TMT bars, 5mm dia and over upto and including 10mm dia asin stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed. |
| 21 | M/L forDamp proof course to horizontal or vertical surface including necessary formwork of 40 mm thick in PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate mixed with integral water proofing compound conforming to IS-2645 complete all as specified and as directed. |
| 22 | M&L for providing cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate inlintels upto 1.5 m clear span, cills, seismic and other similar bands, plinth courses,string courses lacing courses, parapets and railings, coping, kneelers, apex stones, bed plates, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed . |
| 23 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregates)as in hold fasts, bed blocks, bed plates, concrete filling around pipes including necessary formwork all as specified and as directed. |
| 24 | Demolition of stone/ brick masonry built in cement or cement lime mortar as in portions orderedcomplete all as specified and as directed. |
| 25 | M&L for brick work with old size fly ash ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6complete all as specified. |
| 26 | M&L for GI wire netting 0.90mm dia and12mm mesh . in walls, ceilings, beams etcincluding alllaps, cutting and waste including making V grooves in crack portion and filled with cement mortar 1:2 complete all as specified and as directed. |
| 27 | M&L for precast PCC solid block masonry with PCC 1:5:8 blocks (using 20mm graded stone aggregate) exc 10 cm in width, built in cement mortar 1:6 complete all as specified and as directed. |
| 28 | Taking down cement or cement lime plaster on brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 29 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfacesin cement mortar 1:4, duly mixed with WPC as per manufacturers instructions,finished even and fair complete all as specified and as directed. |
| 30 | M&L for rendering 10 mm thick on fair face of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 31 | M&L for rendering 5 mm thick on fair faces of concrete surfaces as insoffits of slabin cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and as directed. |
| 32 | M&L for preparation of new plastered surfaces of ceiling and applying three coat ofwhite wash complete all as specified and as directed |
| 33 | M&L for preparation of new plastered surfaces of walls and applying two coats of Acrylic emulsion distemper over a coat of acrylic primer complete all as specified and as directed. |
| 34 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 35 | M&L for preparation of oldplastered surfaces of wallsand applying two coats ofwhite wash complete all as specified and as directed |
| 36 | M&L for preparation of oldplastered surfaces of ceilingand applying two coats ofwhite wash complete all as specified and as directed |
| 37 | M&L for applying 1.5mm thick wall care putty and sanding to achieve smooth surface complete all as specified and as directed. |
| 38 | M&L for preparation of old surfaces of walls, pillasters, cornices etc and applying one coat of Acrylic emulsion distemper of any colour complete all as specified and as directed. |
| 39 | M&L for complete removal of existing treatment and preparation of old surfaces of walls, pillasters, cornices etc and applying two coat of Acrylic emulsion distemper of any colour complete all as specified and as directed. |
| 40 | M&L forpreparation of new plastered surfaces andapplying twocoats of 100% premium exterior acrylic emulsion paint having VOC less than 50 gm/liter and UV resistant as per IS 15489: 2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives@ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm all as specified and as directed.Note : Shade shall be as approved bt GE |
| 41 | M&L for complete removal of existing treatment from wall surfacesand applyingtwo or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistant as per IS 15489: 2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives@ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm all as specified and as directed. |
| 42 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 43 | Demolition of reinforced cement concrete (reinforcement cutas required to facilitate demolition) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed. |
| 44 | Dismantling of kota stone/granite/cudappah slab of any description, laid, bedded & pointed in any mortar all as specified and as directed. |
| 45 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and rubbish offthe premises etccomplete all as specified and as directed. |
| 46 | M&L for 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as a levelling course for flooringcomplete all as specified & directed. |
| 47 | M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (Square or Rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6complete all as specified and as directed. |
