|
| 1 | High pressure cleaning of various capacity Window / Split / Tower AC of all size by using high pressure water jet cleaning machine mixing of cleaning agents and AL-Cleanoil coil cleaning chemical altra shinei/c sundries and transportation charges of AC mechanic as required. |
| 2 | Onsite technical inspection for R/M of various capacity Window / Split / Tower AC of all size by AC mechanic with all required testing tools, Dismantling of defective PCB/ fan motor/ compressor/ capacitor/ contactor/ defective circuit/cardand identification of fault i/c removal of defective part and deposit in engneering store i/c transportation charges of AC mechanic as required. |
| 3 | Providing and replacement of suitable capacity /size of fan motor for 1.5 ton / 2.0 ton Split/Tower AC including connecetion and testing etc as per requirement. ( Make : Carrier/LG/Voltas/Same specification make) |
| 4 | Providing and replacement of fan blade suitable for 1.5 ton / 2.0 ton Window/Split/Tower AC including fitting and testing etc as per requirement. ( Make : Carrier / LG / Voltas / Same specification make) |
| 5 | Providing and replacement of blower motor suitable for 1.5 ton /2.0 ton Window/Split/Tower AC including fitting and testing etc as per requirement. ( Make : Carrier/LG/Voltas/ Same specification) |
| 6 | Rewinding of fan motor i/c replacement of bush/bearing, shaft, oiling & greasing as reqd. for 1.5 ton /2.0 ton Split / Tower AC including connecetion and testing etc |
| 7 | Providing and replacement i/c dismentlingand installation of PCB Circuit suitable for 1.5 ton /2.0 ton capacity as per requirement. |
| 8 | Testing/repiring i/c dismentlingand installation of PCB Circuit suitable for 1.5 ton /2.0 ton capacity as per requirement. |
| 9 | providing and installationi/c dismentling if required wall mountedoutdoor stand suitable for 1.5 ton /2.0 ton capacity split air conditioner as per requirement. |
| 10 | Providing fixing/ replacement of heating /cooling sensor suitable for 1.5 ton /2.0 ton Window/Split/Tower AC as per requirement. ( Make : Carrier/LG/Voltas/Same specification make) |
| 11 | Providing /fixing of Air filter suitable for 1.5 ton /2.0 ton Window/Split/Tower AC as per requirement. ( Make : Carrier / LG / Voltas / Same specification make) |
| 12 | Providing and replacement of capacitor unit of 50MFD suitable for compressor of 1.5/ 2.0 Ton Window / Split / Tower AC making all connection & earthing.( make : Havells/epcos/Tibcon) |
| 13 | Providing and replacement of capacitor 2.5/4mfd/6mfd suitable for 1.5 ton /2.0 ton capacity Split / window / Tower AC as per requirement(make : Havells/epcos/Tibcon) |
| 14 | Providing testing replacement including installation of 1.5 ton capacity compressor including suitable gas charging pipe welding etc as per requirement Compressor make : kirloskar/blue star/toshiba/hitachi/LG/Emerson/Danfoss |
| 15 | Providing testing replacement including installation of 2.0 Ton capacity compressor including suitable gas charging pipe welding etc as per requirement Compressor make : kirloskar/blue star/toshiba/hitachi/LG/Emerson/Danfoss |
| 16 | Providing and filling of fresh refrigerant (R-22/R-410/R-32 etc) suitable for 1.5ton/2.0 ton air conditioner as per requirement includingTesting and Repair ofleakage of 1.5 ton /2.0 toncapacitywindow/split/tower AC unit. etc as required |
| 17 | Providing and fixing of single phase contactor suitable for 1.5 ton /2.0 ton AC as per requirement |
| 18 | Providing and fixing of outdoor heating coil suitable for 1.5 ton capacity window/split/tower AC as per requirement |
| 19 | Providing and fixing of outdoor heating coil suitable for 2.0 ton capacity window/split/tower AC as per requirement |
| 20 | Providing and replacement of suitable capacity /size of outdoor fan motor for Split duct AC including connection and testing etc as per requirement. |
| 21 | Providing and replacement of outdoor fan motor blade suitable for Split Duct AC including fitting and testing etc as per requirement. |
| 22 | Providing and replacement of Filter Drier suitable for fixing in line with 5.5 tr compressor including fitting and testing etc as per requirement. |
| 23 | Providing and replacement of Expansion valve suitable for fixing in line with 5.5 tr compressor including fitting and testing etc as per requirement. |
| 24 | Rewinding of outdoor fan coil unit motor i/c replacement of bush, shaft, oiling & greasing as reqd. for Split duct AC including connecetion and testing etc |
| 25 | Providing testing replacement including installation of 5/5.5 ton capacity compressor including suitable gas chargingetc as per requirement make : kirloskar/blue star/toshiba/hitachi/LG/Emerson/Danfoss |
| 26 | Providing and fixing of three phase contactor suitable forsplit Duct ACas per requirement |
| 27 | Providing and fixing of NO & NC Add-on block suitable forsplit Duct ACas per requirement |
| 28 | Providing testing replacement including installation of 12 ton capacity compressor including suitable gas chargingetc as per requirement make : kirloskar/blue star /toshiba /hitachi/LG/Emerson/Danfoss |
| 29 | Providing and replacement of Filter Drier suitable for fixing in line with 12 Tr compressor including fitting and testing etc as per requirement. |
| 30 | Providing and replacement of Expansion valve suitable for fixing in line with 12 tr compressor including fitting and testing etc as per requirement. |
| 31 | providing and filling of Nitrogen gas cylinder for checking of leakage (7 cum capacity) |
| 32 | Providing of miscellaneous items for repair maintenance of AC\"s |
| 33 | i) Brazing Rod |
| 34 | ii) Gas Torch/can |
| 35 | iii) Valve 3/8 |
| 36 | iv) Dead nut |
| 37 | v) Copper pipe of 1/2 & 1/4 with insulation |
| 38 | vi) Insulation 9 mm thick 2 mtr long |
| 39 | vii) Packing Tape (2\" width length 25-50 mtr) |
