Construction Of Wooden Almirahs, Salves, Boxes And Computer Desks At Office Of Bolpur Sub- Division Within Birbhum Division, Phe Dte., bolpur-West Bengal

Construction Of Wooden Almirahs, Salves, Boxes And Computer Desks At Office Of Bolpur Sub- Division Within Birbhum Division, Phe Dte.- 1 Supplying Godrej mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete. 2 Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/ Lipping]In Ground Floor.(i) 12mm 3 (ii) 19mm 4 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make,brand, finish and thickness with fitting, fixing the same on Particle/ MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge 5 Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white.a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqmi) Top, bottom & side member 6 ii) Intermediate member 7 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete.(a) With continuous plate base (Hexagonal/ Round rod) (i) 125 mm grip x 12 mm dia rod. 8 Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws.(i) 100 x 75 x 4.0mm. 9 Anodised aluminium barrel / tower / socket bolt (fullcovered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (i) 200mm long x 10mm dia. bolt. 10 M.S. or W.I. ornamental grill of approved design,joints continuously welded with M.S. WI flats and bats for winding,drilling etc.fitted & fixedwith necessary screw and lugs in ground floor.a) Grill weighing above 10 Kg/Sqm upto 16 Kg/Sqm(in Kg) 11 Add: GST @18% on sum of Item No. 1 to 10 12 Add: Cess @1% on sum of Item No. 1 to 11

Refer document

INR 3114.0 /-

INR 1.55 Lakhs /-