| 48 | M&L for double charged vitrified coloured tiles, 8 to 9mm thick (Square or Rectangular), area of each tiles not exc 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6complete all as specified and as directed. |
| 49 | M&L for double charged vitrified coloured tiles, 8 to 9mm thick (Square or Rectangular), area of each tiles not exc 0.36 Sqm as in dado/skirting or on vertical surfaces,etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 10 mm thick screed bed in cement mortar 1:4complete all as specified and as directed. |
| 50 | M&L for glazed coloured ceramic tiles (shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 300mm x 7 mm thick, as indado, skirting, risers to step etc laid over andincluding 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed. |
| 51 | M&L for 18 to 22mm thick machine cut kota stone slab flooring (size of kota stoneslab 550mm x 550 mm),laid over and including 20mm thick screed bed in cement mortar 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed. |
| 52 | M&L for 15 to 18mm thick machine cut kota stone on vertical surfaces such as skirting/ dado, riser of steps, laid over andincluding 10mm thick backing coatin cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified and as directed. |
| 53 | M&Lfor 18 to 20 mm thickpre polished Granite stone slab of approved colour (of any type)(table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including full round moulding to the outer edges with high gloss finish set in cement mortarand pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 15mm thick screed bedin cement mortar 1:4 complete all as specified and as directed.Note:- Colour/shade shall be as approved by GE / Engineer-in-Charge. |
| 54 | M&L for 15-18mm thick white marble (of any type) workas in border strips of 100-150 mm width in kota stone flooring set in 20mm thick screed bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified & as directed. Note:- Colour/shade shall be as approved by GE / Engineer-in-Charge. |
| 55 | M&L for 75mm thick PCC 1:4:8 type D-2 as in sub base of flooring etc complete all as specified as directed |
| 56 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 57 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surfaces of walls in cement mortar (1:3) complete all as specified and asdirected. |
| 58 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar 1:3 complete all as specified and as directed. |
| 59 | Taking down shutters of any description, area exc 1 sqm & n.exc 2 sqm each leafcomplete all as specified & as directed. |
| 60 | Resecuring or easing & adjusting without taking down shutters of any description, area exceeding2 sqmeach all as specified and as directed. |
| 61 | S&F factory made steel ventilator with top hung shutter including hinges, steel peg stays etc complete all as specified & as directed. |
| 62 | S&F mild steel windows/ ventilatorsfixed type with glazing bars complete all as specifed and as directed |
| 63 | S&F pressed steel doors frames of size 105mm x 60mm x 1.25mm thick, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one coat of primer complete all as specified and as directed. |
| 64 | M&L for rolled mild steel work (angle iron or any other section) as in door frame (Chowkhats) & cooler stand confirming to Fe-290 (Gde E165) including preparing back of chowkhatapplying two coats of tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and as directed. |
| 65 | M&L for plain cement concrete, type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in bed block, hold fast, coping and similar work etc including necessary form work complete all as specified and as directed. |
| 66 | S&F35 mm thick second hard wood, factory made, plain framedpanelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part- I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 67 | S&F 35mm thick IInd class hard wood glazed skelton shutters, factory made, open rebated and prepared to recive glass, guage etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part- I section - 8, clause 8.20 (a) and fixed to chowkhat complete all as specified and as directed. |
| 68 | S&F 30 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhatscomplete all as specified and directed. |
| 69 | S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steelpeg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 70 | S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steelpeg stay complete without glazing bars, complete all as specified and as directed. |
| 71 | S&F powder coated anodized aluminium frames for door, window, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.Note:- Colour shall be as approved by GE/Engineer-in-Charge. |
| 72 | S&F powder coated anodised aluminium window and ventilator shutters, fixedtype without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified.Note:- Colour shall be decided by GE/Engineer-in-Charge. |
| 73 | S&F5 mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 74 | S&F5 mm thick figured glass, pin headed type and glazing with oil putty in squareexc 0.5 Sqm in each pane complete all as specified and as directed. |
| 75 | S & F powder coated aluminum windows, three track, made out of aluminium sectionsincluding all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a)Window frame:(i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m)(ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m)(b)Shutter: (i)Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note :Shade shall be as approved by Engineer-in-Charge. |
| 76 | S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 77 | M&L for preparing the new wooden surfaces over 10cm width or girth & applying two coats of synthetic enamel paintover one coat of pink primercomplete all as specified & as directed. |
| 78 | M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 79 | M&L for preparation of old wood and wood based surfaces of any description exec 10cm width and girth otherwise described & applying one coat of synthetic enamel paint complete all as specified & as directed. |
| 80 | M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 81 | M&L for framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framed guard bars, iron doors,.ladders, framed balusters, walk ways. railings, frame work ofwater tanks and similar work conforming to Fe 290 Gde E-165all as specified and as directed. |
| 82 | S&Fstainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden/steel frames withtinned tacks or galvanized wire staple & complete all as specified and directed. |
| 83 | S&F in repair stainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames withtinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 84 | Hacking outold broken glass (any thickness ,size quality or description) fromwooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 85 | S&F3 mm thick frosted/ figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 Sqm in each pane fixed to windows with glazing pins complete all as specified and as directed. |
| 86 | S&F3 mm thick frosted/ figured glass, pin headed type and glazing with oil putty in squareexc 0.5 Sqm in each pane fixed to windows with glazing pins complete all as specified and as directed. |
| 87 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square n.exc 0.50 sqm in each pane, fixedwith glazing pinscomplete all as specified and as directed. |
| 88 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed, overall length of cover plate140mm, all as specified and as directed. |
| 89 | S&F butt hinges medium weightcold rolled mild steel100 mm size complete all as specified and directed. |
| 90 | S&F 150mm size aluminium alloy handles, fabricated type, ISI markedcomplete all as specified and as directed. |
| 91 | S&F for aluminiumanodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed. |
| 92 | S&F for aluminiumanodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed. |
| 93 | S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all asspecified and as directed. |
| 94 | Dismantling asbestos cement sheet (corrugated or semi corrugated etc) including ridges in large patches as in roof covering complete all as specified and as directed.Note:- Dismantling existing wind tie and refixing the same where required for taking down ofsheets shall deemed to be included in the unit rate quoted . |
| 95 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 96 | S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates and similar work confirming to Fe 410W(Gde E-250 quality A) complete all as specified and as directed |
| 97 | M&L for rolled mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections conforming to Fe 410-W(Gde-E250) quality A) including distance pieces, cleats etc. all as specified and as directed. |
| 98 | S&F prepainted galvalume aluminum zinc coating GI based corrugated/ Trapezoidal steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified & as directed.Note:- Colour & Pattern shall be as approved by GE/Engineer-in-Charge. |
| 99 | M&L for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ridges/valley gutters/cladding to wall, fixed with self tapping screws as specified ad as directed. Note:- Colour shall be as approved by GE/Engineer-in-Charge. |
| 100 | Cutting holes into or through brick wall built in cement mortar and walls of cement concretesuperficial area exc 150 sqcm but n exc 400 sqcm and making good in cement concrete 1:2:4 type B-1 as required complete all as specified & directed by Engr-in-Charge. |
| 101 | M&L for plain cement concrete, 1:2:4 type B1 (using 20mm graded stone aggregates) as in kerbs / filletting to sides of interlocking paver blocks, finished even and smooth without using extra cement including formwork if required complete all as specified and as directed. |
| 102 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grains Printed PVC sheet reinforced with mild steel square tube, suppling and fixing in opening as per specifications & drawings all as specified and as directed. |
| 103 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain mouldedPVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC sheet on back face and fixedas per specification & drawing complete all as specified and as directed. |
| 104 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specifications & drawing complete all as specified and as directed by Engineer-in-Charge |
| 105 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter (both side) of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.Note: Stainless steel butt hinges shall be paid separately under respective item. |
| 106 | S&F butt hinges,Stainless steel, 100mm long fixed withwelding to existing MS pressed steel chowkhat/shutter or fixed to wooden/WPC frame with necessary SS screws complete all as specified and as directed. |
| 107 | Dismantling of existing unserviceable water tank ofany description capacity exc 500 Ltr but n.exc 1000trs capacity each complete all as specified and directed |
| 108 | Dismantling of existing unserviceable water tank ofany description capacity exc 2000 Ltr but n.exc 5000trs capacity each complete all as specified and directed |
| 109 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 5000ltr capacity, triple layered,of any color as approved by Engineer-in-charge, hoisted and fixed in position all as specified in SSR Part I complete all specified and as directed |
| 110 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000ltr capacity, triple layered,of any color as approved by Engineer-in-charge, hoisted and fixed in position all as specified in SSR Part I complete all specified and as directed |
| 111 | S&F in repair20mm dia ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, compete (Minimum weight 210 gm) complete all as specified & as directed. |
| 112 | S&F 20 mm bore ball valves, high pressure, PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, Minimum weight for 20mm - 210gm complete all as specified and as directed. |
| 113 | S&F 25 mm bore ball valves, high pressure, PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, Minimum weight for 20mm - 210gm complete all as specified and as directed. |
| 114 | S&F in repairs20 mm dia gun metal globe or gate valve (ISI marked) with iron wheel head screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing complete all as specifed and as directed |
| 115 | S&F20 mm bore gun metal or bronze globe / gate valve, ISI marked,screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed. |
| 116 | S&F for 25 mm bore gun metal or bronze globe / gate valve, ISI marked,screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed. |
| 117 | S&F SS Grating with square frame (Grating thk- 1mm & frame thk- 1.5mm) of size 125mm (minimum) with waste hole complete all as specified and directed. Note: Design of grating to be approved by Engineer-in-Charge. |
| 118 | Taking up or down 15 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 119 | Supply and laying 16mm bore CPVC pipes, SDR 11 and plain CPVC SDR 11 fittings fixed to walls/ceiling or laid in floors with and including all fittings and jointing material / solvent complete all as specified and as directed. |
| 120 | M&L for UPVC pipes, 15 mm bore (Pressure rating 10 kgf/cm²) laid in trenches / floors or fixed to wall in any length with all UPVC fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing complete all as specified and as directed. |
| 121 | M&L for cutting chases for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; for concealed water tubingand making good, cutting not exc 10 cm girthall as specified and as directed. |
| 122 | Taking up or down 20 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 123 | S&F 20mm bore medium grade galvanised iron tubing with all fittngs and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed. |
| 124 | Taking up or down 25 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 125 | S&F 25mm bore medium grade galvanised iron tubing with all fittngs and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed. |
| 126 | M&Lfor 75 mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 127 | M&Lfor 75 mm dia outlet PVC (SWR) multi-hole floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 128 | S&Fbrass Chromium plated shower rose, 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified & as directed. |
| 129 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 130 | S&F in repairs vitreous China wash hand basin, oval shaped, white/ivory, size 560x400mm minimum, including pillar tap 15mm bore chromium plated fancy type, waste coupling 32mm brass chromium plated, pvc waste pipe, 15 mm dia PVC connection pipe complete all as specified and as directed. |
| 131 | S&F vitreous China wash hand basin,flat back, white/ivory, size 550 x 400mm minimum,including brackets, including pillar tap 15mm bore chromium plated fancy type, waste coupling 32mm brass chromium plated, pvc waste pipe, 15 mm dia PVC connection pipe complete all as specified and as directed. |
| 132 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed. |
| 133 | S&F vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed. |
| 134 | S&F PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacityWhite, with inlet ball valve, float, handlewith 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and as directed. |
| 135 | S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacityWhite, with inlet ball valve, float, handlewith 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and as directed. |
| 136 | M&L viterous China urinals, half stall (back to corner wall type), of size 440 x 360 x 270 mm minimum complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including brass chromium plated urinal spreader, flush pipe, grating and Union for discharge pipe and PVC waste pipe 32mm dia complete all as specified and as directed. |
| 137 | S&F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and as directed. |
| 138 | S&F in repairs, 32/ 40 mm bore PVC flexible outlet pipes for wash basin/ sink/ urinal fixed complete all as specified and as directed. |
| 139 | S&F stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. |
| 140 | S&F 15mm bore dia stop valve, angle valve of cast copper alloy, fancy type CP long body (concealed type) high pressure screwed for iron pipe complete all as specified and as directed. |
| 141 | S&F in repair bib tap 15mm dia, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 142 | S&F bib tap 15mm dia, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 143 | S&F in repair 15mm bore, fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with orwithout lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and asdirected. |
| 144 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed. |
| 145 | S&F soap dishbrass chromium plated, approximate size 160 mm x 100 mm x 90 mm, fixed to plugs with chromium plated brass screws & gutties, complete all as specified and as directed. |
| 146 | S&F bevelled edge looking mirror 5.5mm thick ofsize 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screwscomplete all as specified andas directed. |
| 147 | S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all asspecified and as directed. |
| 148 | S&F in repairs, stainless steel sink with drain board made of 1mm thick sheet for kitchen including plugs, washers, waste pipe, cast iron cantilever brackets, connecting union to pipe, over all size 915 mmx 460 mm with bowl size 410 mm x 350 mmx 250 mm all as specified and as directed. |
| 149 | S&F stainless steel sink with drain board made of 1mm thick sheet for kitchen including plugs, washers, waste pipe, cast iron cantilever brackets, connecting union to pipe, over all size 915 mmx 460 mm with bowl size 410 mm x 350 mmx 250 mm all as specified and as directed. |
| 150 | M&L for mild steel round bars, 10mm dia and over as in rungs/handle for manhole cover/septic tank cover conforming to Fe-410-W (GradeE-250) complete all as specified and as directed. |
| 151 | S & F Stainless steeltrough type dish wash sink of overall size 2000mm x 600mm x 300mm made out of SS-304 grade 14 SWG stainless steel sheet including provision of 03 appropriate tapsall as directed by Engineer-in-charge.Note :- The design of sink shall be got approved from from theEngineer-in-charge before procurement. |
| 152 | M & L for wall claddingwith SS-304 grade 1mm thick Stainless steel sheet duly rivetted to frameworkwith and including framework made out of 25mm x 25mm x 3.25mm thick mild steel square pipe with vertical/ horizontal spacing of pipe not more than 1.5m. The lapping of sheet at ends shall not be less than 40mm duly rivetted or welded seams including bending or turning up complete all as specified and as directed. |
| 153 | M&L for post construction anti termite treatment along the external perimeter of wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron .complete all as specified and as directed. |
| 154 | M&L for cutting into existing manhole for connecting new drains making good to pipes & rendering, cutting out existing benching & forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B1, smooth finished for 150mm bore pipe complete all as specified and directed. |
| 155 | M&L for welding in repairs, n exc 2.50cmlength, thickness of metal to be welded n exc 6mm complete all as specifiedand as directed |
| 156 | M&L for providing precast cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in cover slabs for manholes/septik tanks/drains & set incement mortar 1:4 including necessary form work complete all as specified and as directed. |
| 157 | M&L for 150 mm internal dia reinforced cement concrete pipes, class NP2, laid and jointed in cement mortar with collarscomplete all as specified & as directed. |
| 158 | M&L for concrete bed to drain pipes in PCC 1:4:8 type D2 using 40mm graded stone aggregate including packing under and haunching against the sides of the pipesafter they are laid and tested for 150mm internal dia pipes complete all as specified and as directed. |
| 159 | M&L for brick bats filling in soakage wellcomplete all as specified and as directed. |
| 160 | S&F 75 mm bore PVC (SWR) pipes single socketed, minimum pressure rating 4kg/sqcm, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & as directed. |
| 161 | S&F 110 mm bore PVC (SWR) pipes single socketed, minimum pressure rating 4kg/sqcm, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & as directed. |
| 162 | S&F 110 mm bore PVC (SWR) pipes, minimum pressure rating 4kg/sqcm, single socketed in any length with rubber ring joints fixed to walls, including clamps for securing pipe complete all as specified & as directed. |
| 163 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & as directed. |
| 164 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & as directed. |
| 165 | S&F 110 mm bore PVC (SWR) bends complete all as specified |
| 166 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 167 | S&F for 25m dia SScurtain rod with brackets and end knobs at both ends as per site requirement complete all as specified & as directed.Note:The cost of brackets and knobs is deemed to be included in the quoted rate. |
| 168 | M&L for machine cut cudappah stone slab 20-25mm thick as in cooking platform, wash basin slabs, etc including cutting chases in brick wall and fixing the slab in cement mortar including rubbing and polishing complete all as specified and as directed. |
| 169 | M&Lfor water proofing treatment to RCC roof slab, including parapet, comprising with the followingtreatment/specification from bottom to top:-(i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 100 mtr distance from starting point.(ii) Screed bed or bedding layer of 10 mm thickcement mortar 1:4 with mixing of WPC @ 3% by weight of cement or as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum),weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall beapplied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. |
| 170 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:-(i) Surface roughening concrete slab by picking, sweeping clean and washing down with water to remove dust etc and applying cement slurry @3kg/Sqm.(ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 as in roof slab with mixing of WPC (3% of cement content) and surface finished even and smooth using extra cement.(iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum),weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be laid/ applied over bituminous primer as specified above, application of polymeric membrance shall be by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.Note:Rate quoted by the contractor includes all the steps mentioned above to be execute complete all as specified and as directed. |
| 171 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, bell push, holders, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc andmaking good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed. |
| 172 | M&L for point wiringcomplete, concealedtype with two runs of 1.5 sqmm for phase and neutral single core multistranded copper conductor cable of 1100 Volts gradePVC insulated andunsheathed, FRLS cabledrawn through and including PVC rigid conduit not less than 20 mm dia with its accessories (ISI marked)with modular cover plate with frame and modular metal flush boxes, blank plate for mounting fitting & fixtures like switches, sockets and fan regulators etc with and including 1.5 Sqmmcopper conductor cable (multistranded)PVC insulated and unsheathed FRLS cableas earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other endall as specified and as directed for one light Point/fan point controlled by one way Switch complete all as specified and as directed.NOTES: (a) Proper colour coding shall be adopted for wiring (for Phase- RED, YELLOW, BLUE for Earth - Green and Neutral - Black. (b) All points shall be earthed up to fixtures i.e holdrs, tube lights all lights, ceiling lights, bldg security lights etc. (Note: The unitrate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making gooddisturbed surfaces. |
| 173 | All as per serial item No 172 above but for one 3 pin socket outlet 5 Amps on same board with other switches complete all as specified and as directed. |
| 174 | All as per serial item No 172 above but for one 3 pin socket outlet 5 Amps on Independent board complete all as specified and as directed. |
| 175 | All as per serial item No 172 above but for power point 5/6 pin Socket outlet 15 Amp with PVC insulated andunsheathed, FRLS cable 2.5 Sqmm on independent board complete all as specified and as directed. |
| 176 | All as per serial item No 172 above but for one 5 pin socket outlet 5 Amps on same board with other switches complete all as specified and as directed. |
| 177 | All as per serial item No 172 above but for one 5 pin socket outlet 5 Amps on Independent board complete all as specified and as directed. |
| 178 | S&Fmodular switch single pole, one way6/10 Amps 1 module complete all as specified and as directed |
| 179 | S&F modular switch single pole, one way 16 Amps, 1 module complete all as specified and as directed |
| 180 | S&Fmodular socket 6 Amp-2/3 pin combined 2module complete all as specified and as directed. |
| 181 | S&Fmodularsocket, 6 A/16 Amp -2/3 pin combined 2 module complete all as specified and as directed. |
| 182 | S&F ceiling rose surface bakelite three terminal type complete all as specified and as directed. |
| 183 | S&Fmodularfan regulatorstep type, 120W-2 Module complete all as specified and as directed. |
| 184 | S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified and as directed. |
| 185 | S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC. all as specified & asdirected. |
| 186 | S&F sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 4 way,protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copperbusbar, with Neutral bar, Earth bar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 187 | S&F modular cover plate frame, 2 module complete all as specifed and as directed. |
| 188 | S&F modular cover plate frame, 3 module complete all as specifed and as directed. |
| 189 | S&F modular cover plate frame, 4 module complete all as specifed and as directed. |
| 190 | S&F modular cover plate frame, 6 module complete all as specifed and as directed. |
| 191 | S&F modular cover plate frame, 8 module complete all as specifed and as directed. |
| 192 | S&F in repairsInverter LED batten 20W 6500K with square profile and polycarbonate channel, lithium-Ion battery with charging time 8hours-10 hours, back up time up to 4 hours and surge protection up to 4KV.Make: HAVELLS PRIDE PLUS INVERTER BATTEN Cat No LHEXACP7FN1W020or equivalent of other makes specified. |
| 193 | S&F in repairs, 210 mm x 210 mm size, flat panel square fixture, slim,compact, aluminium die cast lit panel, recess mounting1 x 18 watt, 230 voltwith opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including tconnections from ceiling rose to light fittings complete all as specified & as directed.Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP71Z1W018 or equivalent model of makes specified in PS. |
| 194 | S&F decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientof capacity 20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : HAVELLS Cat No LHEXACP7IN1W020 or equivalent model of makes specified. |
| 195 | M&L for sub main wiring with 4 runs of 10 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and includingheavy duty PVC rigid conduit 25mm dia and over (ISI marked) totally concealed with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 10 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTES: (a) Rate includes cutting chases and making good to walls. (b) Proper colour coding shalladopted for wiring (for Phase- RED, YELLOW, BLUE for Earth -Green and Neutral-Black)(c) 5 runs of 10 sq.mm cable and one run of PVC conduit shall be measured as one unit. |
| 196 | M&L for sub main wiring with 4 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and includingheavy duty PVC rigid conduit 20mm dia and over (ISI marked) totally concealed with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTES:(a) Rate includes cutting chases and making good to walls. (b) Proper colour coding shalladopted for wiring (for Phase- RED, YELLOW, BLUE for Earth -Green and Neutral-Black)(c) 5 runs of 4 sq.mm cable and one run of PVC conduit shall be measured as one unit. |
| 197 | Supply and fix in replacement Isolator TPN, AC 415 volts, 100 Amps \"C\" series, 10kA capacity,including making conncection with suitable size of copper lugs complete all as specified & as directed. |
| 198 | S&Flamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitttings complete all as specified and as directed. |
| 199 | S&F in replacement triple pole and earth enclosure with a three pin and earth plug and socket complete with one triple pole MCB of capacity 32 Amps 415 Volts complete all as specified and as directed. |
| 200 | Supply and fixMCB SP \"C\" series, 6 to 32 Amps, 10kA capacity,240volts, including making conncection with suitable size of copper lugs complete all as specified & as directed. |
| 201 | Supply and fix in replacement MCB SP \"C\" series, 6 to 32 Amps, 10kA capacity,240volts, including making conncection with suitable size of copper lugs complete all as specified & as directed. |
| 202 | Supply and fixMCB SPN \"C\" series, 32 Amps, 10kA capacity,240volts, including making conncection with suitable size of copper lugs complete all as specified & as directed. |
| 203 | Supply and fixin replacement MCB SPN \"C\" series,40 to 63 Amps, 10kA capacity,240volts, including making conncection with suitable size of copper lugs complete all as specified & as directed. |
| 204 | S&F in repairs sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way,protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 200 Amps rated copperbusbar, with Neutral bar, Earth bar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 205 | S&F in repairs sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 4 way,protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 200 Amps rated copperbusbar, with Neutral bar, Earth bar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 206 | M&L for sub main wiring with 2 runs of 6 sqmm, single core, FRLS PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductormulti stranded drawn in and including concealed 20 mm dia non metallicPVCconduit conforming to IS-9537with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core FRLS PVC insulated & unsheathed copper conductor cable as continuos earth wire connected to earth dolly and connecting to existing main switch board / distribution board of each building and testing on completion all as specified and as directed.Note : Three runs of 6 Sqmm cable and one run of PVC conduit will be measured as one Rm unit. |
| 207 | M&L for sub main wiring with 2 runs of 4 sqmm, single core, FRLS PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductormulti stranded drawn in and including concealed 20 mm dia non metallicPVCconduit conforming to IS-9537with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core FRLS PVC insulated & unsheathed copper conductor cable as continuos earth wire connected to earth dolly and connecting to existing main switch board / distribution board of each building and testing on completion all as specified and as directed.Note : Three runs of 4 Sqmm cable and one run of PVC conduit will be measured as one Rm unit. |
| 208 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300 mm sweep with, blades, and frame and louvers including electrical connection with PVC 1.5 sqmm 3 core wire from ceiling rose to Exhaust Fan complete all as specified and as directed by Engineer in Charge. |
| 209 | Supply and fix in repair exhaust fan, steel body AC single Phase, 230V of size 450 mm sweep with, blades, and frame and louvers including electrical connection with PVC 1.5 sqmm 3 core wire from ceiling rose to Exhaust Fan complete all as specified and as directed by Engineer in Charge. |
| 210 | Supply and fix wall mounted fan 400mm sweep, 240 volts, 50 Hz, 1350 RPM and connecting up complete with accessories all as specified and directed. |
| 211 | S&F in replacement security light of building with single piece, new generation energy saving and environmental friendly long life LED 35W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07including one bracket made of Light gradeGI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of MSFI 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminium cable all as specified and as directed.Make : Havells Cat No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model of makes specified. |
| 212 | S&F security light of building with single piece, new generation energy saving and environmental friendly long life LED 35W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07including one bracket made of Light gradeGI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of MSFI 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminium cable all as specified and as directed.Make : Havells Cat No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model of makes specified. |
| 213 | M&L in replacement earthingwith galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia, by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GImedium grade protection pipe,including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4)cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh andearth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 m, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point including testing on completioncomplete all as specified and as directed. |
| 214 | M&L for earthingwith galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia, by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GImedium grade protection pipe,including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4)cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh andearth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 m, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point including testing on completioncomplete all as specified and as directed. |
| 215 | Supply and laying in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade ofsize 10 sqmm 2 core complete all as specified and as directed. |
| 216 | Supply, installing, connecting, testing and commissioning of electric water heaterstorage type capacity 50 Liters 5 star rated with inner body glass coating technology, resistance,heavy duty protective anode protect the inner container from corrosion,Energy saving high density PUF insulation stores hot water for longer time, precaliberated thermostat, safety valve, fire retardant power cord, Corrosion proof outer body, Colour changing indicator, Heavy duty copper heating element with rated voltage 2 KW, 230 volt, 50 Hz of thermostat cutout temperature 75 degree Celsius, High working pressure of min 0.8 mpa,vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with water and electric connections including hot and cold connection pipes complete all as specified and as directed.MAKE: Havells Fabia Ec Model No :GHWAFATWB025 or equivalent Model of make Bajaj,Usha,Crompton. |
| 217 | Supply and laying Double Walled Corrugated (DWC) HDPE pipe dia 32mm as per IS:16205 Part-24including 90 degree bends with coupler and rubber ringlaid in trenches for cable protection complete all as specified and as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
